Notes

A Trip Back In Time: What People Discussed About Upvc Window Replacement Hinges 20 Years Ago
Choosing Upvc Window Replacement Hinges

Selecting and fitting upvc windows replacement hinges isn't as difficult as you might imagine. It is crucial to ensure that the arrows on the hinges is facing the right way and also the thickness (13mm or 17mm) of the hinge arm on the open frame.


There are many different kinds of hinges to pick from, each one with distinctive features. This article will focus on the most popular types of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

These are a great choice for replacing or upgrading your fire escape safety window as they open to a full 90 degree angle. They can also be lowered into an 'easy clean' position so that you can easily access the exterior of windows to clean them without climbing an overhang or climb a ladder at potentially hazardous angles.

Yale is among the most reputable and well-known brands in the field of home security. They can be used with all kinds of uPVC side-hung windows. They can be moved to the easy-clean position by pressing the small button and sliding the window sash over to one side. After closing, the window sash will revert to its original position.

They are available in both 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you determine the best product for your window.

The hinges are designed to be used with standard side-hung frames that is made of aluminium or uPVC. They are equipped with an easy-to-use friction screw to alter the amount of resistance that is generated. This allows for easier opening of the window and reduces the risk of a mishap during high winds. They have been tested to more than 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to operate and does not have buttons or catch. It offers a convenient and safe solution for emergency exit and cleaning. Use the hinge retention clip located on the inside of the bottom corner. Repair My Windows And Doors will release both the top and bottom catches which will allow you to slide the sash to the easy-cleaning position. Close the window after you have the sash in the easy-cleaning position. This will reset the hinges to their exit positions.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace windows that open sideways to allow egress (fire safety) reasons. These types of window hinges open more wide and faster than normal hinges, allowing an open space to escape in the event of an incident of fire. This type of hinge is required in any habitable room that has a window, as required by building regulations.

They have an exclusive friction stopper that allows the window to open at an angle of 90 degrees. It also allows the sash opening to slide across when open to make it easy to clean the exterior side of the glass without having to climb ladders. The hinges are easy to use and have no complicated buttons or catches. They can be operated from inside of the house using an easy, safe lever.

The hinges are made in the UK by Cotswold and come complete with a child safety restrictor for use throughout the day that can be reverted with a hidden button, giving you peace of thought that your children won't accidentally open the door too far. They are available in 13mm and 17mm stack heights.

To purchase these hinges, measure the length of your current side hung window hinge that attaches to the frame (see the article on measuring your upvc window hinges). Then, select the appropriate size hinge from the selections below.

Be aware that the measurement is taken from the part that fixes to the frame, not the sash, the actual hinge length could be shorter or longer based on the manufacturer of your old windows. Also, when choosing the size of your hinge, most windows made of upvc will have a 13mm stack height. However, should your old frame has 17mm, then select the option for this. You can also utilize the 4mm packer in order to compensate for the difference. All hinges come with two hands (1 left and 1 right). Screws are not included in the hinges. They can be purchased separately if needed. Our upvc window repair screws are recommended. These are specially made to improve the performance of your hinges, allowing them to operate efficiently for a longer. They feature a less friction design and an improved weather seal with a new nylon reducer end cap.

Restricted Hinge

Standard hinges can make it difficult to open windows completely. These restricted child safety friction hinges are a solution to this issue and are a great solution when ventilation is required but access to clean up or escape in the event of fire isn't possible. They restrict the amount of opening the sash, and permit the override of this limitation by pressing the button. They are suitable for both top and side hung windows. They are available in 17mm and 13mm stack heights.

The Nico Restricted Egress Friction Hinge blends the advantages of a standard restrictor as well as a fire escape hinge to offer an efficient and easy way to comply with building regulations. It is available in 13mm or 17mm stack heights and is suitable for the top and side openings of uPVC window. It comes in two pieces with one hinge being the restricted egress, and the other the unrestricted. This allows one to be installed at the bottom and the other hinge is placed on top.

These uPVC restricting hinges have been tested to BS6375, part 2. They are intended for use on a window that cannot be opened fully like a small children's bedroom. The mechanism restricts the distance the sash opens to an appropriate height of 100mm, and re-engages once the window is shut.

These uPVC hinges with friction can be used with any type of windows. They are especially useful for windows that are difficult to reach, like those in three-storey apartments or those which would require the use of a ladder. They can be paired with our selection of security features like hinge guards and protection plates, or dog bolts for PAS 24 performance.

When replacing a window hinge it is essential to determine the length of the current hinge so you can order replacements that match in size. This can be done by looking through the image gallery of the hinge before deciding where you would like it to be. Top-hung hinges are limited on both sides and the side hung hinges can only be used to one side.

Standard Hinge

Standard hinges feature metal-to-metal contacts and do not require additional components to reduce friction. It's available in a range of finishes and is also fire-rated. To quickly determine the radius of a hinge, lay it out flat and align a quarter dime in two corners. If the quarter fits better then the corner should be rounded to 5/8 inches.

Selecting the right hinge can be the difference between making or breaking your door's appearance. The style and finish of the hinges to your door will give it a cohesive and attractive look.

Read More: https://www.repairmywindowsanddoors.co.uk/hackney-window-hinge-repairs-near-me/