Notes

This Is The New Big Thing In Upvc Window Handle Replacement
uPVC Window Handle Replacement

Window handles may wear out or break over time because of continuous use and exposure to weather. In such cases, replacing the handle is the best option.

Upvc handles are available in many styles and sizes. Older windows had cockspur handles which were available in various step heights. Modern windows come with an espag handle with standard 43mm centres as well as 2 fixings. Make sure you check the spindle on the handle you currently have to ensure that you're getting the proper size.

Remove the handle that was previously used

UPVC handles are designed to last for a long time, but they may break from heavy usage, age, or exposure to the weather. click homepage , replacing them is a simple and cost-effective solution. Making use of the correct tools and procedures will ensure that your new handle is properly installed.

Before you start, make sure that the new handle you're buying is compatible with your UPVC window style and features. Check that the screw holes and the spindle length match and that the handle is operating smoothly when you turn it to engage the lock mechanism. Test the handle by turning it around and ensure that it opens the window and closes it easily.

To replace the handle on a upvc-framed window, open the window and access the frame. Look for screws securing the handle to the frame. These screws are typically located above or below the handle and secured under caps or screws made of plastic. Using a flathead screwdriver, gently remove the covers and reveal the screws underneath. After you have removed the screws' covers, remove the screws that hold the handle to the frame, and then the handle itself. When removing the handle be cautious to avoid falling and damaging the glass.

When you take off the handle, note the location of the hole for the spindle (the metal bar that runs through the middle of the window handle). This will be crucial when installing your new handle.

You'll need to measure the length of the spindle on your UPVC handle that is usually located on the bottom of the handle or on its packaging. Spindle length is the distance between the spinel of the handle and the base. It also measures how much spinel extends into the UPVC glass. You can also take measurements of another handle on the window to determine what length your new UPVC handles should be. Ideally, the handle should be exactly the same length as the previous one. Otherwise, the handle won't fit correctly and may break.

Measure the Spindle

Whether you need to replace your window handles because they have broken or are starting to appear worn, it is important to choose the right replacements. This is because a wrong handle can impact the performance of the window and increase the chance of breaking the glass. The spindle size is the most important aspect to take into account when choosing the right double glazing window handle for your home. This is the spindle length that protrudes out from the handle base, or the distance that the spinel extends into the frame. You can determine the kind of handle by measuring the spindle of another handle.

There are many different kinds of handles made from upvc, each with its own unique features. Some are able to tilt the window to open, while others feature locks to stop it from being opened by intruders or children. Some have a cranked style that provides a better hand clearance, or can be installed inline instead of being cranked onto the window frame.

It is essential to take into account the step height when selecting the handle you want to use for your windows made of upvc. This is because the step height determines what kind of handle you'll need to fit it. Typically, the step height of a uPVC window is 21mm while aluminum and timber windows have a lower step at 9mm.

The spindle of a upvc window is a bar of metal that runs through the center of the handle and into the lock mechanism of the uPVC window. It is crucial to determine the diameter of the spindle prior to buying the handle for the first time, as a smaller diameter can result in the handle not fitting properly. This can lead to the lock becoming damaged or not working, and the handle not being capable of opening the window.

When measuring the spindle, it is beneficial to have something small to work with, such as a pencil or a piece of paper, to ensure you get a true reading. You can then compare the measurement to the measurement of the new handle made of upvc to ensure it's the right size for your window.

Installing the New Handle

You'll want to pick an appropriate handle that complements the ironmongery in your home and the design. You'll want to think about whether the handle you're replacing will work with your window, and also how it's going to be used.

If you are replacing a tilt-and-turn handle, ensure you purchase one that can unlock either way. It's crucial to choose the left or right hand handle because if it's wrongly installed, it could cause problems opening the windows and restrict airflow.

To remove the old handle begin by locating the fixing screws or pins which hold it in place. They are typically located inside the window handle. They can be removed using the screwdriver. After the screws have been removed, the handle should slide off easily. If it doesn't, make use of a little force to remove it from the spindle, and then remove it completely from the window.

When you purchase replacement handles, ensure that they're the same step height as the ones you have. The handle nose can be measured using a ruler or tape measure. The spindle measurement is also vital. It can be measured using a ruler or tape measure. It refers to the distance between the handle spindle and the frame of the windows.

The handles of cockspur and espang come with a standard backset of 43mm (2 fixings). But, you'll need determine what the original dimensions of your uPVC windows is to determine the appropriate replacement handles for them.


In general, uPVC handles can be either in-line or cranked. In-line uPVC handles are straight and will turn left or right, while the cranked handles are designed for certain orientations. When choosing a new uPVC handle, consider what the orientation of the window is and what your preferred options are. If you like the look of a double glazing window handle in chrome or brass, you can achieve the same style by purchasing a handle with the same finish as the uPVC windows you already have.

Test the Handle

There are a wide range of handles available for your uPVC windows, which is why it is essential to choose the right one for you. Selecting the right handles will ensure that your windows are safe and easy to operate, ensuring that you get the most out of your double-glazing. It is also crucial to select the right handle for your window that complements the style of your window and will work with the locking mechanisms of your home.

Espag Handles

The most well-known type of uPVC handle is the Espag handle, which features a lock mechanism inside the handle itself. This increases security and makes it much harder for intruders to open your window. There are two main types of Espag handles that are inline and cranked. Inline Espagnolette handles have a flat rectangular shape. The spindle runs through the handle, and engages the locking mechanism on the window frame. Espagnolette handles with a curved or angle design function similarly to inline handles.

If the handle on your window breaks then you'll need to replace it. There are numerous replacement options available on the market, so it's important to find a handle that's both suitable for your window and suitable for the locking mechanism used in your house. Choose a handle constructed of top quality materials to increase its longevity and resistance to the elements.

Examine your windows frequently to make sure they are working properly and you're not losing energy or heat. If your uPVC windows are in need of repair, don't hesitate to seek out an expert. They can provide you with the best solution for your home, and provide a quick and cost-effective solution.

The process of changing your uPVC window handle is an easy process that can be completed in just two steps. By identifying the handle type and measuring the spindle size, and making use of the right tools and materials, it is possible to ensure that your window is secure and comfortable.

My Website: https://www.repairmywindowsanddoors.co.uk/salford-window-handle-replacement-near-me/