Notes

Dual Fuel Range Cooker With 13amp Plug's History History Of Dual Fuel Range Cooker With 13amp Plug
Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who enjoys the responsiveness of gas cooktops, but needs an oven to bake in? Discover a dual-fuel range cooktop that gives you the best of both worlds.

Gas cooktops are preferred by many home chefs who have experience in the kitchen due to their superior temperature control. They also allow the use of advanced cooking techniques, such as charring. These cooktops can be costly though, especially in the event that you require an additional gas connection and electrician for installation.

What is a 13amp outlet?

If you own dual fuel range cooker (also known as a gas and electric oven) then you'll require an appropriately rated 13 amp plug. The plug must be wired by a licensed electrician into the cooker ring.

This ensures that the current passing through the plug is safe and not too high which could result in an electrical fire risk. The plug has an electric fuse that regulates the current. The fuse blows when the current passes through it beyond its capacity, which safeguards the appliance from overload of electricity.

The fuse is rated at 13 amps as shown on the top of the plug and it indicates the maximum current that the plug can pass without causing damage to the appliance or overheating the socket. It is essential that when replacing fuses you always use the same amps as the original. You risk overheating a socket when you replace a fuse that has an unrelated rating.


A 13 amp fuse is likely to be a ceramic type, which is very robust and able to withstand the extreme temperatures generated by the range cooker. Ceramic elements are also resistant to fire and therefore a better choice than other types.

There are a variety of ways to install a 13 amp plug. It may be wired to an existing live socket, and the flex is connected to it using a screw or plastic jaw type cord clamp. The clamp on the cord should be tightened after the plug is tightly pushed into place.

Before connecting the wires, you may need to remove the cardboard wiring diagram that is placed over the pins of certain plugs. The wires must be trimmed to the right length, because if they are too long they could be crushed when the plug covers are replaced. The earth wire should be the longest to ensure that it is connected prior to the neutral and line pins.

How do I install a 13amp plug?

The vast majority of dual cookers that use fuel in the UK are wired with an amp rating of 13 amps. This is crucial because ovens draw a significant current, and standard plug sockets only have a 10-amp rating.

Generally speaking new appliances should be fitted with a plug at the point of sale and this is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug connected and this is the reason for the problem.

When connecting a cooker to an existing plug socket the first step is to ensure that the rating of the fuse inside the fuse box is in line with the plug's rating. This is vital because an incorrectly-sized fuse can be dangerous.

It is also important to check that the fuse is fully set in the cartridge and there isn't any movement within it. Next up is to prepare the flex to be used. Remove the sheathing to expose the three conductors that are insulated. Utilize a utility knife to cut the sheathing beyond the grip on the cord at the entry point of the plug. This won't be able to penetrate the insulated conductors. The nick should be wide enough to allow for the cable and sheathing to separate when the sheathing is pulled back. Finally, cut off the excess sheathing leaving approximately 40mm of length that extends beyond the flexing end.

This flex should be placed over the plug, with the earth terminal on top and the live and neutral terminals on the bottom. Using the coloured conductors to guide you and the sheathing is removed from each pin, and the internal cable is inserted to the appropriate terminal by using the cord grip. If the plug is fitted with a screw-type cord clamp loosen it and pull back the insulation to expose the copper conductors. Connect each insulated wire to the appropriate terminal by using the plug's channel. Begin with the earth conductor and then the neutral and then the live.

What is the maximum draw of a 13amp plug?

The maximum current draw for a 13amp plug at 3kw at 230 volts is. This is a significant amount of power, but the standard fuse on the UK plug will not fail until the cable reaches a dangerous temperature. It is essential to be aware of the amount of power you are using in your kitchen, since a defective plug or socket could cause a fire.

The ceramic fuses used in plugtops measure around 25mm and are rated for 240V mains. The fuses will bear an BS Kitemark or a similar mark on the side, and they will contain sand. Plastic or glass alternatives are available, but should never be used in conjunction with a live plug.

In the UK the majority of dual fuel range cookers are hard-wired. dual fuel mini range cooker are not able to plug directly into a wall outlet. They are usually connected to a specific cooker ring circuit which is only suitable for appliances that consume up to 20 amps.

You can check the ring circuit in your home by examining the fuse box or by asking a local electrician. Ask them if the sockets are connected to the same ring or if they are distinct. They should also be able tell you if there's an individual circuit that powers your oven.

If you're considering buying a brand new dual fuel range cooker, the size of your kitchen is a crucial factor to take into account. We offer a broad selection of cookers that can fit any space. Pick from small 50-60cm dual-fuel models or huge 90cm+ double ovens from top brands like Rangemaster and StovesAreUs.

If you're looking for something different Don't worry, we also have a wide selection of electric and gas multifunction cookers. These multi-functional appliances let you cook a variety of meals including pasta, casseroles and curries!

Currys offers a broad selection of Cookers. Explore our online collection or stop by our store to see the range. We offer free delivery and installation at home on selected range cookers, and we also offer flexible payment options. Our team is on hand to answer any questions you have. You can contact us by email or telephone. Credit is subject to the status of the account, and terms and condition apply.

What is the maximum current draw of a cooker switch?

There is a lot confusion about the maximum current draw of the cooker switch. Most cookers are hard-wired and connected to a dedicated oven-ring circuit and not a standard socket. This is because they will often draw more than 20 amps of power each time the gas hob and electric oven are in use.

Therefore, you will not find a dual fuel range cooker that can be fitted to a standard socket, as this would present a very significant fire risk and be against electrical regulations. An experienced electrician will install any new electrical components to a cooker in the kitchen and will make sure that the load (both the oven and the hob) does not exceed the power capacity of that circuit.

The benefits of a dual fuel range cooker include the responsive heating of a gas cooktop and the precise operation of an electric oven. This is why they are highly sought-after by chefs and home cooks alike. Dual fuel range cookers are perfect for experimenting with various cooking techniques, such as searing or charring.

When buying a new cooktop, you must be aware of a number of aspects such as size, function and price. In addition, you will also need to make sure that your home is equipped with a suitable gas hook-up for the appliance. If you're not sure, it is best to book an appointment with a Gas Safe engineer to inspect your home prior to installation.

The Currys range of dual fuel range cookers has options that can be adapted to a range of budgets, ranging from low-cost models from Indesit and Zanussi to our exclusive Essentials collection. If you are looking for something more sophisticated We have a range of top JennAir models, that come with several unique features.

It is crucial to read the instruction manual for the owner before purchasing a dual fuel range cooker. It will provide you with specific information about the electrical and gas requirements. It is essential to ensure that your home has a suitable gas hook-up and you may have to get a plumber to install it for you if necessary. Depending on your home you'll also have to ensure that you have a dedicated cooker ring circuit in place and signed off by a licensed electrician.

Read More: https://www.ovensandhobs.uk/categories/dual-fuel-range-cookers/3