Notes

Find Out More About Replacing Upvc Window Handles While Working From The Comfort Of Your Home
Replacing Repair My Windows And Doors

Replacing window handles made of upvc is easy provided you follow the proper steps. Knowing the type of handle you have is crucial as is measuring the spindle to ensure that you buy the correct replacement.

The first step is to open the window to gain access. Then, remove any screw covers above or below the handle with an screwdriver with a flat head or butter knife.

Identifying the Handle

If your double glazed window handle has broken or become difficult to operate, it's probably the time to replace it. Replacing a upvc handle is a DIY project that can be completed quickly and affordably. The key is identifying your handle type and measuring the spindle length to ensure that your new handle will fit correctly. Here's how you can do it:

The majority of uPVC window frames utilize either cockspurs or espag handles. Both handle types have a mechanism that slots in the form of a square metal rod inside the frame of the window. The size of this rod determines the function of the window handle as well as whether or not it is able to lock. Try turning the handle loose or locking it to determine if it can open or close the window.

To replace a uPVC window handle, you must open the window to see the screws that hold it to the window frame. They are usually hidden beneath plastic screw covers that are easily removed with a flat-head screwdriver. Once the screws have been removed the handle will fall off easily.

Before you begin putting into your new handle, be sure that it's the same length as the previous one. You don't want to end up with an handle that is either too short or too long, as this can cause problems with the operation of your window and could lead to a premature breakage. To avoid this, you should determine the length of the handle from the base to the tip of the handle and make sure that the new handle is the same length. You can also buy a handle that has an extra spindle that is either shorter or longer than the one that is required by your window.

Identifying the Spindle

If you are replacing your window handles, it is important to be aware of the kind of handle your window comes with. This will help you locate the right replacement and ensure it will fit properly. It's easy to determine the handle type by taking a look at the handles. You should also consider if the window has a locking mechanism or not. This can affect the ease of opening and closing the window.

If the handle isn't tight or isn't turning, it's a clear sign that it needs to be replaced. This is especially relevant if the window does not open and close easily or is difficult to unlock. It is crucial to replace the handle before it's broken completely, as this can be dangerous for children as well as pets.

Find the spindle on the handle prior to purchasing new upvc handles. It's on the back of the base of the handle and it's crucial to get it right so that the new handle will fit properly. The spindle's cross-section must be 7 millimeters.

Once you have determined the length of the spindle, move the handle to the same place that it was in the past. Make sure it's in the open position, and then insert the spindle in the same hole that the previous one was. Install the new handle in the hole, and then screw the caps back on when necessary. Before wrapping up your tools, test the new window handle to ensure that it functions smoothly and closes the window properly. Use a silicone-based lubricant to ensure that the handle and all moving parts work smoothly.

Unscrewing the Old Handle

If your window handle is broken or loose, or is simply not working properly, there are clear indications that it's time to replace it. If it is difficult to open or close the window, this indicates that the handle doesn't work properly. If your lock doesn't turn to lock the window, this is another clear sign that it's time to replace the handle.

It is important to be patient and careful when changing the handle on your window. The window handles are heavy and can be thrown at you if you're not cautious. To remove the old handle, you'll have to remove it by removing both screws that cover the top and bottom of the handle. Once you've removed them, you can unscrew the handle and then remove it from the window.

When it comes to selecting a new handle, you are able to select from a variety of different sizes, types and finishes. But, it's essential to identify your handle type and measure the spindle length because this will determine the degree of compatibility a new handle will be.

The correct size and style will make it easy to operate and lock the window properly. This is because the handle is fitted with a particular slot that it fits into on the gearbox of the window. If you choose to use the wrong size, the window might stick or even break. The good news is that replacing the handle on your Everest uPVC windows is simple and only takes around five minutes to complete. This is a great method to enhance the appearance of your window and function.

Installing the new Handle

When it comes to replacing window handles made of upvc it is crucial that the correct size handle is installed. A handle that is not properly sized will not fit well against the frame and may experience excessive stress when being used, leading to premature breakage. This is particularly common when a window is opened and closed repeatedly and forcefully, since a badly fitting handle can easily suffer from a weak structural foundation.

The first step is to remove the screws that cover the cap caps that are situated between the handle and above it by using a thin, narrow tool (for example a butter knife). You will be able to see two screws that you will have to remove. Once the screws are removed and you are able to begin removing the handle from the window mechanism. The handle should remain in place to stop it from falling and injuring you.

When purchasing replacement windows made of upvc handles, it is important to measure the spindle length of the handle that was previously used. This can be measured either from the part of the handle that extends into the wooden frame, or from the length of the handle which protrudes from the back of the base of your handle. This information is essential to select a handle as different types of uPVC have different spindle sizes.


Espag handles, which are most commonly found on uPVC windows, have seven-millimetre spindles which activates the internal gearbox, which controls the multipoint locking mechanism for increased security. Cadenza handles are designed with an edging blade that fits into the lock mechanism. The fixing center can vary between 58mm to 62mm, based on the design. Cockspur handle has a long nose which locks over the shootbolts rods. Their fixing centres may also vary between 58mm to 43mm.

Test the Handle

When the window handle is replaced, it's important to make sure that the new one works correctly. This means making sure that the mechanism is turned on by turning the handle, and making sure that the window closes and locks properly. Anyone can replace window handles. All that's needed is the right tools, a little patience, and a basic knowledge.

The first step is to open the window to get access to the screws holding the handle in place. These are usually hidden beneath caps or screws made of plastic, which are easily removed with a screwdriver. After the screws have been removed, the handle should easily come away from the window frame.

Next, you'll need to identify the kind of handle that's mounted on your window and then measure the spindle's length. This will allow you to purchase the handle that is the same size as the existing one. Espagnolette handles usually come with a spindle that passes through the handle to control the locking mechanism inside the window. They can be right-handed or left-handed. It is crucial to ensure that the lock and handle are matched correctly when replacing them.

Cockspur handles can be left- or right-handed and are generally fixed the same as handles made of espagnolette. They have a variety of spindle sizes. After you've measured the spindle length and identified the handle, it's easy to replace a Cockspur handle.

After you've screwed the new handle into place, it's a good idea test it by turning it to turn off the lock. Then, replace the screw cap, and make sure everything is working before covering it.

Here's my website: https://www.repairmywindowsanddoors.co.uk/ipswich-window-handle-replacement-near-me/