Notes

11 "Faux Pas" Which Are Actually OK To Make With Your Upvc Window Replacement Hinges
Choosing Upvc Window Replacement Hinges

It's not as difficult as it could seem to choose and fit the replacement hinges made of upvc. Check that the hinges' arrows face the right way and determine the thickness of the hinge arms on the opening frame (13mm or17mm).

There are several kinds of hinges to pick from, each with unique characteristics. This article will focus on the most commonly used types of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

They are a great option for replacing or upgrading windows for fire escapes because they can be opened at a 90-degree angle. They can be disengaged to an easy-clean position, allowing you to access the windows' exterior without having to climb ladders or lean at dangerous angles.

Yale is among the most trusted and well-known brands in the home security industry. These hinges are compatible with any kind of uPVC side hung window. They can be moved into the clean position by pressing in the small button and sliding the window sash to one side. When the sash is closed, it will be reset to its initial position.

They are available in both 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you determine the best product for your window.

These hinges are designed to work with a standard side-hung frame that is made of aluminium or uPVC. They are fitted with a simple friction screw to adjust the amount of resistance that is generated. This makes opening the window simpler and less likely of closing the window accidentally during high winds. They have been tested for more than 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.


The Nico Egress Easy Clean friction hinge is simple to use and does not have buttons or catch. It provides a convenient and secure solution to emergency exit and cleaning. Firstly, open the window to the egress (full opening) position, then press the hinge retaining clip located on the inside of the bottom corner. This will release both the catches on the top and bottom allowing you slide the sash to the clean position. Once you are in the clean position close the window to reset the hinges back to their original position.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace side opening windows to allow escape (fire safety) reasons. These kinds of hinges for windows open more wide and faster than normal hinges, allowing a large clear opening to escape in the event of an emergency fire. This type of hinge is required in any room that has a window, as required by building regulations.

They have an exclusive friction stopper that allows the window to be opened to an angle of 90 degrees. It allows the opening sash to slide across the glass when it is open to allow easy cleaning of the external side of the glass, without having to climb ladders. The hinges aren't flimsy buttons or catches and are operated by a simple, safe lever that can be accessed from inside the home.

The hinges are made in the UK by Cotswold and come complete with a child safety restraint for day to day use that can be overridden with a hidden button, providing you with peace of mind that your children will not accidentally open the door too far. They are available in 13mm and 17mm stack heights.

Find the length of the current side-hung window hinge that is attached to the frame. (See the guide for measuring the size of Upvc window hinges). Select the proper size hinge from the choices below.

Note that this measurement is taken from the hinge's part that is attached to the frame and not the sash. The actual hinge length may be shorter or longer dependent on how the old windows were manufactured. When choosing the size of your hinge, most upvc windows will fit 13mm stack height, however should your old window frame have 17mm then choose the option for this. You can also install the 4mm packer to make up the difference. All hinges come handed (1 left and 1 right). The hinges do not come with screws. If required, these can be purchased separately. Our window repair screws made of upvc are highly recommended. They are specifically designed to improve the performance of your hinges that allow them to run smoothly for a longer time. repairmywindowsanddoors feature a design with reduced friction and an enhanced weather seal with caps made of nylon.

Restricted Hinge

There are occasions when a window needs to fully open and this can be difficult using hinges that are standard. These child safety hinges can help overcome this problem and offer a fantastic solution for situations where ventilation is required but access to clean up or escape in the case of fire isn't possible. They restrict the amount of opening the sash and allow for the bypass of this restriction by pressing an appropriate button. They are available in 13mm or 17mm stack heights. They can be used to open top and side-hung windows.

The Nico Restricted Egress Friction hinge combines the advantages of a standard restrictor as well as an escape hinge to provide an efficient and simple method to meet building regulations. It is suitable for side hung and top opening uPVC windows and is available in 13mm and 17mm stack heights. It is available as a pair of hinges where one hinge is restricted egress and the second is unrestricted allowing one of these to be placed to the bottom of the sash whilst the other is fitted to the top.

These uPVC restricting hinges have been tested to BS6375 part 2 and are designed to be used on windows that isn't able to be fully opened, like a small children's bedroom. The mechanism restricts the amount the sash can open to a safety position of 100mm and re-engages when the window is closed.

These uPVC friction-type hinges can be used with any type of windows. They are particularly suitable for windows that are difficult to reach, like those in three-storey homes or ones that require the use of a ladder. They can be combined with our range of security enhancements like hinge guards, protection plates for hinges or dog bolts to provide PAS 24 performance.

When replacing a window hinge it is crucial to measure the length of the existing hinge so you can get replacements that are comparable in size. This can be done by looking through the image gallery of the hinge before deciding where you would like it to be. The top hung hinges can only be placed on one side, whereas the side-hung hinges can only be positioned on one side.

Standard Hinge

A standard hinge has metal-to-metal contact, and there are no additional parts to decrease friction. It's available in a range of finishes and is also fire-rated. To quickly determine the radius of a hinge, lay it out flat and align a quarter dime in two corners. If the dime is more snug and the corner is round by 1/4 inch; if the quarter fit better, it's rounded to 5/8 inch.

The proper hinge can enhance or ruin the appearance of your door. Achieving the same design and style of the hinges to your door will create an attractive and well-integrated look.

My Website: https://www.repairmywindowsanddoors.co.uk/lowestoft-window-hinge-repairs-near-me/