Notes

10 Skoda Superb Key That Are Unexpected
How to Fix a Skoda Superb Key Fob Not Working

A damaged key fob is an inconvenience, especially since it can prevent you from entering your vehicle or starting the car. The good news is that the majority of key fob problems can be resolved with a little troubleshooting and some common sense.

Replace the battery first. This is the most common problem that can be solved in a matter of minutes.

Dead Coin Battery

The first thing to determine if your key fob isn't working is the battery. If it's dead, the issue is easy to fix - simply remove it, replace it with a fresh one, and the key fob should be working again. This is vital because the batteries inside your key fob may not be long-lasting, and you might require replacement on a regular basis depending on how frequently you use it.


If the new battery doesn't fix the issue, there may be another issue with the key fob that needs professional help. Key fobs can be affected by a number of problems, including signal interference, worn-out buttons, water damage, receiver modules and dead batteries. To determine whether any of these issues are the reason behind the issue, it's beneficial to have a spare key fob which is working to determine the cause of the issue.

The battery of 12 volts in the key fob is vital to power the on-board electronics, including the central locking and remote keyless systems. The remote keyless system will not function in the event that the battery is defective, or if it has lost its charge. To test the battery, remove the negative cable and then the positive cable for a short time. This will drain the remaining electrical energy from the circuit and reset it. The remote keyless system will function again.

If you have an extra key fob, it's worth changing the program on the original one to see if this solves the issue. The procedure for reprogramming the key fob is easy and involves switching on the ignition and leaving it on, pressing the unlock button 5 times, with a one second interval between each press, and waiting 6 seconds after the horn sounds to start the coding process.

Worn Buttons

Whatever way you take care of your key fob, it is likely to break at some time. Fortunately, most key fob problems are not major and can be easily repaired by replacing the battery. In certain situations, it could be necessary for the fob to be replaced. However, before you do this it is important to ensure that the replacement battery is of the same voltage and size as the original battery.

You can always use an additional fob to determine whether the issue is with the car or the fob. If it doesn't work then the issue is with the vehicle and you will be required to take it to the dealer.

The buttons on your key fob have a lot of wear and tear, and are more likely to break or pressurized over time. As a result, they can become erratic and stop working properly. This is more common in the event that the key fob was lost or left in the rain. If this occurs pressing the buttons gently can help to restore their functionality.

You can also remove the battery and clean it using electronic cleaner or isopropyl. It is also important to ensure that the retaining clips made of metal are clean and tight. This will ensure that the contacts are in good alignment.

Signal interference is another potential issue. It could be caused by radio transmitters or objects nearby or even the weather. Your key fob may only work if near your car. This can be fixed by removing the source.

Water Damage

If the electronics in the key fob of yours have been damaged by water, it may prevent it from working properly. It may cease to function completely or only function when you are near the vehicle. The first thing you need to consider is replacing the battery. It's a cost-effective and simple fix that can be accomplished using a flathead or thumb screwdriver.

It is essential that the coin battery in your key fob is in good condition. A damaged or dead battery can hinder the key fob's functioning.

If you have a spare key fob, try using it to see whether the issue is related to the receiver module in your car or if it's an old battery that needs replacing. This will help you figure out if the problem is with the skoda key fob or is it something else that requires professional attention.

If you have tried the battery trick, but still cannot get your key fob from skoda to work it could be because of a signal interference problem. This is a frequent issue that can be caused by a variety of things, like other electronic devices operating on the same frequency. Interference can be caused by bad weather or other objects that interfere with radio waves. This type of problem can be difficult to diagnose in certain situations because it's not always evident. If you find that your key fob only works when it's near the vehicle, it's an indication of a signal interference issue.

Receiver Module Issues

It's possible that the receiver module is faulty in the event that your key fob doesn't function. This is the chip which communicates with other modules in your vehicle to lock and unlock doors. If the chip has developed a fault it is likely to need to be replaced.

Signal interference could also be the cause. If your key fob's transmitter is too close to the transmitter, signals may interfere and cause it to cease working. This could be caused by radio towers, TV or mobile phone antennas and even household appliances. If you suspect that this is the issue try shifting your keyfob away from any source and check if it is working again.

Check that the metal clips holding the key fob in place are not damaged or loose. The clips hold the battery and complete the circuit. If they are loose or damaged, the battery will not receive any power and the remote won't work. It is recommended to replace the battery with a fresh one of the same voltage and size to avoid damaging the key fob.

Another reason why the key fob won't work could be because the key fob was exposed to salt or water. If your key fob has been submerged in water, it's important to remove the battery and clean the chip with isopropyl alcohol or an electronic cleaner. You should also make sure that the chip is dry prior to reinstalling the chip in the key fob.

While it is always frustrating when your key fob stops working, it's important to remember that it is not the end of the world and that you can still use your vehicle. In fact it's a good idea keep a spare key fob in your car in case of emergency.

Signal Interference

Sometimes your key fob can begin to show signs of issues that don't necessarily have to do with to the battery, but could be due to signal interference from other sources. It could be due to radio transmissions from other cars nearby or wireless devices, and even key fobs. A scan tool for OBDII can help you see the issue and help you determine what you should do to repair it.

It can be a real pain if your car key fob isn't working. Fortunately, the majority of issues are fairly easy to fix and diagnose. In some instances, a replacement keyfob may be needed.

The coin battery is the most common cause of the key fob not working. While it is possible to re-charge the battery, it is generally more cost effective to simply replace it.

It is also crucial to make sure that the new battery is a good fit. If you're buying a new button cell battery it is a good idea to purchase one that has the same voltage and size as the original battery. If you choose to use an unsuitable battery right size, it could cause damage to the inside of your key fob.

Other reasons that your key fob might not work could be due to water damage, worn buttons or a poor connection. If your key fob is acting up, it is a good idea to try using a spare fob to see if it works. If skoda car key not working The Key Lab does, it could indicate that the problem is isolated to the fob that you use and not the car itself. If not, this could indicate a more severe problem.

Read More: https://www.thekeylab.co.uk/skoda-car-keys/