Notes
Notes - notes.io |
Sodium-ion batteries (SIBs) have potential as an energy storage system because they have similar electrochemical properties as lithium-ion batteries, abundant resource reserves, and extremely high safety performance. Compared with traditional graphite materials, conductive polymers are more suitable as an anode electrode material for SIBs. In this study, a simple and scalable approach has been used to synthesize p-toluenesulfonic acid-doped polypyrrole (p-TSA-PPy). The as-obtained material showed remarkable rate capacities and cyclability. At room temperature (25 °C), its discharge capacities could reach 185, 162, and 135 mAh g-1 under 10, 30, and 50 C rates after 250 cycles, respectively. More importantly, the capacity of the p-TSA-PPy could still be maintained at 120.5 mAh g-1 even at the 2000th cycle at 10 C. In addition, it achieves attractive electrochemical performance at different temperatures (0 and 50 °C).Significant control over the properties of a high-carrier density superconductor via an applied electric field has been considered infeasible due to screening of the field over atomic length scales. Here, we demonstrate an enhancement of up to 30% in critical current in a back-gate tunable NbN micro- and nano superconducting bridges. Our suggested plausible mechanism of this enhancement in critical current based on surface nucleation and pinning of Abrikosov vortices is consistent with expectations and observations for type-II superconductor films with thicknesses comparable to their coherence length. Furthermore, we demonstrate an applied electric field-dependent infinite electroresistance and hysteretic resistance. Our work presents an electric field driven enhancement in the superconducting property in type-II superconductors which is a crucial step toward the understanding of field-effects on the fundamental properties of a superconductor and its exploitation for logic and memory applications in a superconductor-based low-dissipation digital computing paradigm.Quantitative understanding of nanoscale interactions is a prerequisite for harnessing the remarkable collective properties of nanoparticle systems. Here, we report the combined use of liquid-phase transmission electron microscopy and electron beam lithography to elucidate the interactions between charged nanorods in a predefined potential energy landscape. In situ site-selective lift-off of surface-functionalized lithographed gold nanorods is achieved by patterning them with adhesion layer materials that undergo etching at different rates. Analysis of the subsequent nanorod motion, which is two-dimensionally confined as a result of the particle-substrate attraction, allows quantification of interparticle interactions in a lithographically engineered environment. For lithographed nanorods patterned with the same adhesion layer material, their self-assembly behavior following lift-off is tuned by changing their starting spatial arrangement. Our approach facilitates investigation of interparticle interactions in designed nanoparticle systems and affords fundamental insights into the role of the potential energy landscape in determining the kinetic pathway for nanoparticle self-assembly.Synthetic molecular circuits implementing DNA or RNA strand-displacement reactions can be used to build complex systems such as molecular computers and feedback control systems. Despite recent advances, application of nucleic acid-based circuits in vivo remains challenging due to a lack of efficient methods to produce their essential components, namely, multistranded complexes known as gates, in situ, i.e., in living cells or other autonomous systems. Here, we propose the use of naturally occurring self-cleaving ribozymes to cut a single-stranded RNA transcript into a gate complex of shorter strands, thereby opening new possibilities for the autonomous and continuous production of RNA strands in a stoichiometrically and structurally controlled way.Understanding of the temperature-induced phase transition of poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA) random copolymers with varied composition remains largely incomplete. Upon heating they can form either macroscopically phase-separated aggregates or micelles. We examined the effect of polymer architecture by rationally designing and synthesizing various POEGMA copolymer structures via atom transfer radical polymerization using OEGMA monomers of different EO lengths. Micelle formation occurred for copolymers with a small fraction of long side chains counterbalanced by an appropriate number of short side chains, while macroscopic phase separation occurred for other copolymer compositions. In some copolymer compositions and architectures, micelle formation followed by macroscopic phase separation occurred, and the temperature of these phase transitions could be tailored accordingly. This new strategy allows the control over the microstructure and specific transition temperatures enabling, for instance, the preparation of nanocarriers for encapsulating hydrophobic compounds.Recently, bioaerosols, including the 2019 novel coronavirus, pose a serious threat to global public health. Herein, we introduce a visible-light-activated (VLA) antimicrobial air filter functionalized with titanium dioxide (TiO2)-crystal violet (CV) nanocomposites facilitating abandoned visible light from sunlight or indoor lights. NVP-BSK805 The TiO2-CV based VLA antimicrobial air filters exhibit a potent inactivation rate of ∼99.98% and filtration efficiency of ∼99.9% against various bioaerosols. Under visible-light, the CV is involved in overall inactivation by inducing reactive oxygen species production both directly (CV itself) and indirectly (in combination with TiO2). Moreover, the susceptibility of the CV to humidity was significantly improved by forming a hydrophobic molecular layer on the TiO2 surface, highlighting its potential applicability in real environments such as exhaled or humid air. We believe this work can open a new avenue for designing and realizing practical antimicrobial technology using ubiquitous visible-light energy against the threat of infectious bioaerosols.
Read More: https://www.selleckchem.com/products/nvp-bsk805.html
|
Notes.io is a web-based application for taking notes. You can take your notes and share with others people. If you like taking long notes, notes.io is designed for you. To date, over 8,000,000,000 notes created and continuing...
With notes.io;
- * You can take a note from anywhere and any device with internet connection.
- * You can share the notes in social platforms (YouTube, Facebook, Twitter, instagram etc.).
- * You can quickly share your contents without website, blog and e-mail.
- * You don't need to create any Account to share a note. As you wish you can use quick, easy and best shortened notes with sms, websites, e-mail, or messaging services (WhatsApp, iMessage, Telegram, Signal).
- * Notes.io has fabulous infrastructure design for a short link and allows you to share the note as an easy and understandable link.
Fast: Notes.io is built for speed and performance. You can take a notes quickly and browse your archive.
Easy: Notes.io doesn’t require installation. Just write and share note!
Short: Notes.io’s url just 8 character. You’ll get shorten link of your note when you want to share. (Ex: notes.io/q )
Free: Notes.io works for 12 years and has been free since the day it was started.
You immediately create your first note and start sharing with the ones you wish. If you want to contact us, you can use the following communication channels;
Email: [email protected]
Twitter: http://twitter.com/notesio
Instagram: http://instagram.com/notes.io
Facebook: http://facebook.com/notesio
Regards;
Notes.io Team