Notes

11 "Faux Pas" That Are Actually Acceptable To Make With Your Ghost Immobiliser Fitting
Ghost Immobiliser Fitting

Secure your vehicle from key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be linked to the immobiliser to send you notifications when your vehicle is stolen or tampered with.

The installation of the Ghost immobiliser can be completed by a trained technician. Having the right tools, insulation tape, and heat shrink tubing is essential.

Getting Started

Ghost immobilisers are a great alternative to physical theft protection devices such as wheel locks and car alarms. They guard your vehicle without using LED indicators or key fobs. They are directly connected to the ECU CAN data network and can only be activated after entering a PIN. This gives a greater level of security against key hacking, ECU swapping and cloning.

As a result, installing a ghost immobiliser Birmingham has to be done with a high degree of agility and accuracy. It's like walking through a minefield. A mistake could result in serious damage to the circuits of your vehicle. It is crucial to know the procedure for installing and prepare your vehicle correctly.

You'll need to take out interior panels from the vehicle in order to make room for the immobiliser. Once you have found the perfect place to hide it and you have it, use cable tie to fix it. Then, tidy your wiring by connecting loose wires and using insulation tape to cover any exposed connections. This reduces the chance of a short circuit that is not intended to happen, while improving the aesthetics and reducing the chances of theft.

Find a source of constant 12V power, and an earthing point for the ghost immobiliser. Once you have found them check the power cables with a multimeter. Connect the CAN H and the CAN L wires from the immobiliser to the power source and grounding points.

It's important that you double-check all the connections and check the immobiliser to check for indications of corrosion. By entering a PIN and then starting the vehicle is a great method to test the system. This should be a regular part of your routine, as it will allow you to detect any issues that are intermittent early. Regular testing will help to extend the life of your device, and keep it functioning at its peak.

Preparing your vehicle

Installing a Ghost immobiliser requires expertise and tools. A wiring diagram of the vehicle is vital to identify the proper wires and making accurate connections. A multimeter can help verify the electrical value and ensure security. Cable tie and insulation tape can be used to secure the connections and protect them from being tampered with. Additionally, a user's manual will provide specific guidance tailored to the Ghost Immobiliser model you have.

Once installed, a ghost immobiliser is able to stop unauthorised engine starts by requiring the driver to input a unique PIN code sequence through existing buttons in the steering wheel or on the centre console. The code can be changed at any time by the vehicle owner by hand or remotely through an app on mobile. The device also functions quietly and is undetectable to thieves because it does not emit radio frequencies.

Ghost immobilisers are directly connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs, and blocks the engine if a false signal is identified. The system is weatherproof and tamperproof. It has no keys or LED indicators that could attract thieves' attention.

It can be mounted behind or in a less visible area so that it's not visible to thieves, and does not interfere with vehicle performance. It can be placed in a small container so that it is less likely to be noticed by fraudulent salespeople when they test drive.

Its stealthy operation, combined with its integration into the vehicle's CAN-bus system can be an effective deterrent to car theft methods such as signal relay attacks and key cloning. Combining the system with other security measures will create a powerful barrier that can deter even the most persistent thieves. This is why more insurance companies are suggesting or even requiring ghost immobilisers be installed, since it will significantly lower the cost of insurance.

Making the Connections

Ghost immobilisers are quiet, unlike traditional security systems which can be heard by thieves. They stop thieves from knowing that your car is running. They also prevent high-tech methods of stealing vehicles like OBD hacking. They can also be put in without causing permanent damage to your car making them a good choice for people who plan to sell their vehicle in the near future.

The Autowatch Ghost 2 CANbus immobiliser is among the newest and most reliable methods to stop car theft. It shuts down your engine by using the CAN data network and generates a unique PIN code, which is difficult for criminals to guess. It can be used in various vehicles and is compatible with a variety of existing features, including car alarms, GPS trackers and steering wheel locks and door bypass systems for locks.

If you decide to go with an Ghost immobiliser, make sure to check the wiring diagram of your specific vehicle model to identify the wires that require connecting. Check their locations to make sure they are exact, and label them or tape them to help you remember them. You'll also need to locate a source of constant power (12V) and a grounding point for the system. Once you have these in place, you can begin to connect the components to complete the installation.

The ghost immobiliser won't allow your vehicle to start unless you enter a pin code through the buttons on the steering wheel or dashboard. This will stop ECU hacking, key cloning, and other methods of theft. It can also be paired with other Thatcham approved security equipment such as alarms and tyre clips to give your car an even higher level of protection.

As the UK automotive aftermarket industry grows and expand, so do the options for securing your vehicle. With so many options for thieves to break in and steal your vehicle it's essential to do all you can to protect it from being stolen. That's why ghost immobilisers have become an extremely popular option for responsible car owners.

Testing the System

The Ghost Immobiliser communicates with the vehicle's ECU via the CAN network. This stops the engine from starting until a PIN code has been entered. This makes it extremely difficult for thieves to copy your key fob and start your vehicle, and more difficult to disable the system through hacking into its electronics.

Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help locate your vehicle in the event that it's stolen. This feature is not a common option for security products that are available from the market however it's an excellent method to enhance your security and give you assurance that your vehicle is always secure.


In addition to offering enhanced security and security, in addition to providing enhanced security, the Ghost-II immobiliser also provides a comfortable user experience by eliminating the need for additional key fobs and devices. It features a simple, easy PIN code entry system that works seamlessly with your daily routine. It also offers convenience features and deactivation options that allow you temporarily disable the immobiliser so that you can park or service your vehicle.

Before you begin the installation process, you should familiarize yourself with the vehicle's wiring and prepare the tools. A basic set of hand tools will allow you the flexibility to make precise connections, and a multimeter is a great tool to determine electrical values. Insulation tape and heat-shrink tubing are essential to protect connections from short circuits. Cable ties can be used to secure wiring. It is also essential to work in a place that is well-lit and wear safety gear when using electrical components and tools.

After what is a ghost immobiliser 've completed the installation you should test the Ghost immobiliser to verify that it's working as intended. The first step is to start the vehicle without entering the PIN code. If this fails then you'll have to test again and examine the connections more thoroughly.

Contrary to other security devices, unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is much more effective than traditional deterrents like wheel clamps or steering locks. It is TASSA acknowledged and approved by some insurance companies, making it an investment that's cost-effective and will give you the peace of mind that you need.

Website: https://yamcode.com/