Notes

13 Things You Should Know About Double Glazing Lock Repairs That You Might Not Have Known
Double Glazing Lock Repairs

Quality locks on your windows and doors will help prevent burglars from entering your home. They usually don't want to break glass or try to get through windows that are open.

Some owners of double glazing, however, have had issues with their door or window lock after installing. Luckily, these problems can be fixed without having to pay for new double glazing.

Broken or faulty locks

A locksmith can repair your uPVC window or door lock if it's damaged or is not working properly. They will be able to fix the hinges, striker plates and locks on your double-glazed. They can also move the cylinder around to fix any misalignment issues that may be causing your handle to not work correctly.

The mechanism might be jammed if the key fits in the lock, but it does not turn or become difficult for you to insert. This could be due to grime or dirt getting stuck within the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. It is crucial to use a dry lubricant, such as teflon or graphite instead of oil which attracts dirt and stick to the inside of the mechanism. After lubricating the lock, you must insert the key and then try to turn it. The lubricant needs to be absorbed into the mechanism, and the lock should be able to turn effortlessly.

A faulty lock can also be caused by loose screws in the lock mechanism. They may loosen, fall out, or even break completely, preventing the lock to function properly. The screws can be tightened using a screwdriver, but you must be cautious not to tighten them too much. This could cause damage to the internal components.

A damaged lock could be dangerous for both you and your family, particularly if you have young children. It is possible for them to open the door without your knowledge, and this can give them access to your home. If you're worried that this might occur, a licensed professional locksmith can assist you re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix all kinds of damaged and damaged mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also reconfigure the locking system on your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always required.

Handles that are broken or damaged

A lot of double-glazed windows come with a multi-point lock as a part of the overall security package. This is an excellent option for those concerned with criminals who are looking to gain access to your home. It's also worth asking your locksmith about anti-lift blocks that can be installed on top of the existing locks and ensure that your window is secured in its closed position.

Handle locks can be damaged or fail. They are the first component that criminals utilize to force open your window. Fortunately, the good news is that this is one of the most simple parts to fix.

Modern uPVC handles and aluminum handles are equipped with the multi-point locking mechanism referred to as Espagnolette which is designed to prevent forced entry. This upgrade to security is typically provided as an additional option on new uPVC window installation. click over here and aluminum handles can be upgraded to lock systems that shoot bolts, again as an optional option on double-glazed window installations.


If a handle is damaged, it's crucial to get it repaired as quickly as possible. The damaged handles could stop the window from closing properly and allow drafts to get in. It could also be a weakness that opportunistic thieves could exploit, putting your family's belongings and your personal belongings at risk.

To repair the broken mechanism, you must first gain access to the window frame, then take off the broken handle. The gearbox that opens the handle is accessed and the type identified so a replacement can be sourced which matches the profile of internal window frame mechanism.

Once the mechanism is replaced, the handle can be fixed using the original screws - however, we generally recommend replacing them with larger ones since this will provide an even more secure fit. The final stage is to apply a coat of clear sealant to shield the handle from further rust. After this step is completed your window will be functional again, and at a fraction the cost of replacing it.

Hinges that are broken or damaged

If your windows do not close properly, you may be experiencing draughts, an affliction of your home's security, and an increased risk of water or damp damage. Window hinges that fail or fail are a common problem and can be fixed easily.

If you have a uPVC window that won't close or open and close, it's likely that your hinges are broken or damaged and need to be replaced. While most window manufacturers require you to purchase a new window unit in order to solve this issue We're able to repair the hinges that are damaged and save you money.

Window hinges can often break due to repeated use or could be weakened by corrosion over time. In the event of a broken hinge, it is important to take measures to prevent further damage by taking care not to force the window open or closed.

Knowing the type of hinge you have will help you identify the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to consult an expert in this situation to ensure that you don't make the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.

The hinges that are not working properly can be a huge issue for uPVC doors and windows. They can be a major source of noise, and they can also allow water to infiltrate which could damage your windows.

To fix this issue, first make sure that the pin barrel on both hinge halves is aligned. If it's not, tap the headpin with a hammer in order to make an incline in the hinge barrel. This will help keep the pin in place. Then, ask a helper to hold the door while you remove the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges using those that are the same size and attach the screws using glue. Finally, while the glue is drying, fix the hinges using clamps or weights.

Once you have repaired your hinges, you are able to put the door back in place. You can also attach the handle. It is recommended to replace the screws with the same length of wood dowels as the original screw, so that they align with each one.

Broken or damaged glass

uPVC Windows can be damaged over time, even though they are extremely effective in keeping out the cold and keeping warmth. This can include broken or damaged glass as well as defective locks. This issue can be costly should it be not addressed. It can also affect the aesthetics of your home and cause a loss of insulation. It is crucial to repair any damage immediately.

If the glass is broken but isn't shattered it is usually possible to repair it yourself with the proper tools and methods. First, make sure the surrounding area around the glass is clear so that any shards don't cause injury to anyone or are an accident hazard. Then, remove any broken glass pieces and dispose of them in the appropriate way. Apply masking tape across the entire area. This will prevent glass shards from sticking to your skin and scattering when you move them. If you're dealing with a double-pane window it's best to pre-fit the pane of glass before glueing it back in place so that you know you'll have enough space to complete the task.

Before applying the glue, wipe the surface of the damaged frame and the glass with a dry, clean cloth. Follow the application and curing instructions that differ from one product to the next. Based on the degree of the crack you may need to clamp the glass during the curing process with lightweight clamps specifically designed to support fragile materials.

After the adhesive has fully cured, carefully reinstall the glass in the window frame, making sure that it is flush with the edge of the frame, and there aren't any gaps between the glass and the window sash. Avoid bending the glass as you install it again because this could weaken the seal. This could result in condensation or water infiltration.

If you have a glass door that's completely broken or has larger cracks, contact a professional glazier such as O'Brien(r) to arrange a replacement. If you leave broken glass unattended, it could cause danger to pet and children and is why it's important to act swiftly.

My Website: https://digitaltibetan.win/wiki/Post:11_Strategies_To_Refresh_Your_Double_Glazing_Condensation_Repair_Kit