Notes

It's The Window Handles Case Study You'll Never Forget
Upvc Window Handles Replacement

The replacement of your window handles made of upvc is a relatively easy process that requires just a few tools and steps. To ensure a successful replacement, you should first identify the type of handle and determine the spindle size.

There are two types of upvc handles; Espag and Cockspur handles. Espag handles come with a 7mm square spindle that connects to the locking mechanism that is fitted to the frame.

Espag handles

Espag handles are one of the most popular types of window handles that are available for upvc windows and some timber frames as well. They are designed to be used with espagnolette multipoint locking systems. The handle features a 7mm square shaft that protrudes from the back and is then placed into the gearbox for an interlocking system that is multipoint within the window. They also come in a variety of spindle lengths. This is because every type of window handle is anchored to a multipoint locking system with the same layout, but with a slight variation.

The standard specifications for an espag windows handle include a push button to lock the window in the closed position. They also have a key-locking feature and, if required the fire escape non-locking feature. Some even exceed Secure by Design standards which will provide you with peace of mind. They are typically attached to the sash with two screws that are 43mm apart.

There are a few variations to the espag window handle particularly the in-line versus the cranked version. In-line handles can be turned left and right. Cranked handles are only operable when the window is moving in the same direction. They can be set up clockwise or counter-clockwise. The handles can be fixed to the window in either direction but they must be pointing in the same general direction as the old handles on the cockspur.

The main thing to remember when choosing a replacement window handle made of upvc is that you make sure you measure the spindle length. The spindle is a steel bar that protrudes out of the back of the handle. It can range in length from 10mm up to 55mm. It is the length that is exposed when the handle is together in its unbroken state. It is important to measure this when buying a new handle as the spindle drives the lock inside the window.

Certain manufacturers now offer magnetic espag handles that eliminate the need to cut the spindle to size. This can streamline the process of fitting, making it easier and quicker to remove and put in an alternative. It is still best to to check the spindle length because this will ensure the smooth operation of the handle.

Cockspur handles

Cockspur handles are found on older uPVC and aluminium windows and they don't have an internal locking mechanism, however they are considered safe because the handle nose closes to a wedge-shaped block which is fitted into the window frame (this type of handle should not be confused with timber windows, where there is an opening instead). Cockspur handles are still popular and there is a wide range available to match the styles of doors.


They are a cost-effective and easy option. They can also be key-locked to meet insurance requirements. There's also a selection of handle nose sizes to match different frames. A lockable version, that adds an extra level of security and has been endorsed by Secured by Design, is also available.

These handle types are affixed to the sash of the tilt-and-turn or casement windows using a spindle that runs through the baseplate. The handle is operated by the lever that is located on either side of the handle. the handle spindle is then engaged with the wedge striker which is attached to the frame of the window to secure it. Cockspur handle kits are typically supplied with the right and left hand versions and there is a wide selection of nose heights to fit the majority of frames.

The most important thing to consider for an effective installation of cockspur handles is getting the right size wedge block. This is simply a small block of plastic that is shaped as ramps. You can replace the existing handle with one with a slightly larger size to ensure that the handle closes correctly across the gap in the window, sealing it against draughts. There is some standardisation of fixing locations for these handles and they are usually 38mm and 58mm, so you will be able to locate the correct replacement without much trouble.

Another thing to think about when selecting the new set of cockspur handles is the length of the spindle. This is the length of the baseplate of the handle up to the point at which the shaft of the handle extends down through the sash and into the frame. It is vital that it is precise to ensure that the handles work smoothly.

Turn and tilt handles

These handles are designed specifically for tilt-and-turn windows. They are available in nonlocking, locking, or tilt safe choices. They are heavyweight operating handles with a solid grip and detents in 90 degrees. They are available in a variety of finishes, including white, black, gold and chrome, as well as brushed satin. It is compatible with Timber or PVCu tilt-and-turn windows.

visit my web page can be used to replace the upvc cockspur on older windows that don't have locking. However, you should be aware that these handles are different from espag handles made of upvc because they're not locked and operate differently.

They have an 'turn before tilt' mechanism which allows windows to be opened inwards, and then dropped into a hopper or ventilation style position to let fresh air in. This kind handle is also known as a DK or dry-keep window handle and is often used on older double glazed windows in residential or commercial properties.

There are a lot of things to consider when you are replacing a tilt and turn window handle. First, you must ensure that the handle you pick is compatible with your windows. This includes examining the size of the spindle. The spindle length is the length of the metal rod that extends from the handle and into the locking mechanism. The longer the spindle is, the more security it will provide.

Handles are typically fixed to the window frame or base with screws that are placed above or below it, depending on how the window is constructed. The screws can be removed using a screwdriver, and then the handle can be removed. It is recommended to open the handle first to make it easier to reach both screw holes.

After you have removed the handle, there will be two screws that must be removed. These decorative screws will then be revealed. The handles can be removed by unwinding them using a flathead screwdriver. Once the handles have been repositioned on your windows, you can put them back in place by replacing the cap on the screw.

Measure the spindle length

The spindle of a window handle decides the method by which it opens and shut. It's important to measure your handle's length and compare it to the spindle length of a new one. This will ensure your new handle will fit in the window properly, and be easy to open and close.

If you're looking to replace your handles or simply enhance the look of your uPVC window the style of the handle will have a major impact on the way the window opens and locks. There are numerous types of handles, including inline espagnolette, cranked, and key locking. There are also tilt-turn handles designed to be used with a tilt-turn uPVC window that opens in both directions.

To replace the window handle, first locate the screw caps which hold it in place. These are usually located above or below the window handle and can be removed using a screwdriver. Once the screws are removed, you are able to remove the handle and spindle from the window frame.

The handle can be removed from the window frame, and replaced with a brand new one. Make certain that the new handle is put in the same spot as the handle that was previously used and that the spindle aligns properly with the lock mechanism. Once the new handle is in position, you can insert the screws and fix the handle. If you have screws that are missing You can replace them.

It may be necessary to change the handles on your uPVC window in the event that they break. The handle might break because of a strong impact or the female portion which the spindle is placed into could be worn out. The latter can be caused by someone in your household forcing the handle when it's locked.

The best way to replace your uPVC window handle is to purchase a high quality one that lasts for a long time. This will save you money in the long run. It will also give your house a an attractive and modern look.

Website: https://www.repairmywindowsanddoors.co.uk/farnborough-window-handle-replacement-near-me/