Notes

10 Misconceptions Your Boss Has About Upvc Window Handle Replacement Upvc Window Handle Replacement
uPVC Window Handle Replacement

Over time, window handles may be damaged or worn out because of regular use and exposure to elements. In these cases, the best option is to replace the handle.

Upvc handles are available in a variety of styles and sizes. Older windows had cockspur handles which came in different step heights. Modern windows come with an espag handle with standard 43mm centres and two fixings. Examine the spindle of the handle you currently have to ensure that you're getting the proper size.

Removal of the old Handle

Window handles made of uPVC are designed to last for a long time, however, they may break due to age, heavy use, or exposure to the elements. Thankfully, replacing them is a simple and cost-effective option. Utilizing the correct tools and procedures will ensure that your new handle is installed properly.

Be sure to check that the handle you are buying is compatible with UPVC window features and design. Make sure that the screw holes and the spindle length match, and that the handle operates smoothly when you turn it to engage the lock mechanism. Test the handle by turning it around and ensure that it opens the window and closes it easily.

To replace a upvc window handle first, you must open the window to let in the frame. Find the screws that secure the handle to the frame, usually located above or below the handle. They are secured by caps or covers made of plastic. With a screwdriver that is flat, gently pry off the covers to reveal the screws beneath. Once you've removed the screws and removed the screws that secure the handle to the frame, and then the handle itself. Be careful when removing your handle to prevent it from falling and damaging the window.

Pay attention to the position of the spindle (the metal bar running through the middle of the window handle) when removing the handle that was previously in use. This will be important when you are installing the new handle.

You'll need to measure the spindle length of your UPVC handle typically written on the bottom of the handle or on its packaging. The spindle length is a measure of how far the handle's spinel noses out from the base and how much the spinel fits into the UPVC window. You can also measure another handle on the window to determine what length your new UPVC handles should be. The handle should ideally be similar to the previous one. Otherwise the handle won't fit properly and could break.

Take a measurement of the Spindle

It is important to choose the right replacements for your window handles whether they are broken or displaying signs of wear. This is because a wrong handle can affect the performance of the window and even increase the chance of breaking the glass. The key factor in finding the best double glazing window handles for your home is the length of the spindle. This is the length of the spindle that extends out from the base of the handle or the distance that the spinel extends into frame. You can determine the type of handle by taking the spindle measurement of another handle.

There are a variety of handles made from upvc, each with their own distinct characteristics. Some are able to tilt the window to open, while others feature a lock mechanism to prevent it from being open by burglars or children. Some feature a cranked design that gives a greater hand clearance, or could be installed inline, instead of being fixed to the frame of the window.

When you are choosing a new window handle, it is crucial to take into consideration the step height of your current windows. The step height will determine the type of handle that you must install. The typical step height of a uPVC window is 21mm. However, timber and aluminum windows have a lower step of 9mm.

Window Handle Lock Problems on a upvc window is a metal bar that runs through the middle of the handle and into the lock mechanism of the uPVC window. It is important to check the size of this spindle prior to purchasing a new handle, as a smaller diameter can cause the handle to not fitting properly. This can lead to the lock being damaged or not working, and the handle not being in a position to open the window.

It is essential to use a small object to measure the spindle. A pencil or a piece of paper is ideal. Then, you can compare it to the measurement of the new handle made of upvc to make sure it is the right fitting for the window you have.

Installing the New Handle

Depending on the type of handle, you'll need to replace it with one that is in keeping with your home's ironmongery and decor. You'll want to think about whether the handle you're replacing will work with your window, and how it'll be used.

If you are replacing a tilt-and turn handle, be sure to buy one that unlocks in either way. It is crucial to choose the right-hand or left-hand handle, as if incorrectly installed, it could cause issues when opening windows and impede airflow.

To remove the old handle, start by finding the fixing screws or pins which hold it in place. These are usually located on the inside of the window handle. They can be removed with pliers or a screwdriver. Once they're removed, the handle should come off with ease. If it doesn't, try to apply some force to remove it from the spindle, and then remove it completely from the window.

When you purchase replacement handles, make sure that they're the same height of step as your existing ones. The handle nose can be measured with the ruler or tape measure. The spindle measurement is also crucial. It can be accomplished using a ruler or tape measure. It refers to the distance between the handle spindle and the frame of the windows.

The standard backset for cockspurs and handles for epag is 43mm (2 fixings). You'll need the original size of the uPVC window to determine the appropriate replacement handles.


In general, uPVC handles can be either in-line or cranked. In-line uPVC handles are straight and will turn left or right, whereas the cranked handles are designed for an exact orientation. When choosing a new uPVC handle, take into consideration the window's orientation is and what your preferences are. If you like the look of a double glazing window handle in chrome or brass you can get the same style by purchasing handles that have the same appearance as the uPVC windows you already have.

Test the Handle

There are a wide range of handles that you can choose from for your uPVC windows, which is why it's crucial to choose the perfect one for your needs. Choosing the best handles will ensure that your windows are secure and easy to operate, making sure you get the most benefit of your double-glazing. It is crucial to select the handle that is in line with the style of your window and is compatible with the locking mechanism you have.

Espag Handles

The most popular uPVC handle type is the Espag handle. This handle comes with locks built in. This improves security and makes it difficult for burglars to break into the window. There are two kinds of Espag handles: inline and cranked. Inline Espagnolette handles have a rectangular flat shape. The spindle is inserted into the handle and is engaged by the locking mechanism that is located on the window frame. Similar to cranked handles, Espagnolette handles have a bent or curved design and function in a similar way as inline handles.

If the handle on your window breaks, you will need to replace it. There are many different replacement options available on the market, therefore it's crucial to choose a handle that's both suitable for your window and appropriate for the type of locking mechanism used in your house. It's also essential to select an item made of top-quality materials, since this will increase its longevity and resistance to the elements.

Check your windows regularly to make sure they are working properly and you are not losing heat or energy. Do not hesitate to call an expert if you think your uPVC window needs repair. They'll be able to advise you on the best solution for your home, and will provide an efficient, cost-effective and quick solution.

Switching the handle on your uPVC windows is a simple process that takes just about a couple of minutes. By identifying the type of handle and measuring the spindle, as well as using the correct tools and supplies it is possible to ensure that your window will be secure and comfortable.

Read More: https://www.repairmywindowsanddoors.co.uk/exeter-window-handle-replacement-near-me/