Notes

This Is How Dual Fuel Range Cooker With 13amp Plug Will Look Like In 10 Years' Time
Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who appreciates the convenience of gas cooktops but requires an oven for baking? Discover a dual-fuel range cooktop that offers the best of both worlds.

Gas cooktops are favored by many home chefs with years of experience in the kitchen due to their superior temperature control. They also allow the use of advanced cooking techniques like charcoaling. These stoves are costly though, especially in the event that you require an additional gas hook-up as well as an electrician to install it.

What is a 13amp plug?

If you have a dual-fuel range cooker (also called a gas and an electric oven) you'll require an electrical outlet of 13 amps. The plug must also be hard-wired by a licensed electrician into the cooker ring.

This assures that the current that flows through the plug is secure and not excessive, which could create an electrical fire risk. The plug is equipped with an electrical fuse that regulates the current. The fuse will blow when it is overloaded. This safeguards the appliance from overloads of electricity.

The fuse is classified at 13 amps, as shown on the top of the plug and it indicates the maximum current that the plug can pass without causing damage to the appliance or overheating the socket. When replacing fuses, it is crucial to select the same amperage rating as the original. If you replace the fuse using one with the different ratings, you are at risk of overheating the socket, and potentially putting yourself and others in high risk.

A 13 amp fuse is likely to be a ceramic type, which is very robust and able to withstand the high temperatures generated by a range cooker. Ceramic is also fire-resistant, which makes it a more suitable option than other types of fuse.

There are a few different ways that a 13 amp plug could be fitted. It may be wired to an existing live socket, and the flex is connected to it using a screw or plastic jaw type cord clamp. The clamp on the cord should be tightened after the plug has been tightly pushed into place.

Some plugs may have a diagram of wiring on cardboard over the pins and these should be removed before connecting the wires. It is vital that the wires be cut to the right length, as cutting them too long could cause them to be crushed when the plug cover is replaced. The earth wire must be the longest one to ensure that it is connected prior to the line and neutral pins.

How do I connect an outlet with 13amps?

The vast majority of dual fuel range cookers in the UK are wired to 13 amp plug sockets and this is vital since ovens draw a significant amount of current and standard plug sockets are capable of 10 amps.

Generally speaking new appliances should be fitted with a plug at the point of sale and this is part of ensuring compliance with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug and this is the problem.

When connecting the cooker to an existing plug socket the first thing to do is to ensure that the rating of the fuse in the box matches the plug's rating. This is vital because an incorrectly-sized fuse can be dangerous.

It is also recommended to check that the fuse has been fully seated in the cartridge, and there isn't any excessive movement. Next up is to prepare the flex to be used. First remove the sheathing from the flex, exposing the three insulated conductors within. Then, cut the sheathing near the point of entry to the plug (beyond the cord grip) using a utility knife, but without damaging the individual insulated conductors. The nick should be wide enough that the sheathing can split and enlarge the nick as it is pulled back to reveal the cable beneath. Finally, cut off the excess sheathing and leave about 40mm over the flexing end.

The flex should be positioned over the plug with the earth terminal on top and the neutral and live terminals at the bottom. Using the coloured conductors to guide you and the sheathing is removed from each pin, and the internal cable is then plugged into the appropriate terminal using the cord grip. If the plug has an screw-type clamp for cords, loosen this and then pull back the insulation to expose the copper conductors. Finally, connect each insulated conductor to the appropriate terminal (starting with the earth, then neutral and finally the live) by using the channel they are running through the plug.

What is the maximum draw of a 13 amp plug?

The maximum current draw of the 13amp plug is 3kw at 230volts. This is a lot of power, but the standard fuse in the UK plug won't fail until the cable reaches a dangerous temperature. A defective plug or socket could cause a fire therefore it is important to be aware of how much you are using particularly in the kitchen.

The fuses in plugtops are ceramic, approximately 25mm long and 240V mains rated. The fuses are marked with the BS Kitemark or a similar mark on the side, and they'll contain sand. Alternatives to glass or plastic are available, but should not be used in conjunction with a live plug.

The majority of dual fuel range cookers in the UK require hard-wired and are not able to plug directly into a wall socket. They are usually connected via a dedicated cooker circuit, which is only suitable for appliances using up to 20 amps.

Check the ring circuit of your home by using the fuse box, or call an electrician in your area. They should be able to tell you if the sockets in your home are on the same ring or separate and if there is a separate circuit for your oven.

The size of your kitchen will be a major factor when you decide to buy a dual fuel range cooker. We have a wide range of cookers that will fit any space. Pick from compact 50-60cm dual fuel models or vast 90cm+ double oven options from top brands like Rangemaster and StovesAreUs.

If you're looking for something a little more unusual do not worry - we also offer a fantastic collection of electric and gas multi-function cookers. These multi-functional appliances let you cook a variety meals such as curries, pasta, and casseroles!

Currys offers a variety of Cookers. Explore our online collection or visit us in store to see them. We offer free home installation and delivery on a selection of range cookers and flexible payment options. Our team is on hand to answer any questions you have. You can contact us via email or phone. Credit is subject to status and terms and conditions apply.

What is the maximum current draw of a cooker switch?

There is lots of confusion regarding what the maximum current draw of a cooker switch actually is. The truth is that most cookers aren't made to connect to a standard socket, but rather are hard wired and fed into an oven ring circuit. This is due to the fact that they usually consume more than 20 amps when the electric hob and gas oven are in use.

Therefore, you will not find a dual range cooker with a fuel source that can be fitted to a standard socket as it could pose a dangerous fire hazard and is against electrical regulations. A professional electrician will always install any new electrical wiring to the kitchen cooker and ensure that the total load (both the hob and oven) does not exceed the supply capability of that circuit.

Dual fuel range cookers combine the ability to cook with the sensitivity of a gas stove and the precision and precision of an electric oven. This is why they're well-liked by cooks and chefs alike. Dual fuel range cookers are perfect for experimenting with various cooking techniques, including searing or charcoaling.

When you are looking to purchase a new range cooker you will need to consider several factors like size, function and cost. In addition, you will also need to make sure that your house has the right gas hook-up for the appliance. If you're unsure then it's advisable to have an Gas Safe engineer inspect your property prior to installation.


Currys dual fuel range cooker s come with a variety of models that will fit all budgets. From budget-friendly models from Indesit and Zanussi to our own Essentials collection. If you are looking for something more advanced, we stock a variety of premium JennAir models, which feature several unique features.

If you are buying a brand new dual fuel range cooker, it's essential to read the owner's manual for specific details on the electrical and gas requirements. It is essential to ensure that your house has a gas hook-up suitable, and you may need to get a plumber to install it for you if necessary. You may also need a dedicated cooker-ring circuit, installed by an experienced electrical engineer.

My Website: https://canvas.instructure.com/eportfolios/3398853/home/a-guide-to-commercial-dual-fuel-range-cookers-from-beginning-to-end