Notes

15 Gifts For The Replacing A Window Handle Lover In Your Life
Tips For Replacing a Window Handle

It is easy to change your window handle in the convenience of your own home. Follow these guidelines to ensure an elegant and smooth finish.

Start by removing the screw covers to expose the screws inside the uPVC window handle. Measure the spindle to make sure you're getting the correct size replacement.

1. Measure the Spindle Length

If you're replacing a window handle, it's important to determine the dimensions of the spindle correct. It could affect the tightness or looseness of the handle, as well as whether the handle will lock correctly into the window frame. The spindle is the metal shaft that connects to the handle as well as the lock inside the window frame. The spindle is either a standard industry 8mm cross-section or older 9mm versions. The current industry standard is 8mm but this was not always the case. When purchasing a new handle, it's essential to check the dimensions.

The easiest way to measure the length of the spindle is to take off the handle you have already installed and this can be done by turning it into the open position, then unscrewing the two screws (which might be hidden behind plastic caps that will require removal) that retain the handle. Once the handle is removed, measure the distance from the base to the end. This will provide you with the measurements required to purchase a replacement.

There are a lot of options when it comes to selecting a new window handle, from sleek chrome that can fit in with a modern home, to traditional brass that looks stunning in restored Georgian rooms, or the more quaint Tudor cottages with curled monkey tail latches! The options are endless but the most important thing to do is choose a style that suits your home.

Espag handles are typically used to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles vary between 58mm and 62mm, but luckily there are replacements available for both sizes. Cadenza window handles have distinct dimensions because they have an angled blade which operates a multi-point lock mechanism inside the window.

Another factor when choosing the best window handle is determining what hand you will need, this is simply defined by the hand you use to open the door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles can only be used on windows that open in a single direction.

2. Remove the Handle

If the handle is damaged or simply worn out, a window handle that is shattered can be a real pain. The good news is that you can replace the uPVC handle yourself. You'll need only a few basic hand tools as well as some time to complete this process.

You must first open the window and then ensure that it's not locked. Next, you need to remove the screw caps that hold the handle in position. Once these are removed, you are able to work on removing the handle itself.

The handle itself is fixed to a spindle in the window frame. Depending on the type, this is held in place either with a screw or pin. The most commonly used types of handles are inline Espagnolette handles and handles with cockspurs. Both of these types of handles are used on casement windows, including aluminum windows. why not try this out can be locked by using a key to block access by unauthorised persons from outside. Or you can lock the handles by turning them clockwise.

To remove the handle, you will require a flat-bladed screwdriver. Once this is released, the handle will slide off the spindle. After the handle has been removed, you will be required to measure the length of the spindle and ensure that your new handle is compatible with this measurement.

Once you've determined the correct size for the handle, screw it in place. It is crucial to ensure that the handle is securely attached and rotates in the correct direction (clockwise in the case of an open and counterclockwise if handle is closed). It is also important to check that it has not been installed upside down.

Replace the screw caps. After you have completed this step, you can test the handle to make sure it's functioning properly. You can also test the locking system by shifting the handle from the unlocked position to the locked position and back.

3. Take off the Screws

A uPVC window handle is a crucial component of every home and is often the first item to show signs of wear and wear or damage. This can be caused by natural causes or from regular use, or malicious damage caused by opportunistic criminals who might seek to open a closed window and gain access to your property. However, a simple replacement is a simple solution and stop the problem from recurring.

uPVC handles could also be difficult to remove if the locking mechanisms are not functioning correctly. Most of the time, the issue is solved by replacing the multipoint lock rather than the entire handle and it's worthwhile to check this out because it could save you money.


Once you've removed the old handle, you'll have to take off the screws that were fixing it to the base. The screws are typically located on the inside of the handle base. It could be necessary to use a screwdriver accomplish this. Be careful not to tighten too much the handle since this could cause it to loosen.

Then, you'll need to find the pins or screws that secure the handle. Again these are likely to be located on the inside of the handle base and you'll need either a screwdriver or pair of pliers to take them off the screws. If you'd like to, you can replace the caps on the screws and test the handle to ensure it works properly.

Install the handle by aligning the spindle with the cutout in the window mechanism. Then screw it into. If you're looking to replace the screw covers, make sure the handle is in a slack position and that any screws are securely fixed. You're done! Now you can enjoy the new window handle. We hope this will allow you to avoid having to pay for costly window and door replacements in the future. Contact us if need more information on this or any other aspect of your uPVC window.

4. Fit the New Handle

The replacement of a damaged window handle or updating it is simple and can be accomplished in only a few simple steps. Identifying the type of window handle, determining its spindle length and knowing the tools you'll require to finish the job are crucial. Always prioritise the safety of your windows and tools. Take your time to follow the steps and make sure that you have a handle that is safe to use.

The first step is to identify the screws that hold your current window handle in place. Then, remove them, while keeping a safe hold on the handle itself to prevent it from falling and result in injury. Once the screws are removed and repositioned, they can be put in a safe spot to be replaced later.

After the handle that was used previously was removed, you can begin fitting the new one. The handle needs to be a perfect fit in order to function correctly and secure the window in its closed position. The next step is to slide the square metal bar at the back of the handle into the hole in your window mechanism, ensuring that it is secure.

The final step is to replace the screws caps and test the handle to ensure that it is working. If you aren't satisfied with the result or the window doesn't shut or open properly, call our experts for assistance.

Almost all UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point because of wear and tear or breakage. Anyone with a bit of DIY expertise can carry out the process. It is essential that the handle you select is in line with the style and size of your window. If you're unsure about what type of handle you require, don't hesitate to contact our team who will be able to provide you with the options available.

Read More: https://www.repairmywindowsanddoors.co.uk/hitchin-door-handle-repairs-near-me/