Notes

10 Best Mobile Apps For Ghost Immobiliser Install
How to Do a Ghost Immobiliser Install

The Ghost immobiliser is an advanced anti-theft system. It works in silence, utilizing radio frequencies and uses the CAN data network to prevent your car from being taken.

It is essential to know the functions of the device before starting an installation. You can make it through the installation process with ease and increase the capabilities of the device after installation if you've got an in-depth understanding of.

Identifying the Wires

A ghost immobiliser, which is a modern security system designed to safeguard your vehicle from theft. It uses advanced technology to stop your car from starting until you enter a specific pin sequence. Installed discreetly in your car, the device can reduce the cost of insurance. It's perfect for drivers of expensive or high-performance cars who want to protect their prized possessions from theft.

The system is connected to the engine controller unit using CAN. This makes it difficult for thieves to disable the immobiliser or remove it. It also does not send out radio frequencies and operates silently. The immobiliser can be altered with, and it does not require keys or LED indicators to function. It can be used to prevent your vehicle from being stolen, even the keys are cloned.

It's important to be prepared in the event that you'll need to remove the ghost immobiliser at some point in the future. To do this, you'll need to familiarise yourself with the wiring system inside your vehicle. Wear protective gloves and ensure that you are working in an area with good ventilation. Utilizing strippers or wire cutters, take care to disconnect the wires from the immobiliser. Label each wire so you can identify the connection when needed.

You should be aware that getting rid of the Ghost Immobiliser isn't for the faint of heart. It requires a great deal of patience and attention to detail. If you're willing to put in the effort, it can be an effective method of vehicle protection. You can find a qualified professional to install a ghost immobiliser for you, and they can provide regular software updates to fix security weaknesses and enhance the performance of the system.

Disconnecting the Battery

A ghost immobiliser is an excellent way to safeguard your vehicle from theft but it can drain your battery if properly installed. The device needs to be connected to your vehicle's electric system, which means working with wires or bypassing factory components. It is therefore essential to employ a professional technician to install the device and follow instructions provided by the manufacturer. You could cause damage to your vehicle which will require costly repairs or replacing the battery.

A TASSA certified installer will use only the best equipment, including scanners that can examine the wiring of the vehicle to ensure it is in good shape. In addition, they will be familiar with the specific requirements of your car's model. They'll be able to locate the vehicle's wiring and perform repairs without causing damage to the original system. They will also be able to install the Ghost immobiliser in a discreet manner so that it doesn't hinder the aesthetics of your vehicle's interior or exterior.

The process of installing can be complicated, and it is essential to take your time. Before starting the project it is essential to read the manual, work in well-lit spaces and wear the proper safety equipment. This will help you avoid a lot of mistakes and ensure the safety of yourself and others around you when working with tools and electrical components.

Once you have disconnected the battery, you must locate a source of continuous power and an area for grounding. Note these locations using tape or labels to enable you to connect and disconnect them later. A multimeter can be used to test the power supply to verify that it has a consistent 12V output.

Making Connections

Installing a ghost immobiliser takes a great deal of time and focus. It involves working with delicate electrical components and a large number of wires, which is why it is crucial to take your time. Wear safety equipment such as protective gloves and eyewear. Work in an area that is well-lit.

After having carefully inspected the vehicle's wiring to identify the exact location of the CAN H and L wires, it's time to connect them. Use high-quality connectors to ensure a strong and solid connection. It is also essential to ensure that the connections are insulated to shield against damage and avoid accidental disconnections.

The Ghost immobiliser helps prevent car thefts by making it difficult for thieves to drive and start the vehicle. It stops the engine from starting without a PIN code having been entered, a beacon has been installed or a command has been sent via the WeCar mobile application. The system also allows you to remotely lock and disarm the system, which makes it ideal for people who frequently switch between vehicles or those who use their cars for service work.

The Ghost immobiliser differs from conventional immobilisers that depend on keys or codes to disable the engine. It is based on sophisticated algorithms which are almost impossible to hack. It's also concealed when installed, so thieves might not even know it is there. It can also be used conjunction with the GPS function, which will send you alerts when your car leaves its designated parking space which allows you to locate and track it. You can receive alerts via phone in the event that someone attempts to break in to your vehicle.

Insulating the Connections

A Ghost Immobiliser is the newest in vehicle security technology, linking directly to your vehicle's CAN data system, and stopping the engine from running without a PIN or sequence. This innovative device is discreet and doesn't require installation of traditional security systems or key fobs. It is a popular choice for drivers who want to secure their vehicles from theft.

When installing a Ghost Immobiliser, it is important to follow the installation guide closely to ensure accuracy. Make sure you check the locations of the CAN H and CAN L wires prior to starting the installation to ensure that you don't misidentify them, as this can cause the system to fail. It is also recommended that these wires are identified with tape or labels during the installation, as it is easy to lose them in the wiring loom. It is also essential to locate a power source with a constant 12V voltage and test it with a multimeter. This will ensure that the Ghost Immobiliser receives consistent power.

After the wires have been identified and connected, it is crucial to protect them from any electrical damage. This can be accomplished by wrapping the exposed wires in insulation or soldering them to make an efficient connection. It is crucial to use a high-quality soldering tool and properly mask your work area to prevent any errors.

The Ghost Immobiliser can be paired with a compatible tracker or alarm system to provide a greater degree of security for vehicles. This can aid in theft prevention and recovery, as the alarm or tracking system will notify the police if it detects any attempts to tamper with or start the vehicle.

Connecting the battery

To ensure that no wires could cause an accident-related short circuit make use of electrical tape to safely connect and insulate any damaged wires. Re-solder any connections. After reinserting the battery, you should test the immobiliser and vehicle's ignition system to make sure that all components are working properly.

If you have any issues during a ghost immobiliser install it is recommended to speak with a professional. They can assist you in identifying the problem and determine the best way to solve it.

how much is a ghost immobiliser is a great method to protect your car from theft, since it can prevent unauthorised engine starts and stop thieves in their tracks. The device is also unnoticeable to thieves who use codes or diagnostics as it doesn't use any radio frequencies.


A Ghost Immobiliser shouldn't be a drain on your battery in any significant way. It only draws a small amount (around 8mA) of power, therefore it shouldn't have any impact on the performance or operation of your car. However it is a possibility that if the device hasn't been installed correctly or has issues, it may draw more than it needs to and cause battery drain.

It is important to take the time to properly complete a ghost immobiliser installation will significantly reduce the likelihood of encountering issues later on. It is recommended to read the manual for your particular device and look up online resources for further guidance. This will give you the necessary tools and details to carry out an expert installation. The added security and peace of mind Ghost Immobiliser offers is well worth it.

Read More: https://banklevel3.werite.net/why-ghost-immobiliser-installation-is-more-difficult-than-you-imagine