Notes

10 Locations Where You Can Find Ghost Immobiliser Install
Autowatch Ghost Immobiliser Installation


The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It is discreet It does not include LED indicators or key fobs and is hidden within the vehicle's wiring.

The user can also disable the system temporarily by using Transport Mode when renting their car. This guide will take you through the process of installing a Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your car against key cloning attacks, hacking attacks and relay attacks. The system is connected directly to the ECU of your car and protected by a PIN code that you choose. It is not detected by thieves using diagnostic scanners and other modern methods. It is not able to be disabled using circuit cuts.

The system is simple to use, however it is essential to have a professional installation to ensure a clean and secure connection to your vehicle's ECU. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's security package.

First, the installer must disconnect your battery in order to avoid accidental airbag deployment or short circuits. After this is completed, the installer can safely begin work. Hand tools are the most basic to be used for precise connections. A multimeter is useful to verify electrical values. Insulation tape and cable tie are essential to protect connections and ensure that wiring is neat. Lastly, the user manual offers specific instructions specific to your Ghost Immobiliser model.

It is important to choose the right grounding spot that is free of paint or debris during installation. Installers should also ensure that the immobiliser's wires CAN H and the CAN L are connected to the proper ECU ports. Depending on the model, these wires could require soldering or plugged in. To ensure a stable and durable connection it is recommended you choose a high-quality plug.

Once the installation is complete After the installation is complete, the customer can turn on the Transport Mode. This allows mechanics or valet parking to use the vehicle, without having to know the pin code. The customer has to press the icon for service on the dashboard five times within 2 seconds. Once this is done the system will confirm with 5 indication signals.

The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a smart option for those who regularly rents their vehicle through platforms such as Turo. Having an immobiliser can also lower insurance costs, as it greatly reduces the chance of theft.

Getting Started

It's not difficult to come up using an autowatch immobiliser if you want to protect your car from theft. The device prevents your vehicle from running even when someone copies or steals your key. This is due to its advanced technology, which is designed to stop the car's engine from starting unless the correct PIN code is entered.

The device works by connecting to the CAN bus network of your vehicle and allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and steering wheel to create a unique sequence only you can identify and makes it impossible for someone else to start your vehicle. This is the best way to safeguard your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.

Installing a ghost ignition is an easy process, however, it is crucial to follow the steps carefully to avoid electrical issues and system malfunctions. First, you have to find and locate a permanent 12V power source and an adequate grounding point on the chassis of your vehicle. Then, you can start connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a solid connection. Connect the connections with heat shrink tubing or insulation tape, as well as other materials to avoid short circuits of electricity.

Once the wires are connected, you are able to connect the battery and start the engine to determine whether the immobiliser works. If everything is functioning properly then you can put it in a safe location under the dash or somewhere else in the vehicle. Be sure to conceal it securely so that a thief cannot alter it.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it meets the highest standards of security and is a fantastic deterrent to car thieves. It is impervious to key cloning and hacking and is not able to be disabled without the code. It is also simple to use and is able to be put into a service valet mode so that your car is not activated when you bring it in for service or an MOT.

Wiring

The Ghost Immobiliser, a cutting edge security system, is designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus and communicates with the ECU, making it a virtually undetectable addition to your vehicle. In contrast to other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with any of your vehicle's factory settings.

It's also completely undetectable to thieves using diagnostic scanning devices. The system doesn't send or receive radio frequency signals, but instead uses CAN data to communication with your ECU. It doesn't require any modifications to your existing key fobs.

Enter the sequence to disarm (either two or one button) and turn on the ignition of your car to activate Ghost Immobiliser. The indicator will flash two times to confirm that you've entered the correct code. Once you've verified this, you're able to start your car and drive away with peace of mind.

Once installed, Ghost Immobiliser protects your car against key cloning or hacking while protecting its value. If you have to surrender your car to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.

To complete a Ghost Immobiliser installation, you'll need find the source of power that is constant (12V) and an earthing point. Be sure that both are well-insulated and can be touched. Cable ties are also recommended for bundling and secure the wires. This will reduce the possibility of theft by thieves. To avoid mistakes, make sure to double-check these points and mark them with the use of tape or labels. It's recommended to inspect every connection for signs of wear and tear. Make sure all connections are securely in place, and are properly sealed. Make ghost 2 immobiliser cost to test your Ghost Immobiliser after installation has been completed. This will ensure that the unit is functioning properly and that all connections are secure and insulated. If you encounter any issues, be sure to address them immediately.

Testing

The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your vehicle's ECU to stop unauthorised motor starting. Its cutting-edge technology protects your vehicle from hacking and key cloning along with other common methods employed by thieves to steal cars. The Ghost is also able to work in conjunction with other alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unparalleled features, combined with its discreet design, make it a popular option for both car enthusiasts as well as security-conscious drivers.

It is crucial to follow the procedures for installation to ensure the correct integration of the Ghost Immobiliser. The best place to start is to look over the vehicle's wiring diagram that will serve as a guideline to locate and connecting the required wires. You'll then need to identify the power and grounding sources. Once you've found them, you'll have to mark them so that they are easily identifiable during installation. It's important to use high-quality materials and tools. Basic hand tools can assist to make precise connections, while a multimeter will confirm electrical values and guarantee safety. Cable tie and insulation tape ensure that all connections are neat. A Ghost-specific user manual is also available.

Before you begin installing it is essential to test the system by entering the PIN code, then starting the vehicle. This step will confirm the immobiliser works as intended and stop unauthorised vehicle starts. This step should be performed regularly as part of your routine inspections of your vehicle to ensure that the system is always working correctly.

Once the installation is complete, you can drive your vehicle with confidence. The Ghost will help keep your precious possessions secure from thieves who might steal it and ensure that no one can escape with your car without the correct PIN. The Ghost can be paired with an approved Thatcham tracker that identifies any attempts to steal or tamper with. This allows you to track your vehicle if it is stolen.

The Ghost is compatible with a variety of vehicles, including those made by all major manufacturers. If you're looking to secure your vehicle with this cutting-edge device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA registered installer, which assures us that we follow strict guidelines for installing our products. This assures customers, insurance companies, and law enforcement agencies that installations are done safely and properly.

My Website: https://www.g28carkeys.co.uk/ghost-car-immobiliser-fitting-and-installation/