Notes

Analyzing the combining performance of OAM supports into ring-core visual materials.
Rotala rotundifolia is a novel submerged macrophyte able to survive across the winter under temperature as low as 4 °C. Dynamic nutrient removal potential of R. rotundifolia was estimated using the Eco-tank system simulating natural eutrophic waters. The growth and physiological response of R. rotundifolia by cutting and division propagation to light (100%, 60%, and 20% natural light) were investigated. The results showed that R. rotundifolia was superior in removing N and P from eutrophic waters. As influent concentrations of NH4+-N and total phosphorus (TP) were 4.81-5.87 and 0.61-0.78 mg L-1, effluent concentrations of NH4+-N, total nitrogen (TN), and TP were separately 0.06-1.10, 0.40-1.59, and 0.05-0.17 mg L-1, with removal efficiencies of 93.6%, 84.6%, and 82.5% at a flow rate of 200 L d-1. The growth and morphology of the plant under two propagation patterns were influenced by light and the responses were quite different. The biomass of the plant by cutting was higher at low light conditions, and the plant allocated more biomass on above ground. However, there was no significant difference in the height. By division, the plant preferred to high light. The biomass and height were significantly higher at 100% natural light. The peroxidase (POD), superoxide dismutase (SOD) and root activities of plant by cutting showed a trend of decrease and followed by an increase with light reduction, while by division, they increased with reduced light available. Variations of chlorophyll and soluble protein of the plant by cutting and division were contrary to the changes of POD activity. These results suggest that R. rotundifolia can be used to effectively remove nitrogen and phosphorus in eutrophic waters, and high light promotes the growth of the plant by division, while suitable shade is needed for the plant by cutting.Antibiotics receive many concerns since their negative environmental impacts are being revealed, especially in aqua-agricultural areas. Rainfall events are responsible for transferring excess contaminants to receiving waters. However, the understanding of antibiotics transport and fate responding to rainfall events was constrained by limited event-based data and lacking integrated consideration of dissolved and particulate forms. We developed an intensive monitoring strategy to capture responses of fourteen antibiotics to different types of rainfall events and inter-event low flow periods. Pollutant-rich suspended particles, as high as 1471 ng/g, were found in low flow periods while the very heavy rainfall events and consecutive rainfall events stimulated the release of antibiotics from eroded soil particles to river water. Therefore, these rainfall events drove radical increase of dissolved antibiotic concentration up to 592 ng/L and total flux up to 25.0 g/d. Sulfonamides were particularly sensitive to rainfall events because of their residues in manure-applied agricultural lands. Transport dynamics of most antibiotics were accretion whereas only clarithromycin exhibited a dilution pattern by concentration-discharge relationships. Aquaculture ponds were inferred to significantly contribute tetracycline, oxytetracycline, and clarithromycin. Conventional contaminants were compared to discriminate potential sources of antibiotics and imply effective catchment management. The results provided novel insights into event-based drivers and dynamics of antibiotics and could lead to appropriate management strategy.The effects of agricultural green production technologies (AGPTs) on agricultural productivity and the environment have received increasing attention. With the panel data of agricultural production of mainland China from 2000 to 2017, this study investigates the role of AGPTs adoption rates in improving low-carbon efficiency by adopting a random-effects panel Tobit model. Results indicate that average adoption rates of AGPTs are less than 20% and unbalanced adoptions vary between the main and non-main grain-producing areas, as well as the northern and southern main grain-producing areas. Furthermore, AGPTs adoption reduces low-carbon efficiency at nationwide and main grain-producing areas. In the northern main grain-producing areas, water-saving irrigation and no-tillage seeding reduce low-carbon efficiency, while mechanized returning straw crushing promotes it. In the southern main grain-producing areas, deep tillage with fertilizer application and no-tillage seeding decrease low-carbon efficiency, while mechanized deep ploughing and scarification increases it. We also find that AGPTs can promote low-carbon efficiency through comprehensive mechanization level and mechanical input density. To improve low-carbon efficiency, we suggest that the improvement and diffusion of applicable AGPTs should be adapted to the local production conditions, and the agricultural machinery service, research and development system should be improved as well.Bioretention has been widely used in China for the purpose of sponge city construction. AC220 cost In subtropical climate areas, the performance of bioretention cell under condition of low infiltration underlying soil and heavy storms is still poorly understood. This study aimed to assess the effects of low infiltration underlying soil and precipitation characteristics on the hydraulic performance of a bioretention cell using the Storm Water Management Model (SWMM). The hydraulic performance of a bioretention cell were investigated under a Typical year rainfall event (P(total) (total precipitation) = 1299.2 mm) and seven heavy storms (i.e., Ptotal range from 53.1 mm to 287.3 mm), at different SF(i) (seepage rates of the underlying soil) (i.e., range from 2.5 mm/h to 15 mm/h). Then, sensitivity of the optimal design to the different design parameters, including the hydraulic conductivity of soil medium layer and the berm height of surface layer, was examined. The results show that the increase in SF(i) was effective in ihile other LID practices should be combined.Hazardous heavy metals and radionuclides in water and wastewater are of drastic concern owing to their detrimental impacts on the organisms as well as the circumambient ecosystem. To remove them as much as we can, both technique and materials were studied in the past years. The adsorption technique as superior water remediation method with the simplicity of design, environmental friendliness and high efficiency was well established. Consequently, it is practically important to explore advanced and economically feasible absorbents for removing these poisonous pollutants from aqueous solutions. So far, large numbers of experiments proved hydrothermally synthesized titanate nanomaterials (TNMs) could be a prospectively excellent adsorbent extracting heavy metals and radionuclides from water due to the high specific surface area, tunable pore size, abundant surface active sites, favorable hydrophilic properties. The objective of this work is to give an overview of hydrothermal synthesis, adsorption performance of TNMs for heavy metals and radionuclides, as well as the various influencing factors for water purification.
Read More: https://www.selleckchem.com/products/AC-220.html