Notes

Ten Ghost Immobiliser Install Myths That Don't Always Hold
Autowatch Ghost Immobiliser Installation

The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's discrete, doesn't employ key fobs or LED indicators and is hidden within the wiring of the vehicle.

It also allows the user to disable the system temporarily through Transport Mode in the event of renting their vehicle. This guide will walk you through the process of installing a Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system connects directly to your vehicle's ECU and is protected by a unique PIN code of your choice. It is not detected by thieves using diagnostic scanners and other advanced methods. It cannot be disabled by cutting circuits.

The system is simple to use, however professional installation is advised to ensure a perfect connection to the ECU of your vehicle. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking device or alarm to complement your vehicle's security package.

First, the installer must disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After the battery has been disconnected, the installer may start working safely. Hand tools are essential for securing connections with precision and a multimeter may be used to test the electrical properties and safety. Insulation tape and cable tie are vital to secure connections and keep wiring tidy. The Ghost Immobiliser user manual will give specific instructions that are specifically tailored to your specific model.

During the installation process, it's essential to choose a grounding point that's free of paint and debris. The installer must also make sure the immobiliser's H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. Depending on the model, these wires might need to be soldered or plugged in. To ensure a stable and durable connection, it is recommended that you use a high-quality plug.

Transport Mode can be turned on by the client after the installation is completed. This allows valet parking or mechanics to access the vehicle without having to know the pin code. The customer has to press the icon for service on the dashboard five times within two seconds. The system will confirm this by showing 5 indicators.

The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a smart option for anyone who regularly rents out their vehicles on platforms such as Turo. An immobiliser can cut down on insurance costs, since it decreases the likelihood of theft.

Getting Started

If you're looking for a solution to secure your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. The device protects your vehicle from being started even when a criminal steals or copies the key. It's possible because of its advanced technology that prevents the engine from starting until the correct PIN code is entered.

The device is connected to the vehicle's bus network CAN, allowing direct communication with the ECU. It uses existing buttons on the dashboard and wheel to create a unique sequence that only you can identify and makes it impossible for anyone else to start your vehicle. This is the ultimate system to protect your pride and joy. It will keep its value intact in the event that you decide to sell it.

Installing a Ghost immobiliser is easy however, you must follow the steps to avoid electrical issues and malfunctions in the system. You'll need to locate a 12V power supply and a solid grounding on the car's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques for an effective connection. Insulate the connections using heat shrink tubing or insulation tape, as well as other materials to prevent short circuits in electrical power.

After the wires are connected, you can connect the battery and start the engine to test whether the immobiliser works. When everything is functioning correctly then you can put it in a secure location under the dash or somewhere else in the vehicle. Be sure to hide it well so that a thief cannot alter it.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it meets the highest standards of security and is an excellent deterrent to car thieves. It provides superior protection against key cloning, hacking, and relay attacks. It isn't able to be disabled unless you know the code. It is also simple to use and can be put into a service valet mode so that your car isn't activated if you take it in for service or an MOT.

Wiring

The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. Contrary to other aftermarket systems which require the removal of circuit components The Ghost Immobiliser does not interfere with the factory settings of your vehicle.

It's also completely undetectable to thieves using diagnostic scanning devices. The system doesn't send or receive radio frequency signals and instead uses CAN data to communication with your ECU. It doesn't require any modifications to your existing key fobs.

Enter your sequence for disarming (either two or one buttons) and then switch on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. Once you've verified this, you're able to start your car and drive away in peace.

Once installed, the Ghost Immobiliser will safeguard your vehicle from hacking and key cloning and will also protect the value of your car's pride and joy. In Transport Mode you can temporarily disable the Ghost Immobiliser if you have to hand your car over for service or valet park.


To complete a Ghost Immobiliser installation, you'll need locate a source of constant power (12V) and a grounding point. Ensure that these are both well-insulated and safe to touch. Cable ties are also recommended for bundling and securing the wires. This reduces the possibility of theft by thieves. Make sure you check the exact position of these points to avoid mistakes, and mark them with an adhesive or label. Examine all connections for signs they are wearing out. Make sure that all connections are firmly in place, and properly insulated. Finally, don't forget to test the Ghost Immobiliser after the installation is completed. This will make sure that the unit functions properly, and that all connections are secure and insulated. If there are any issues, be sure to resolve them immediately.

Testing

The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that seamlessly into your vehicle's ECU to block unauthorised engine start. Its cutting-edge technology safeguards your vehicle from key cloning and hacking and other common tactics that thieves employ to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unparalleled features, paired with its subtle design, make it a popular option for both car enthusiasts and security conscious drivers.

It is important to follow the steps of installation in order to ensure complete integration of the Ghost Immobiliser. Consult the wiring diagram for the vehicle as it will aid you in locating and connecting the wires. You'll need to determine the power and grounding sources. Once you've identified these you'll need to mark them so that they're easy to identify when installing. It is also essential to use high-quality tools and materials. Hand tools are a must with making precise connections while a multimeter can verify electrical values and ensure safety. Cable tie and insulation tape ensure that all connections are neat. A Ghost-specific user's manual is also available.

It is essential to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This step will confirm the immobiliser functions as intended and stop unauthorised vehicle starts. This procedure should be carried out frequently as part of your regular vehicle inspections in order to ensure the system is always functioning properly.

After the installation has been completed, you can start driving your car with confidence. The Ghost will guard your pride and joy from potential car thieves. It will ensure that no one can take your car away if they do not have the correct PIN code. The Ghost can be paired with an approved Thatcham tracker that identifies any attempts to steal or tamper with. This allows you to locate your car if it's stolen.

The Ghost can be utilized in a variety of vehicles and is compatible with the majority of major brands. If you're interested in protecting your car with this cutting-edge device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards for installing our products. ghost immobiliser 2 guarantees customers insurance companies, customers, and law enforcement agencies that installations are done safely and correctly.

Here's my website: https://notes.io/w94PV