Notes

What You Should Be Focusing On Improving Upvc Window Replacement Hinges
Choosing Upvc Window Replacement Hinges

It's not as difficult as it may appear to select and install the replacement hinges made of upvc. It is essential to verify that the arrow on the hinges is facing in the correct direction and the thickness (13mm or 17mm) of the hinge arm on the opening frame.

There are a variety of different kinds of hinges, each with their distinct characteristics. This article will focus on the most common types of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

These are a great choice for replacing or upgrading your fire escape window since they open up to a full 90 degree angle. They can be closed to an easy-clean position, allowing you to access the outside of windows without the need to climb ladders or lean at risky angles.

Yale is one of the most trusted and well-known brands in the home security industry. These hinges can be used with any type of uPVC side-hung windows. They can be moved into the clean position by pressing an unassuming button, and then sliding the window sash to one side. When the window is closed, the sash will revert to its original position.

They are available in 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you choose the right product for your window.

These hinges are compatible with traditional side-hung frames made from uPVC, or aluminium. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the possibility of an accidental closure during severe winds. They have been cycle tested to over 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

There are Window Hinge Specialists haringey or catches The Nico Egress Easy Clean Friction Hinge is simple to operate and provides a convenient solution to emergency egress as well as safe cleaning. Firstly, open the window to the egress (full opening) position and then press the hinge retaining clip located on the inner side of the bottom corner. This will open both the catches on the top and bottom allowing you move the sash towards the easy-cleaning position. Close the window when you have the sash in an easy-cleaning position. This will reset the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges are often referred to as "Easy Clean" hinges are used to replace windows that open sideways for escape (fire safety) reasons. They allow for a larger opening in the event of fire. This kind of hinge is required in any living space that has windows, as stipulated by building regulations.

They have a unique friction stay that allows the window to open at a 90 degree angle and also allows the sash opening to slide across the glass when it is open to make it easy to clean the exterior side of the glass without needing to use ladders. The hinges have no fiddly buttons or catches, and are operated with an easy, secure lever that is accessible from inside the home.


The hinges are made in the UK by Cotswold and come complete with a child safety limiter for day-to-day use which can be turned off with a hidden button giving you peace of mind that your children will not accidentally open the door too far. They are available in 13mm or 17mm stack heights.

Measure the length of the current side-hung window hinge that is attached to the frame. (See the guide for measuring the length of upvc window hinges). Choose the right size hinge below.

Please note that this measurement is taken at the hinge's point that attaches to the frame, not the sash. The actual length of the hinge could be shorter or longer dependent on how the windows were made in the past. Also, when selecting the width of your hinge the majority of upvc windows can be fitted with a 13mm stack height but should your old frame have 17mm then choose the option for this. You can also utilize the 4mm packer to make up the difference. All the hinges are supplied with two hands (1 left and 1 right). Screws aren't included with the hinges. If required, these can be purchased separately. We recommend using our Upvc window hinge repair screws. These screws are designed to improve your hinges' performance and allow them to operate efficiently for a longer. They feature a less friction design and an improved weather seal with a new nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open a window fully. These child safety friction hinges are an excellent way to solve this problem. They can be used when ventilation is required, but cleaning or escape from an fire isn't possible. They function by limiting the amount the sash can open and allowing the to override this restriction by pressing the push of a button. They are available in 13mm or 17mm stack heights and can be used for both side and top hung windows.

The Nico Restricted Egress Friction Hinges combine the features of both a standard restrictor, and a pivot for fire escape to offer a simple and effective way to comply with building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 13mm and 17mm stack heights. It is supplied as a pair of hinges where one hinge is the restricted egress, the other unrestricted, allowing one hinge to be placed to the lower part of the sash, while the other is fitted to the top.

These uPVC hinges are designed to be used on windows that aren't able to be fully opened, such as the bedroom of a child. The mechanism restricts the amount the sash can open to a safety position of 100mm and re-engages when the window is closed.

These uPVC friction-type hinges can be used with all types of windows. They are particularly suitable for windows that are hard to reach, like those in three-storey apartments or those that require the use of a ladder. They can be upgraded by our security enhancements, such as hinge guards, or dog bolts, to achieve PAS 24 performance.

When replacing a window hinge, it is essential to determine the length of the current hinge to ensure that you get replacements that are comparable in size. This can be done by looking at the picture gallery of the hinge and then deciding where you would like it to be. Top-hung hinges are limited to both sides and side hung hinges can only be used to one side.

Standard Hinge

Standard hinges have metal-to-metal contacts and do not require additional parts to help reduce friction. It's available in a range of finishes and fire-rated. For a quick way to determine the radius of your hinge lay it flat and then line up a dime and quarter in two corners. If the quarter is more snug then the corner should be rounded to 5/8 inches.

The hinge you choose can enhance or ruin the appearance of your door. Matching the style and finish of the hinges to your door will give it an attractive and cohesive design.

Read More: https://www.repairmywindowsanddoors.co.uk/haringey-window-hinge-repairs-near-me/