Notes

Why We Our Love For How To Install Ghost Immobiliser (And You Should Also!)
How to Install a Ghost Immobiliser

Ghost immobilisers are hidden security system that shields your vehicle from key cloning and hacking. It works by preventing the engine of your vehicle from starting until it is started with a PIN code that can be as long as 20 characters.

This extra layer of protection is not visible to thieves who are unlikely to be aware of it. Some systems also have an application that allows owners to disarm the immobiliser in case they forget their PIN code or to switch to the service/valet mode.

Connecting the vehicle's CAN Bus to the vehicle's

The Ghost 2 Immobiliser is an advanced security system that is able to be integrated into your vehicle's ECU and provides a discrete security line against thieves. It is highly effective and user-friendly, making it a valuable option to add to your vehicle's security arsenal. Like all anti-theft devices, it's not foolproof, and requires regular maintenance in order to function properly. Luckily, this guide will aid you in getting the most value from your Ghost 2 Immobiliser.

CAN (Controller Area Network), a robust serial networking that allows microcontrollers to communicate with each other over small distances. A central control unit is not required. ghost ii immobiliser is designed to multiplex electrical wiring in vehicles, which saves on copper. It offers many advantages, such as the low cost and ease of use.

In the majority of modern cars In modern cars, the CAN protocol is used to connect with a variety of systems, including the engine management system (EMS), steering module, transmission controller, air conditioning controls and many more. It also carries sensor data, such as speed sensors and inputs to control different features of the vehicle. The CAN bus is used to monitor these various components, and prevent the car from starting if they're in danger of failure.

It is important to understand how the CAN bus works and how it's secured. The CAN bus is an excellent way to enhance the features of your vehicle, but it's essential to secure it from threats like hackers and other hacker. The best way to accomplish this is to install a firewall and monitoring your CAN bus with software.

Ghost2's secluded control unit is hidden away inside the car's wiring harness or dashboard, eliminating the possibility of a burglar physically tampering with it. It is impossible to reset a PIN code or an emergency code without having access to the vehicle.

You can activate Transport Mode when you have to sell your car for valet parking, service or any other reason. This feature will disable both the keyfob and the ignition functions of the Ghost immobiliser. It will only reactivate after the vehicle has travelled 31 mph over a period of 15 minutes.

The process of creating a PIN code

The Ghost immobiliser guards your vehicle from theft. The cutting-edge technology uses the PIN code to disable the engine and prevent it from starting without the correct code or a valid fob or mobile device. Its discreet design ensures that the system is inconspicuous and offers unbeatable protection against theft. Furthermore, the system is TASSA verified and can result in significant savings on insurance premiums for cars.

During the installation during installation, the Ghost system enters a learning mode to record the sequence of buttons that are pressed to create your unique pin code. The installer will guide you through activating the system once the pin code has been created. Once activated it will Ghost system will turn off the motor that starts your vehicle until a valid PIN has been entered or the vehicle is switched into transport mode. This makes it very difficult for thieves or cloners to hack or replicate your starter system.

Installing an Ghost immobiliser is simple, but it is important to follow the precise instructions in the user manual to ensure proper operation. Multimeters and basic hand tools are a good way to check electrical values. Insulation tape, heat shrink tubing, and cable ties can be used to shield exposed wiring. Test the system on a regularly basis to detect any potential issues.

After the installation is completed, it is important to perform a final check of the system prior to turning on the ignition in your vehicle. Ghost immobilisers are able to rearm themselves after 3 to 30 seconds, depending on the model of your car. The system also comes with the option of a Service/Valet mode, which allows you to temporarily disable the system while servicing your vehicle or valet parking.

Ideally, the immobiliser should be hidden beneath the dashboard or on the steering wheel. It is recommended to use a small piece of duct tape or paint to mark the CAN H and L wires to ensure that you easily locate the wires during testing. In addition the CAN H and L wires must be connected to a source of power that provides continuous 12V. It is also crucial to re-check the connections after testing, as misidentifying these wires could cause the system to fail.

Activating the system

A ghost immobiliser prevents your car from starting unless you press a series of buttons inside the vehicle typically the steering wheel, door panel or central console. The sequence is decided by the user and can be altered as needed. Once activated, the system will not be deactivated. This makes it an ideal choice for anyone looking to protect their vehicle against theft.

The device is not designed to be detected by modern diagnostic and code-grabbing techniques. It doesn't emit radio frequencies making it even more difficult for thieves identify.


If the device is discovered, it will stop the engine from starting. It will also sound an alarm to scare the burglar away. The device can be used to track the location of a car which can aid in the search for the vehicle in the event that it was stolen.

If you are looking for a ghost immobiliser call the experts at Car Specalist Customs to get a quote and discuss your options. We are qualified to install ghost immobilisers for your vehicle. We will ensure that it is placed in a place that is hard to reach. We can also install other security measures, including a kill switch or wheel lock to ensure your vehicle is secure from theft.

Disarming the System

If you have a Ghost immobiliser fitted to your vehicle, it's essential to know how you can disable it. This will help you in the event that you lock your keys in the car or your battery goes out of. The system utilizes a unique PIN code that only you know, which means the immobiliser will not be able to start your vehicle without entering this code. The easiest way to enter the code is to press a combination of buttons on your dashboard or steering wheel. This is a far simpler method than using the key fob and it also keeps anyone from copying your remote.

Contrary to other aftermarket immobilisers which require cutting wires to install, Ghost2 is non-invasive and integrates with your vehicle's CAN bus network to function. Its standout feature is its ability bypass the engine without affecting the normal functions, making it difficult for thieves to make use of signal boosters or copy your car keys. Furthermore, it doesn't emit radio frequencies, which means thieves aren't able to detect the system.

The Ghost system also has a Transport Mode, which allows you to temporarily disable the security system in occasions like transportation or servicing. This feature is ideal for when you're loaning your vehicle out to someone else, without sharing your PIN code or if your vehicle requires to be protected when you drive it. To activate the Transport Mode, press the service button 5 times within a period of 2 seconds. The Ghost system will confirm activation with 5 indication signals.

Save the emergency code outside your vehicle in a safe place. If you ever get locked out of your vehicle You can call the technician or the company that installed the system and they'll provide you with the code. If you're unable to contact them, you can call an authorized dealer. However, this might require verification procedures, and you could be charged additional fees.

This system is not just practical, but it can also help protect your vehicle from theft, and also reduce insurance costs. Many insurance companies offer lower costs or financial incentives for those who install this anti-theft system.

My Website: https://www.thekeylab.co.uk/car-security-ghost-immobiliser/