Notes

25 Surprising Facts About Replacing Window Handle
Replacing Window Handle

Over time, the window handle can be damaged by frequent use and exposure. This can lead to the handle becoming loose or wobbly, making it difficult to open and close your window.

Replacing your window handle is a simple job that can be done in a matter of minutes. The key is to remove the screws holding the old handle, and then find the replacement.

Identifying the Handle

The window handles you choose might seem like a minor aspect, but they could make a huge difference to the appearance of your windows. The best handles are able to seamlessly match the style you have chosen, elevating the appearance of your home and enhancing its beauty. A poorly-matched handle, on the other hand can be a nuisance and disrupt the harmony of your home.

It is crucial to determine the window handle you have before purchasing replacements. This will ensure that the new handles you purchase are compatible with your existing uPVC windows and will meet your expectations in terms of performance and aesthetic.

Window handle designs can range from traditional sash-lifts to modern tilt and turn designs. The most popular types of window handles include:

Espag Window Handles

The handles are fitted with a mental spindle which is attached to the back of the frame and controls the window mechanism. The handles are held in place to stop them from moving when they are used. This kind of window handle is seen in many modern homes.

Cockspur Window Handles

With intricate designs and antique finishes, cockspur handles add charm to traditional or classic homes. They are available in a variety of colors, so you can find one that perfectly matches your existing decor.

Casement Window Handles

This kind of window handle can be found on both casement and awning Windows. The simple crank enables the windows to be opened and closed effortlessly. This handle is present in a variety of American homes including modern farmhouses and suburban one-story homes.

Remove the screws from the bottom of the handle, and store them safely. Also, note Replacement Double Glazed Window Handles dover Repair My Windows And Doors of the spindle, since this will be a key factor when determining the right size handle for your windows. Once you've identified the type and size of handle you want you can start looking for the new one. If you are buying the new handle, make sure that the spindle is of the same length as the one you have previously. If you're not sure about the spindle size it is recommended to buy one with an adjustable spindle.

Identifying the Length of the Spindle

It is important to measure how much the spindle extends from the base when replacing the window handle. This will help you find the correct replacement. The square peg on the back of the handle will typically be connected to the spindle using either a screw or a pin. Take off the old handle and then locate the screw or pin and use a screwdriver to remove it. Remove the spindle in a careful manner and note the length the metal bar it is connected to.

The spindle size will help you determine the kind of handle that is placed on your uPVC window. This is important, as each handle fits within the uPVC frames in a distinct way. For instance, older handles have spurs that extend and secures over the wedge striker. Cockspur handles are the name they're given and should match when replacing. The spindle is covered with a sleeve on newer handles.

Knowing the handle type that you have installed in your uPVC windows will help you ensure that the replacement is an exact match. You should also take into consideration the handle's handing. Handles that open in a clockwise direction are left-handed. The ones that open in the counter-clockwise direction are right-handed.

Another key factor to consider when determining the type of uPVC window handle is the step height. The step height is the distance between the handle and the back of your window frame. Measure this, then order a new handle with the same step height to ensure it is sized to fit into the window frame.

The procedure of replacing the uPVC window handle is fairly easy, particularly when you know the correct part number. After removing the old handle and replacing any screws visible with screw covers. Then, take a close look at the bottom of the handle to locate any fixing screws hidden underneath it. Remove the screws with a screwdriver, pliers or other tools. Then pull the handle from the window frame.

Identifying the Screws

Although window handles are often omitted but they are an essential part of your windows both in terms functionality and aesthetics. It's not a surprise that window handles may become damaged and require replacement. It's fairly easy to replace a window handle. But, it's essential to determine the type of handle you have before you can replace it. Not all uPVC handles are of the same dimensions, so you'll need to ensure that the new handle fits in the holes that are already there and that the rod (spindle) is the correct length.

Once you've determined what kind of handle you have, you can disassemble it and take out the old handle. You'll need patience as well as a screwdriver to do this. The handle is attached to the frame's base with a screw or pin which can be removed from the outside. Once the handle is removed, you can start dismantling the fixing pins or screws that hold it to the frame. They are located in the holes that are dotted around the handle's base. After these holes have been cleared the handle can be pulled off and the spindle pushed through from behind to secure it in the right position.

After you have removed the handle, you'll have to determine the length of the spindle using something in the middle of the hole. Then, you can check the label on the handle to ensure it's the correct size for your windows. You can also drop something in the hole to measure its depth, and then determine the size spindle to buy.

Once you've established the length of the spindle, you're able to start putting into your new handle. Just line up the fixing holes with those on your window frame, then put in the screws or pins to tighten them. Don't over-tighten them, as this could cause the handle crack or begin to warp. After you have installed your new handle check it by opening and closing the window several times.

Identifying the Window Frame

If your window handle made of uPVC falls off it can be extremely frustrating and can appear inoperable. It is more likely that the handle has lost its grip. This can be easily repaired by following a few easy instructions. Recognizing the type of handle you have is crucial as there are many different types of handles for double-glazing windows, and some are specific to particular manufacturers. It will be easier to find the right replacement handle if it is easy to determine the model.


In the majority of instances, the handle is held in position by screws located beneath covers to either on either side. The covers can be removed using a screwdriver to reveal the screw holes. Make sure to keep these screws covered because you will require them when you install the new handle.

After taking off the screws and the screws, you can take off the handle. After removing the handle, you will see the spindle which runs through it and into the lock mechanism inside the window frame. It is important to make sure that the spindle is the same length as the original handle when purchasing a replacement. To do this you can look at the old handle or drop something into the center of the hole to see how far it goes. Once you have the correct size spindle, you can place the handle on the window. Attach it using screws or pins.

The majority of the time when a window handle breaks it is because of a lack of maintenance such as cleaning or lubrication. Over time this can cause the handle to degrade and cause premature breakage. The handle can also be subjected to additional stress if it's not correctly fixed or aligned with the window frame. The handle can be put under pressure that could cause it to break. Regular maintenance and making sure the handle is correctly fitted can stop this from happening.

Homepage: https://www.repairmywindowsanddoors.co.uk/dover-window-handle-replacement-near-me/