Notes

Upvc Window Replacement Hinges Explained In Fewer Than 140 Characters
Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window replacement hinges isn't as complicated as you may think. Make sure the arrows on the hinges face in the correct direction, and then measure the thickness of the hinge arms on the frame opening (13mm or17mm).

There are bridgwater uPVC Window Hinge Repairs of hinges to choose from, each one with distinctive characteristics. This article will focus on the most popular types of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

These are a great choice to replace or upgrade your fire escape window as they open to a full 90-degree angle. They can be closed to a 'easy-clean' position, allowing you to access the windows' exterior without the need to climb ladders or lean at dangerous angles.

These egress hinges are heavy-duty and are made by Yale which is among the most well-known and respected home security brands available today. These hinges can be used with any type of uPVC side hung window. By pressing a small button, the window sash will be moved to the side, and then into the clean position. Once closed, the window sash will return to its original position.

Both 13mm and 17mm sizes are available. Based on the size of your existing window, we recommend using our Egress Selection Guide to determine which product is best for you.

These hinges can be fitted to standard side-hung frames made of aluminium or uPVC. The friction screw is used to adjust the resistance. This allows for easier opening of the window and reduces the chance of a mishap during high winds. They have been tested for over 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

There are no buttons or catches the Nico Egress Easy Clean Friction Hinge is simple to operate and provides a convenient solution for emergency egress and safe cleaning. First, open the window to the egress (full opening) position, and then press the hinge retaining clip located on the inside of the bottom corner. This will release the top and bottom catches which will allow you to move the sash into an easy-clean position. Close the window when you have the sash in an easy-cleaning position. This will set the hinges back to their exit positions.

Fire-Escape Hinge

Fire Escape Hinges (also called "Easy Clean") are used to replace windows that open sideways to ensure fire safety. These kinds of hinges for windows open more wide and faster than conventional hinges to provide a large clear opening to escape in the event of an incident of fire. This type of hinge is legal in any habitable room that has a window, according to building regulations.

The windows have a friction stay that allows them to open at 90 degrees. They also let the opening sash slide across the glass when it is opened which allows for easy cleaning without having to climb ladders. The hinges do not have buttons or catches, and are operated by an easy, secure lever that can be accessed from the inside of your home.


The hinges, which are manufactured in the UK by Cotswold, come with the safety of children in everyday use. It can be reverted by a hidden button. You will have peace of mind knowing that your children won't open the doors too far. The stack heights are 13mm or 17mm.

To purchase these hinges, take a measurement of the length of your current side hung window hinge that fixes to the frame (see the guide on measuring your upvc window hinges). Select the proper size hinge from the selections below.

Be aware that the measurement is taken from the part that is fixed to the frame not the sash, the actual hinge length may be shorter or larger based on the manufacture of your old windows. When deciding the width of the hinge most upvc frames will fit with a height of 13mm however if your original window frame is 17mm, then select this option. Alternatively you can fit the 4mm packer to make up the difference. All hinges come in two different directions (1 left and one right). Screws are not included with the hinges. These can be bought separately if needed. We suggest using our upvc window hinge repair screws. These are specially designed to enhance the performance of your hinges and allow them to function smoothly for longer. They have a reduced friction design and a better weather seal with a new nylon reducer end cap.

Restricted Hinge

Standard hinges can make it difficult to open a window completely. The restricted child safety friction hinges are a solution to this issue and offer a fantastic solution when ventilation is required but access for cleaning or escape in the event of fire isn't possible. They work by restricting the amount that the sash can open and allow the override of this restriction with the push of a button. They are suitable for both side- and top-hung windows and come in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinges combine the benefits of the standard restrictor, as well as a fire escape pivot to offer a simple and efficient method of complying with building regulations. It is available in 13mm or 17mm stack heights and is suitable for both top and side opening uPVC window. It is available as a pair of hinges where one hinge is restricted egress and the other unrestricted allowing one of these to be placed at the lower part of the sash, while the other is attached to the top.

These uPVC hinges are restrictive and have been tested to BS6375 Part 2. They are intended for use on a window that isn't able to be fully opened, like a small children's bedroom. The mechanism restricts the distance the sash can open to an appropriate height of 100mm and then re-engages when the window is shut.

These uPVC friction-style hinges can be used on all kinds of windows. They are especially useful for windows that are difficult to reach, like those in three-storey houses or those which would require ladders. These can be enhanced with our security enhancements, such as hinge guards, or dog bolts, to achieve PAS 24 performance.

When replacing a window hinge, it is essential to measure the length of the current hinge to ensure that you order replacements that match in size. This can be done by looking at the picture gallery of the hinge before deciding where you would like it to be. Top-hung hinges are limited to both sides and side-hung hinges are only restricted to one side.

Standard Hinge

Standard hinges use metal-to-metal connections and do not require extra parts to reduce friction. It's available in a variety of finishes and is also fire rated. To quickly determine the radius of a hinge, lay it out flat and align a quarter dime in two corners. If the dime fits better than the quarter, the corner is rounded by 1/4 inch; if the quarter fit better, it's rounded to 5/8 inch.

The right hinge can be the difference between making or breaking your door's appearance. It's important to match the finish and style of your door with the hinges to create a seamless appearance that is both practical and visually attractive.

Homepage: https://www.repairmywindowsanddoors.co.uk/bridgwater-window-hinge-repairs-near-me/