Notes

5 Must-Know Practices For Replacing Upvc Window Handles In 2024
Replacing Upvc Window Handles

Replacing upvc window handles is easy when you follow the correct steps. It is crucial to identify your handle type and measure the spindle in order to find the appropriate replacement.

Open the window first to gain access. Next, remove any screw covers above or below the handle by using an screwdriver with a flat head or butter knife.

Identifying the Handle

It's time to replace your double-glazed window handle if it breaks or becomes difficult to operate. The good news is that replacing a window handle made from upvc is a DIY project that can be done quickly and cheaply. It is essential to identify the type of handle you have and then measure the spindle size in order to ensure that your replacement handle is a good fit. Here's how you can do it:

Most windows made of uPVC use the cockspur or espag handles. Both handle types have an mechanism that slots into an iron rod that is placed inside the frame of the window. The length of the rod determines the operation of the window handle as well as whether or not it is able to lock. To check the operation of the handle try unlocking or turning it loose it and then see whether you can open or close the window.

To replace a uPVC handle, you'll need to open the windows to see the screws that secure it to the frame. They are typically hidden under plastic screw covers that can be removed easily using the flat-head screwdriver. After the screws have been removed, the handle should come away easily.

Before you begin screwing in your new handle, be sure that it's the same length as the previous one. You don't want to be with a handle that is too short or too long, as this could cause issues with the operation of your window and lead to a premature breakage. To avoid this, measure the length of the spindle from the base of the handle up to the tip and ensure that your new handle is of the same length. You can also buy the handle with spindles that are longer or shorter than the one required by your window.

Identifying the Spindle

If you are replacing your window handles, it is important to be aware of the kind of handle your window comes with. This will help you choose the appropriate replacement and ensure it fits properly. It is easy to determine the handle type by looking at the handles. It's also a good idea to determine if the window is locked or not, since this could affect the ease of being able to open and close the window.

If the handle is slack or doesn't turn the way it should, then it's time for you to replace it. This is especially true cases where the window is difficult to close or open, or if it is difficult to unlock. It is essential to replace the handle as fast as possible, before it breaks completely. This could pose a risk for pets and children.

Before you purchase new window handles made of upvc be sure to measure the spindle length of the previous handle. It's on the back of the base of the handle and is crucial to do it right so that the new handle will be a perfect fit. The ideal spindle will have a cross-section of 7 mm.

Once you have determined the spindle's length Move the handle to the same position as the previous one. Make sure it's in an open position, and then place the spindle into the same hole that the old one was in. Install the new handle in position, and then place the caps back on when necessary. Before wrapping your tools, try the new window handle to ensure that it operates smoothly and closes the window properly. It's also an excellent idea to use a silicone-based lubricant on the handle and any moving parts to make sure everything is working as it should.

Unscrewing Old Handle

There are indications that your window handle requires to be replaced, whether it's broken loose, sagging, or functioning properly. For instance, if it's hard to open and close the window then this clearly indicates that the handle is not functioning properly. If the window lock isn't locking when you turn the lock, it is also a clear sign that the handle should be replaced.

It is important to be patient and cautious when changing the handle on your window. Window handles are heavy and could fall on you if not careful. To remove the old handle you'll need to unscrew it by removing both screws at the top and the bottom of the handle. Once these screws are removed, you can remove the screw and then remove the handle from the window.

When it comes to selecting a new handle you can select from a variety of different sizes, types and finishes. It is important to identify your handle type and also measure the length of the spindle because this will determine the degree of compatibility the new handle will be.

The correct size and design will make it simple to operate and secure the window. The handle fits in a slot on the gearbox of the window. If you choose to use a handle of the wrong size, the window may become stuck or even break. Switching the handle on Everest uPVC Windows is easy and takes only five minutes. This is a great option to upgrade your window's appearance and functionality.

Fitting the new Handle

When it comes to replacing window handles made of upvc, it is essential that the right size of handle is installed. A handle that isn't correctly sized will not fit well against the frame and may suffer excessive stress when used, leading to breaking prematurely. This is particularly true when windows must be shut and opened repeatedly.


The first step is to take off the cap screws which are located below and above the handle with a narrow, thin tool (for example a butter knife). You will then be able to see two screws you'll have to take off. After the screws have been removed, you are now able to begin removing the handle itself from the window mechanism. Be sure to keep hold of the handle to ensure it doesn't fall and harm you.

Before purchasing replacement upvc window handles, it is important to measure the spindle length of the handle that was previously used. This can be measured either from the part of the handle that extends into the frame of the wooden one or from the amount of the handle that extends from the back of the handle base. This information is required when selecting the right handle, as different types of uPVC handles have different spindle lengths.

Espag handles, which are typically found on uPVC windows, have a square 7mm spindle that triggers the internal gearbox, which controls the multipoint locking mechanism for increased security. Cadenza handles are made with a blade that slots in the lock mechanism. The fixing centre can vary between 58mm to 62mm, according to the design. Cockspur handles have an extended nose that locks over the shootbolt rods. They may also vary in their fixing centers between 58mm and 43mm.

Testing the Handle

When a window handle is replaced it is important to ensure that the new one functions properly. It is essential to ensure that the new handle operates properly. This involves turning the handle to activate the mechanism and ensuring that the window closes and locks correctly. Anyone can change upvc window handles. All you require is the proper tools, some patience, and a little knowledge.

The first step is opening the window to gain access to the screws holding the handle in place. These are usually hidden beneath plastic screw covers or caps that are easily removed with a screwdriver. After the screws have been removed, the handle will easily fall off of the window frame.

Next, you'll need to identify the kind of handle that's mounted on your window and then measure the length of its spindle. This will allow you to buy an handle that is the same size as your current one. Espagnolette handles usually have a spindle running through the handle which controls the locking mechanism inside the window. These can be either left or right-handed, and it is essential to match the hand of the handle and lock when replacing it.

billericay Window Handle Replacement are generally fixed in the same way as espagnolette handles however they have different spindle lengths, and can be left or right-handed. Once you've identified the handle type and measured the spindle, it's easy to change the cockspur handle.

After you've screwed your new handle in place it's a good idea test it by turning it to activate the lock. Then, you can replace the cap of the screw and check that everything works before covering it.

Website: https://www.repairmywindowsanddoors.co.uk/billericay-window-handle-replacement-near-me/