Notes

Seven Reasons To Explain Why Dual Fuel Range Cooker With 13amp Plug Is Important
Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who loves the responsiveness of gas cooktops, but still requires an oven to bake in? Discover a dual-fuel range cooktop that gives you the best of both worlds.

Gas cooktops are the preferred choice of many home chefs who have years of experience in the kitchen because of their superior temperature control. They also allow them to use advanced cooking techniques like charring. These powerful stoves can be costly particularly if they need an additional gas connection as well as an electrician for installation.

What is a 13amp plug?

If you have a dual fuel range cooker (also called an electric and gas oven) is required, you'll need a suitably rated 13 amp plug. The plug must be wired by a certified electrician to the cooker ring.

This ensures the current flowing through the plug will not exceed the limit of safety, which could lead to an electrical fire. The plug has an electric fuse that regulates the current. The fuse will blow when it is overloaded. This protects the appliance against an overload of electricity.

The fuse is classified at 13 amps, as shown on the top of the plug and this indicates the maximum current that the plug can carry without causing harm to the appliance or overheating the socket. When replacing fuses, it is essential to use the same amp rating that was used in the original. If you replace the fuse using one with the different ratings, you risk overheating the socket and putting yourself and others in high risk.

A 13 amp fuse is likely to be a type of ceramic that is extremely durable and can withstand the high temperatures produced by a range cooker. Ceramic is also fire-proof, making it a better choice over other types of fuse.

There are a few different ways that a 13 amp plug could be connected. It may be wired to an existing live socket, and the flex then connected to it using an screw or a plastic jaw-type cord clamp. The clamp on the cord should be tightened after the plug is tightly pushed into place.

Some plugs may include a wiring diagram on cardboard over the pins, and these must be removed prior to connecting the wires. It is crucial that the wires are trimmed to the correct length as leaving them too long can cause them to be crushed when the plug cover is replaced. The earth wire must be the longest one to ensure that it is connected before the line and neutral pins.

How do I install the 13amp plug?

The vast majority of dual fuel range cookers in the UK are wired to a 13 amp plug socket and this is very important as ovens can draw a significant amount of current, and standard plug sockets are only designed to handle 10 amps.

In general new appliances must be fitted with a plug at the point-of-sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug installed and this is the reason for the problem.

When connecting the cooker to an existing plug socket, the first step is to check that the rating of the fuse in the box matches the plug's rating. This is very important as an incorrectly sized fuse could be dangerous.

It is also important to check that the fuse is fully set in the cartridge and there isn't any excessive movement within it. Next up is to prepare the flex that is to be used. First remove the sheathing from the flex to expose the three insulated conductors within. Use a utility blade to cut the sheathing just beyond the grip of the cord at the entry point of the plug. This will not be able to penetrate the insulated conductors. This nick should be wide enough that the sheathing can split and expand the nick when it is pulled back to reveal the cable beneath. Cut off the excess sheathing leaving about 40mm beyond the flex.

The flex is placed over the plug with the earth terminal on the top and the live and neutral terminals at the bottom. Using the conductors with the colors to guide you, the sheathing is then removed from each pin, and the internal cable is fixed to the appropriate terminal by using the cord grip. If the plug has an attached cord clamp that is screw-type, loosen it and then pull the insulation back to reveal the copper wires. Connect each of the conductors insulated to the appropriate terminal (starting with the earth before neutral, and then the live) using the channel that they run through in the plug.

What is the maximum draw of a 13 amp plug?

The maximum current draw of an 13amp plug is 3kw at 230volts. This is a significant amount of power, however the standard fuse in the UK plugtop won't fail until the cable is at a risky temperature. A defective plug or socket could cause fire, therefore it is important to be aware of the amount of power you use particularly in the kitchen.

The ceramic fuses used in plugtops measure around 25mm and are rated for mains voltage of 240V. They will feature a BS kitemark or similar marking on the side and contain sand. Plastic or glass alternatives are available, but they should not be used in conjunction with a live plug.

In the UK, most dual fuel range cookers are hard-wired. They are not able to plug directly into a wall outlet. They are usually connected via a dedicated cooker circuit, which is only suitable for appliances using up to 20 amps.

You can verify the ring circuit of your home by looking at the fuse box, or by speaking to an electrician nearby. They will be able tell you if the sockets in your home are connected to the same ring or are separate and whether there is a dedicated circuit for your oven.

If you're in the market for a new dual-fuel range cooker the size of your kitchen is a crucial aspect to take into consideration. Luckily, we have a large range of cookers that will fit any space, including compact 50 - 60cm dual fuel models and vast 90cm + double oven models from the top brands such as Rangemaster and StovesAreUs.

If you're after something a little more unusual, don't worry - we also have a great collection of electric and gas multi-functional cookers. These versatile machines let you cook a variety meals such as pasta, casseroles and curries!


Currys offers a wide range of Cookers. Browse our online collection or visit us in our store to see them. We provide free home installation and delivery on certain range cookers, as well as flexible payments options. If you have any queries or concerns, our staff are ready to assist you - just drop us an email or give us a phone call. Credit is subjected to status, and terms & condition apply.

What is the maximum current draw of a cooker switch?

There is lots of confusion regarding what the maximum current draw of a cooker's switch is. The fact is, most cookers aren't made to plug into a standard socket, but instead are wired hard and fed into a dedicated oven ring circuit. It is because they often consume more than 20 amps when the electric and gas hob oven are being used.

Therefore, you cannot find a dual range cooker with a fuel source that can be connected to a standard socket, as this would present a very significant fire risk and be against electrical safety regulations. A licensed electrician will install any new electrical wiring to a cooker in the kitchen and will make sure that the total load (both the hob and oven) will not exceed the power capacity of that circuit.

Dual fuel range cookers mix the ability to cook with the sensitivity of a gas stove and the precision and precision of an electric oven. This is the reason they are highly sought-after by cooks and chefs alike. Dual cookers with fuel ranges are ideal to experiment with different cooking techniques, including searing or charring.

When you are looking to purchase an appliance for your kitchen, you'll have to consider various aspects like size, performance and cost. In addition, you will be required to ensure that your home is equipped with a suitable gas hook-up for the appliance. If you're unsure you're not sure, it's recommended to get a Gas Safe engineer inspect your property prior to installation.

The Currys range of dual fuel range cookers includes options that can be adapted to a range of budgets, from affordable models from Indesit and Zanussi to our own exclusive Essentials collection. If you are looking for something more advanced We have a range of premium JennAir models, which feature several new features.

If you are buying a brand new dual fuel range cooker, it's important to check the owner's manual for specific information regarding the gas and electrical requirements. You will require an electric connection to your home. A plumber might be required to install it for you. Based on the type of home you live in you'll also need to make sure that you have a dedicated cooker ring circuit that is installed and endorsed by a licensed electrician.

Read More: https://www.saludcapital.gov.co/sitios/VigilanciaSaludPublica/Lists/Contactenos/DispForm.aspx?ID=756292