Notes

Think You're Cut Out For Upvc Window Handle Replacement? Take This Quiz
uPVC Window Handle Replacement

Window handles may wear out or break due to constant use and exposure to weather. In these instances the best choice is to replace the handle.

Upvc handles come in many sizes and styles. Older windows had cockspur handles, which were available in various steps heights. Newer windows have Espag handles that come with standard 43mm centres and 2 fixings. Make sure you check the spindle on the handle you currently have to ensure that you're getting proper size.

Removing the Old Handle

UPVC handles are designed to last a long time, but they can break due to heavy use, age or exposure to elements. Thankfully, replacing them is an easy and cost-effective option. Using Replacement uPVC Window Handles hoddesdon Repair My Windows And Doors and procedures will ensure that the new handle is correctly installed.

Before you start, make sure that the new handle you're purchasing is compatible with your UPVC window style and features. Check that the screw holes and spindle length match, and that the handle functions smoothly when you turn it to engage the lock mechanism. Test the handle by turning it and ensure that it opens the window and closes it smoothly.

To replace the handle on a upvc frame window, open the window and then access the frame. Look for the screws that hold the handle to frame. They usually are situated above or below the handle and are covered with caps or covers made of plastic. Carefully pry off the covers using a flathead screwdriver to expose the screws beneath. Once you have removed the screws and removed the screws that attach the handle to the frame and then the handle itself. When you remove the handle, be careful to avoid it falling on the glass or damaging it.

When you take off the handle, take note of the location of the hole for the spindle (the metal bar that runs through the middle of the window handle). This will be important when installing your new window handle.


The length of the spindle is typically printed on the base or packaging of the UPVC handle. The spindle length measures how the handle's spinel extends out from its base and how far the spinel fits into the UPVC window. You can also take measurements of another handle on the window to determine the length your new UPVC handles should be. The handle should be similar to the previous one. The handle may not fit correctly, and it could even break.

Take a measurement of the Spindle

Whether you need to replace the handles on your windows because they have broken or are starting to show signs of wear it is crucial to select the right replacements. This is because a wrong handle can affect the performance of the window and increase the risk of breaking the glass. The primary factor to consider when selecting the ideal double glazing window handles for your home is the spindle length. This refers to the length of the spindle that protrudes from the back of the handle base or how far in the spinel extends into the frame. You can determine the type of handle by measuring the spindle of another handle.

There are many different kinds of handles made from upvc, each with their own distinct characteristics. Some can tilt the window to open, while others have locks to stop it from being opened by intruders or children. Some feature a cranked design that gives a greater hand clearance or can be installed inline instead of being mounted on the window frame.

It is important to consider the step height when selecting a new handle for your upvc windows. This is because the step height determines the type of handle you will require to put on it. The typical step height of a uPVC window is 21mm while aluminum and timber windows have a lower step of 9mm.

The spindle is a metallic bar which runs through the middle of the handle into the lock mechanism of the uPVC windows. It is important to check the diameter of the spindle prior to purchasing a new handle, as smaller diameters can cause the handle to not fitting properly. This could cause the lock to become damaged or unusable and the handle might not be able to open the window.

It is essential to use a small object to measure the spindle. A pencil or a piece paper will work well. This can be used to compare the measurement of a new window handle made of Upvc to make sure it fits the window.

Fitting the new Handle

Based on the type of handle, you'll need to replace it with a handle that matches your home's ironmongery and decor. It is also important to take into consideration whether the design of handle you're replacing is right for your window and the way it will be used.

If you're replacing a tilt-and turn handle, make sure you buy one that is able to unlock either way. It's important that you get the right hand or left hand handle, as if improperly installed, it may cause issues opening windows and limiting airflow.

To take off the old handle you will need to find the pins or screws that hold it in position. They are typically located within the window handle. They can be removed using a screwdriver. After the screws have been removed, the handle should fall off easily. If it doesn't, make use of a little force to remove it from the spindle and then remove it completely from the window.

If you are purchasing replacement handles, ensure that they have the exact step height as your current ones. The handle's nose can be measured using the ruler or tape measure. The spindle measurement is also crucial. It can be accomplished using a ruler or tape measure. It is the distance between the spindle of the handle and the frame of the windows.

The standard backset for cockspur and handles for epag is 43mm (2 fixings). You'll need to measure the original dimensions of the uPVC window to identify the correct replacement handles.

Generally, uPVC handles are either in-line or cranked. In-line uPVC handle are straight and can be turned left or right. Cranked handles work in a certain direction. Take into consideration the window's orientation and your personal preferences when choosing a new uPVC handles. If you prefer the look of a double-glazed window handle made of brass or chrome You can achieve the same style by purchasing a handle with the same appearance as the uPVC windows you already have.

Test the Handle

There are many handles available for uPVC Windows, and it is essential to select the best one. Choosing the best handles will ensure that your windows are secure and comfortable to use, making sure you get the most out of your double-glazing. It is also crucial to select the right handle for your window that complements the style of your window and will be compatible with the locking mechanisms that are in your home.

Espag Handles

The most common type of uPVC handle is the Espag handle, which comes with an internal lock mechanism within the handle itself. This makes it difficult for burglars to open the window. There are two kinds of Espag handles which are cranked and inline. Inline Espagnolette handles have a flat rectangular shape. They have a spindle that runs through the handle and is in contact with the locking mechanism of the window frame. In the same way, cranked Espagnolette handles are curved or angled design and operate in a similar way as inline handles.

If the window handle is damaged then you'll need to replace it. There are many alternatives for replacement available. It is important to select a handle that's suitable to your windows as well as the locking mechanism or type that you have in your home. Choose a handle made of high-quality materials to increase its longevity and resistance to the elements.

Make sure to check your windows regularly to ensure they're functioning properly and you're not losing energy or heat. Do not hesitate to call a professional if your uPVC window needs to be repaired. They'll be able to guide you on the best option for your home and provide an immediate, cost-effective solution.

The process of changing your uPVC window handle is an easy process that can be completed in a matter of two steps. By identifying the handle type and measuring the spindle and using the right tools and materials, you can make sure that your window is properly secured and comfortable to use.

Homepage: https://www.repairmywindowsanddoors.co.uk/hoddesdon-window-handle-replacement-near-me/