Notes

"The Window Handles Awards: The Most Sexiest, Worst, And Weirdest Things We've Seen
Upvc Window Handles Replacement

It is fairly easy to replace your window handle. You'll require a few tools and a few steps. To ensure an efficient replacement, you should first determine the type of handle and measure the spindle.

There are two kinds of handles made of upvc: Cockspur and Espag handles. Espag handles have a seven millimetre square spindles which engages the locking mechanism on the frame.

Espag handles

Espag handles are one of the most popular kinds of window handles that are available for windows made of upvc and some timber frames too. They are designed to work with locking systems that use espagnolette. They have a 7mm square spindle which extends from the handle's back and then locates inside the gearbox of a multipoint lock system inside the window. They are available in a variety of sizes of spindles. This is due to the fact that each kind of window handle is usually fixed to a different multipoint locking system that has an entirely different layout and positioning of the gearbox.

The most common specifications for espag windows handles include a button for the closed position that is locked as well as key-locking and non-locking fire escapes (where is required). Some even reach Secure by Design standards, which will provide you with security. Typically, they are affixed to the sash using two screws that are 43mm apart.

There are Window Handle Replacement bishops stortford Repair My Windows And Doors of variations of the handle for espag. The most notable is the in-line or cranked model. Those that are in-line will turn both left and right, while those that are cranked are only operable in the direction of the window's motion (i.e. They can be installed either clockwise or counter-clockwise. The handles can be fixed to the window in any direction however they must be pointed in the same general direction as the old cockspur handles.

The most important thing to remember when choosing a replacement upvc window handle is to take the time to measure the spindle length. The spindle is a metal bar that extends from the back of the handle. It can be any length from 10mm to 55mm. It is the length that is visible when the handle is together in its intact state. You will need to match this when purchasing a new handle as the spindle is what controls the lock within the window.


Certain manufacturers offer a magnetic espag handles that eliminate the requirement to cut spindles in order to fit. This can simplify the fitting process because it is quicker and easier to take out a replacement and insert another. However, you should take the time to measure the spindle in order to make sure that the handle operate smoothly.

Cockspur handles

Cockspur handles are used on older uPVC and aluminium windows. they don't come with an internal locking mechanism, however they are considered safe because the handle's nose locks onto a wedge shaped block which is fitted into the window frame (this kind of handle should not be confused with timber windows where there is an opening instead). Cockspur handles are still popular and come in different styles to fit all kinds of doors.

They are an economical and easy option. They can also be key-locked to comply with insurance requirements. There's also a selection of handle nose heights that fit different frames. A lockable version, which provides the security factor and has been approved by Secured by Design, is also available.

These handle types are affixed to the sash on the tilt-and-turn or casement side of the window with a spindle that passes through the baseplate. The handle is operated by the lever that is located on either side of the handle. the handle spindle is then engaged with the striker wedge that is fitted to the window frame to lock it into place. Cockspur handle kit are available in left and right hand models. There are also a variety of nose heights that fit the majority of frames.

The right size wedge block is essential to an efficient installation. This is simply a small block of plastic that is shaped as ramps and you can replace the existing one with one of a slightly larger size to ensure that the handle will close precisely across the gap of the window to prevent drafts. There is a standardization of fixing positions for these handles. They typically have 38mm and 58mm in size, so you will be able to locate the right replacement without too much difficulty.

Another thing to consider when choosing the new set of cockspur handles is the spindle length. This is the distance from the baseplate of the handle up to the point where the shaft of the handle extends through the sash and into the frame and it is crucial that this measurement is accurate to ensure the handles operate smoothly.

Tilt and Turn Handles

These handles are designed specifically for tilt-and-turn windows. They come in nonlocking, locking, or tilt safe options. They are heavyweight operating handles that have a strong grip and have detents at 90 degree angles. Available in a variety of finishes such as black, white and gold. It is compatible with Timber or PVCu tilt-and-turn windows.

These handles can be used to replace the cockspur handle on older windows that aren't equipped with locks. These handles aren't exactly the same as espag Upvc handles, as they're not locked and function in a different manner.

The 'turn before tilting' mechanism allows the window to tilt to the side, and then be dropped into a ventilation position or hopper-style position to breathe fresh air. This kind of handle also referred to as DK or dry keep window handle, is commonly used in older double glazed properties.

There are many things to consider when you are replacing a tilt and turn window handle. First, you must make sure that the new handle is suitable for your windows, this includes checking the spindle's length. The spindle is a rod made of metal that extends from the handle and into the locking mechanism. The longer the spindle is, the more security it will provide.

The handle itself is usually attached to the frame or the base of your window using a screw that is located above or below it, depending on the design of the window. You can use a screwdriver remove these screws and then remove the handle. It is best to open the handle first, making it easier to access both screw holes.

After removing the handle you will find two screws that must be removed. These decorative screws will then be revealed. These can be unscrewed with a flat-head screwdriver and then the handles can be removed. Once the handles have been repositioned on your windows, you can put them back in place by replacing the cap on the screw.

Take a measurement of the length of the spindle.

The spindle of a window handle decides the manner in which it will open and shut. It's important to measure your old handle and compare it to the spindle length of a new one. This will ensure that the new handle will fit into the window in the right way, and will be easy to open and close.

Whether you want to replace your handles or enhance the appearance of your uPVC window, the handle style will have a significant effect on the way the window opens and locks. There are numerous types of handles, including inline espagnolette, cranked, and key locking. There are tilt-turn handles specifically designed to work with a tilt-turn uPVC window that can open both ways.

To replace a window handle first, locate the screw caps that secure it. These are usually located above or below the window handle and can be removed using the screwdriver. After the screws have been removed, you can remove the handle and spindle from the window frame.

You can then remove the handle from the frame of the window and replace it with a brand new one. Make certain that the new handle is put in the same place as the previous handle and that the spindle aligns perfectly with the lock mechanism. Once the new handle has been installed, it's the time to fix the handle by reinstalling the screws. If you have screws that are missing you can replace them.

It may be necessary to change the handles on your uPVC window when they break. The handle can break due to a strong force or because the female part in which the spindle is placed has deteriorated. This could be caused by someone in your household forcing the handle to lock.

If you are looking to replace your handle made of uPVC, you should pick a top-quality one that will last a long time. You'll save money in the end. Additionally, it will give your house a an appealing and modern appearance.

Website: https://www.repairmywindowsanddoors.co.uk/bishops-stortford-window-handle-replacement-near-me/