Notes

Replacing Upvc Window Handles Tips From The Best In The Industry
Replacing Upvc Window Handles

If you follow the right steps, replacing upvc window handles will be a simple task. Knowing the type of handle you have is vital as is determining the size of the spindle to ensure you purchase the correct replacement.

Start by opening the window to gain access. Next, take off any screw covers that are above or below the handle using a flat-headed screwdriver or butter knife.

Handle Identification

If your double-glazed window handle is broken or has become difficult to operate, it's time for a replacement. Luckily, replacing a window handle made of upvc is a DIY project that can be done quickly and cost-effectively. The key is identifying your handle's type and determining the length of the spindle to ensure that the new handle is a good fit. Here's how to do it:

The majority of uPVC window frames utilize either espag handles or cockspurs. Both have a mechanism that slots into a square rod within the frame of the window. The length of this rod determines the functionality of the window handle and whether or not it can lock. To check the functioning of the handle, try unlocking or turning it loose it and then see if you can open or close the window.

To replace a uPVC handle, you will have to open the doors to reach the screws that secure it to the frame. They are typically hidden under plastic screws that are simple to take off with a flat head screwdriver. Once the screws are removed, the handle should come away easily.

Before you begin screwing into the new handle, ensure that it's the exact length as the old one. You don't want to end up with a handle that is too short or too long, since this could cause issues with the operation of your window and lead to a premature breakage. To avoid this, measure the length of the spindle from the base of the handle to the top and ensure that your new handle has a matching length. You can also purchase the handle with spindles that are shorter or longer than the one that is required by your window.

Identifying the Spindle

If you are replacing your window handles, you must be aware of the kind of handle your window has. This will help you choose the appropriate replacement and ensure it fits properly. The process of identifying the type of handle is simple, and it's usually possible to do this by taking a look at the handles themselves. It's also a good idea to determine if the window has locks or not, as this could affect how easy it is to open and close the window.

If Replacement uPVC Window Handles hillingdon Repair My Windows And Doors is slack or does not turn in a straight line, it's a clear indication that it's time to get it replaced. This is true in particular when the window is difficult to open or close or difficult to unlock. It is crucial to replace the handle as fast as you can, prior to when it completely breaks. This can be dangerous for children and pets.

Take a look at the spindle of the handle prior to purchasing new handles made of upvc. It's located on the back of the handle base and is crucial to get it right to ensure that the new handle can fit properly. The cross-section of the spindle should be 7 millimeters.

Once you've determined the spindle's length Move the handle to the same location as the previous one. Make sure that it's in the open position, and then place the spindle into the same hole as the previous one was. Fix the new handle into place, and then replace any screws, if necessary. Before you wrap up your tools, test the new window handle to ensure that it is functioning smoothly and shuts the window correctly. It's also a good idea at this point to apply a silicone-based lubricant on the handle and any moving parts to make sure that everything functions as expected.

Unscrewing the Old Handle

Whether the handle on your window is broken or loose, or just not functioning correctly there are obvious signs that it's time to replace it. For instance, if it's difficult to open and close the window then this clearly indicates that the handle isn't working correctly. If the window lock does not lock when you turn the lock, this is also a clear sign that the handle must be replaced.

To change the window handle it's essential to be careful and take your time. The handles for windows are heavy and can fall on you if not careful. To remove the old handle, you'll need to take off the screws on the top and bottom. Once these screws are removed, you are able to unscrew and take the handle out of the window.

You can pick from a variety of sizes, types and finishes when it comes to choosing the right handle. It is essential to measure the spindle's diameter and determine the type of handle you want. This will determine the compatibility of a handle. be.


The right size and style of handle will ensure that it is simple to use and locks the window properly. The handle is inserted into a slot in the gearbox of the window. Moreover, if you try to install a handle that's not the right size, it could cause the window to stick or even break. Fortunately, changing the handle on your Everest uPVC windows is easy and takes about five minutes to do. It's a great option to give your window a visual upgrade and improve its functionality at the same time.

Installing the New Handle

It is essential to select the appropriate size handle when replacing window hardware. If the handle is not the right size, it will not fit well into the frame. This can lead to excessive stress and premature breaking. This is especially common when windows have to be opened and closed repeatedly.

The first step is to remove the screws that cover the cap caps which are located below and above the handle using a thin, narrow tool (for instance, a butter knife). This will reveal two screws that you will need to unscrew. Once the screws are removed, you are now able to begin removing the handle itself from the window mechanism. The handle should remain in place to prevent it from falling and injuring you.

It is important to measure spindle length prior to purchasing replacement upvc windows handles. This can be done by measuring the length of the spindle of the handle that was previously used. This information is important when selecting a handle since different types of uPVC have different spindle sizes.

Espag handles, typically found on uPVC windows, have a square 7mm spindle which activates the internal gearbox which operates the multipoint locking mechanism for enhanced security. Cadenza handles feature a blade that fits into the lock mechanism. They can differ slightly in their fixing centers between 58mm and 62mm depending on the design. Cockspur handles have a long nose that locks over the shootbolt rods and can also differ in their fixing centres between 43mm and 58mm.

Testing the Handle

When a window handle is replaced it is important to ensure that the new handle functions properly. It is essential to make sure that the new handle functions correctly. This involves turning the handle to activate the mechanism and ensuring that the window shuts and locks properly. The good news is that replacing upvc window handles is a straightforward procedure that anyone can perform. All you need is the proper tools, some patience, and a basic knowledge.

The first step is to open the window to get access to the screws holding the handle in place. They are usually hidden under caps or plastic screws that are easily removed with the screwdriver. Once the screws are removed, the handle should be easily removed of the window frame.

You'll then need to determine the type of handle installed on your window, then measure the spindle. This will permit you to buy a handle that is exactly the same size as your existing one. Espagnolette handles typically have a spindle running through the handle which regulates the locking mechanism within the window. They can be left- or righthanded. It is crucial to match the lock and handle correctly when replacing the handles.

Cockspur handles are typically fixed in the same manner as espagnolette handles but have different spindle lengths and can be either left or right-handed. Once you've identified the handle type and measured the spindle length, it's simple to replace a cockspur handle.

After you've screwed your new handle into the place, it's a good idea test it by turning it to turn off the lock. Then, replace the cap of the screw and make sure everything is working before covering it.

Website: https://www.repairmywindowsanddoors.co.uk/hillingdon-window-handle-replacement-near-me/