Notes

Why Dual Fuel Range Cooker With 13amp Plug Is A Must At The Very Least Once In Your Lifetime
Dual Fuel Range Cooker With 13amp Plug

Are you a home chef who loves the responsive cooking control of gas cooktops but needs an electric oven to bake? Find a dual-fuel range cooker that gives you the best of both worlds.

Many home chefs with experience prefer gas cooktops for their superior temperature control and ability to utilize sophisticated cooking techniques, such as grilling. These powerful stoves are costly particularly if they require an additional gas connection and an electrician to install them.

What is a 13amp outlet?

If you have a dual fuel range cooker (also known as a gas cooker and electric oven) you'll require an outlet with 13 amps. The plug should also be hard-wired by a certified electrician to the cooker ring.

This ensures that the current flowing through the plug does not exceed the safe limit, which could lead to an electrical fire. The current is controlled by a fuse in the plug. The fuse will blow when it is overloaded. This protects the appliance from overloads of electricity.

The fuse is rated at 13 amps, as shown on top of the plug. This indicates the maximum amount of current the plug could pass without damaging the appliance or causing heat to the socket. It is important that when replacing fuses, you always use the same rated amperage as the original. There is a risk of overheating a socket when you replace a fuse that has a different rating.

A 13 amp fuse is likely to be a ceramic one, which is very robust and able to withstand the extreme temperatures generated by a range cooker. Ceramic is also fire-resistant, which makes it a more suitable choice than other types of fuse.

There are many ways to install a 13 amp plug. The plug can be connected to a live socket with screws or a plastic jaw cord clamp. The plug should be placed in a secure position and tightened, ensuring that the clamp is secure.

Before connecting the wires you may have to remove the cardboard wiring diagram which is placed over the pins of some plugs. It is essential that the wires are cut to the correct length as leaving them too long can cause them to be crushed when the plug cover is replaced. The earth wire must be the longest in order to connect it before the neutral and line pins.

How do I install the 13amp plug?

The majority of dual fuel range cookers sold in UK are equipped with a 13 amp plug. This is vital because ovens can draw substantial current, while the standard plug sockets have a rating of 10 amps.

In general new appliances must be fitted with a plug at the point-of-sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances may not be connected to the plug, and this is the reason why the problem occurs.

The first thing to consider when connecting a cooker with an existing plug socket is to make sure that the fuse rating in the fuse box is in line with the rating of the plug. This is very important as an incorrectly sized fuse could pose a risk.

dual fuel range cookers ireland Ovens & Hobs is also recommended to make sure that the fuse is fully seated in the cartridge and there isn't any excessive movement within it. The next step is to prepare the flex to be used. First remove the sheathing from the flex, exposing the three conductors insulated within. Then, cut the sheathing near the point of entry to the plug (beyond the cord grip) with a utility knife, without piercing the individual conductors that are insulated. The nick should be large enough to allow the sheathing and cable to separate when the sheathing is pulled back. Cut off the excess sheathing, leaving around 40mm beyond the flex.


This flex should be placed over the plug with the earth terminal on top and the neutral and live terminals at the bottom. The sheathing around each pin is removed using conductors in the colour of the wire as a guide. The internal cable is then inserted into the terminal with the help of the cord grip. If the plug has a cord clamp that is screw-type, unwind it and then pull the insulation back to expose the copper wires. Connect each wire that is insulated to the appropriate terminal by using the plug's channel. Start with the earth conductor, then the neutral, and finally the live.

What is the maximum draw of a 13 amp plug?

The maximum current draw for 13amp plugs at 300 volts is 3kw. This is a lot of power but the standard fuse that comes with the UK plugtop won't fail until the cable reaches a hazardous temperature. A faulty plug or socket can cause a fire so it's important to keep an eye on how much you are using, especially in the kitchen.

The fuse inside the plugtops are made of ceramic, around 25mm long and rated 240V mains. The fuses will have an BS Kitemark or a similar mark on their side, and they'll contain sand. There are glass or plastic alternatives, but they should never be used with a live plug or else you could blow up the fuse and possibly be electrocuted!

The majority of dual fuel range cookers sold in the UK require a hard-wired connection and will not plug directly into a wall socket. They are typically connected through a dedicated cooker circuit, which is suitable only for appliances with a maximum of 20 amps.

You can test the ring circuit at your home by checking the fuse box or asking an electrician in your area. Ask them if the sockets are on the same ring, or if they are distinct. They should also be able to inform you if there's a dedicated circuit to power your oven.

The size of your kitchen is one of the main factors when you're looking to buy a dual-fuel range cooker. We offer a variety of cookers that can be adapted to any space. Choose from small 50-60cm dual-fuel models or vast 90cm+ double ovens by leading brands such as Rangemaster and StovesAreUs.

If you're after something different, don't worry - we also offer a fantastic collection of electric and gas multi-function cookers. These multifunction cookers let you cook a variety meals, including casseroles, pasta, and curries.

Explore our complete range of Cookers in Currys on our website or visit us in store for a look. We offer free delivery and home installation on selected range cookers, and we also offer flexible payment options. If you have any queries or concerns, our staff are ready to assist you by sending us an email or give us a call. Credit is subject to status and terms and conditions apply.

What is the maximum current draw of the cooker switch?

There is lots of confusion regarding what the maximum current draw of a cooker switch is. The majority of cookers are hard-wired and connected to a specific oven-ring circuit not the standard socket. It is because they often consume more than 20 amps when both the electric hob and gas oven are in use.

Therefore, you cannot find a dual fuel range cooker that can be fitted to a standard socket, as this would present a very dangerous fire hazard and is in violation of electrical regulations. A professional electrician will always install any new electrics to the kitchen cooker, and they will ensure that the total load (both the hob and oven) will not exceed the supply capability of the circuit.

The advantages of a dual-fuel range cooker are the receptive heat of a gas cooktop with the precision of an electric oven. They are therefore popular with both home cooks and chefs. If you are looking to experiment with different cooking techniques, such as searing and grilling, a dual-fuel range cooker is the ideal choice.

When purchasing a new range cooktop, you need to take into consideration a variety of factors that include size, performance, and price. In addition, you will be required to ensure that your home is equipped with the right gas hook-up for the appliance. If you are unsure you are not sure, book a Gas Safe engineer to inspect your home prior to installation.

The Currys range of dual fuel range cookers offers options that can be adapted to a range of budgets, from basic models from Indesit and Zanussi to our exclusive Essentials collection. If you're looking for something bit more sophisticated, we also stock a wide selection of premium JennAir models, with several unique features.

If you are buying a brand new dual fuel range cooker, it's essential to read the owner's manual for specific details on the electrical and gas requirements. You must ensure that your house has a suitable gas hook-up and you may have to have a plumber install this for you, if needed. You may also need an individual cooker-ring circuit installed by an experienced electrical engineer.

Read More: https://www.ovensandhobs.uk/categories/dual-fuel-range-cookers