Notes

How To Install Ghost Immobiliser: A Simple Definition
How to Install a Ghost Immobiliser

Ghost immobilisers protect your vehicle from key cloning or hacking. It prevents the engine of your vehicle from starting until it is activated using a PIN code, which can be up to 20 characters in length.

It is not detected by thieves, who are unlikely to think about this additional layer of security. Certain systems come with an app which allows the owner to disarm their immobiliser if they forget their PIN code or to use the service/valet mode.

Connecting the vehicle's CAN Bus

The Ghost 2 Immobiliser, a cutting edge security system, can be integrated directly into the ECU of your vehicle. It offers a discrete barrier against thieves. It is extremely efficient and user-friendly and can be a valuable option to add to your vehicle's security arsenal. Like all anti-theft devices, it's not foolproof, and requires regular maintenance in order to function effectively. Fortunately, this guide will help you get the most out of the Ghost 2 Immobiliser.

CAN (Controller Area Network) is a reliable serial networking, allows microcontrollers communicate with each other over small distances. Central control units is not required. It is designed for multiplexing electrical wiring within vehicles to cut down on copper and offers a range of advantages, such as low cost and easy use.

The CAN protocol is used in most modern automobiles to connect with the engine management system, transmission controller, steering control module and air conditioning controls and more. It also carries sensor information like speed sensors and other inputs, to regulate the car's various features. The CAN bus is used to monitor these different components, and it can stop the car from starting if they are in a dangerous state.

It's important to know how the CAN bus functions and how it's secured. Using CAN bus can be a great way to enhance the features of your vehicle, but it's vital to protect it from hackers and other threats. Installing a firewall and monitoring your CAN-bus with software is the best way to achieve this.

Ghost2's discreet control unit is concealed in the car's wiring harness or dashboard, which eliminates the possibility of a criminal physically altering it. It is also impossible to reset a PIN code or an emergency code without having access to the car.

You can turn on Transport Mode if you need to surrender your vehicle for service, valet parking or any other reason. This feature turns off both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only be activated after the car has reached 31 mph over a period of 15 minutes.

Making PIN codes


The Ghost immobiliser is a powerful security system that protects your vehicle from thieves. The latest technology utilizes an PIN code to disable the engine and stop it from running without the proper code or an authorized fob or mobile device. The system's sleek design makes it unnoticeable, and offers unrivaled security against theft. The system is TASSA-certified and can save you significant amounts on your car insurance.

During installation when you install the Ghost system goes into the learning mode to record the sequence of buttons pressed to create your unique pin code. The installer will guide you through activating the system once the pin code is created. Once activated by the system, the Ghost system will turn off the motor that starts your vehicle until a valid PIN has been entered or the vehicle is switched to transport mode. This makes it extremely difficult for thieves to duplicate or hack into your vehicle's start system.

Installing a Ghost immobiliser is straightforward, but it is important to follow the detailed instructions in the user's manual to ensure that it operates properly. Basic hand tools can assist in making precise connections and a multimeter can aid in checking the electrical value. Insulation tape as well as heat shrink tubing and cable ties are a good option to shield wires from damage. Check the system on a regularly to spot any issues that could be.

Once the installation is complete it is crucial to conduct a final test of the system prior to turning on the ignition in your vehicle. Ghost immobilisers will re-arm themselves after 3 to 30 second depending on the model of your vehicle. The system also comes with a Service/Valet Mode which lets you temporarily disable the system to service or valet parking.

webpage should be hidden in a hidden location beneath the dashboard or steering wheel. It is recommended to use a small bit of paint or duct tape to mark the CAN H and L wires so that you can easily identify them during testing. Additionally, the CAN H and CAN L wires must be connected to a source of power that has continuous 12V. It is also important to check the connections again after testing, as a mistake in identifying these wires could cause the system to malfunction.

Activating the system

A ghost immobiliser blocks your car from starting until you press certain buttons inside the vehicle, typically on the steering wheel or door panel, or the central console. The sequence is set by the user and is able to be changed if necessary. Once activated, the system cannot be turned off. This is a fantastic option for anyone who wants to secure their vehicle from theft.

The system is designed to be undetectable. This means it can't be detected by modern diagnostic tools or code-grabbing technology. It does not emit radio frequencies, making it even more difficult for thieves detect.

If the device is discovered it will stop the engine from running. It will also sound an alarm to scare the thief away. The device can be used to track the location of the vehicle, which can help police locate it in the event of theft.

Contact Car Specalist Customs for a quote or to discuss your options in a Ghost immobiliser. We are certified to install ghost immobilisers in your vehicle. We will ensure that it is placed in a location that is hard to reach. We also offer other security measures such as the wheel lock and kill switch to help protect your vehicle from thieves.

Disarming the System

If you have a Ghost immobiliser fitted to your vehicle, it's essential to know how to disarm it. You can use this in the event that you lose your keys or your battery dies. The system utilizes a unique PIN code that only you know, which means the immobiliser will not start your vehicle without entering this code. Pressing the combination buttons on the steering wheel or on the dashboard is the most efficient method to enter your code. This is much simpler than using a key fob, and prevents others from copying the remote.

Ghost2 isn't intrusive, unlike some aftermarket immobilisers that require cutting wires for installation. It also connects to the CAN bus system of your vehicle to operate. Its standout characteristic is its ability to bypass the engine without affecting the normal functions, making it hard for thieves to use signal boosters to duplicate your car key. Furthermore, it doesn't emit radio frequencies, meaning thieves aren't able to detect the system.

The Ghost system has a Transport Mode which allows you to temporarily disable security for certain situations such as service or transportation. This feature is ideal for when you're loaning your vehicle to someone else without sharing your PIN code or if your vehicle requires to be kept secure even while you drive it. To activate the Transport Mode you need to press the service button five times in a matter of 2 seconds. The Ghost system will confirm activation with five indication signals.

When you're done, remember to save the emergency code in a safe place away from your vehicle. If you ever find yourself locked out of your vehicle you can contact the company or technician who installed the system and they'll give you the code. If you cannot reach them You can always attempt to contact an authorized dealer however this will require verification procedures and could result in additional charges.

In addition to the convenience of this system, you can depend on it to safeguard your vehicle from theft and cut down on insurance costs. Many insurance companies offer reduced premiums or financial incentives to install this system to prevent theft.

Website: https://dokuwiki.stream/wiki/20_Fun_Informational_Facts_About_Ghost_2_Immobiliser