Notes

Fitting a Cat Flap
The process of installing a cat flap may seem intimidating, but it is fairly simple with the proper instructions. First, decide how high you would like the flap to be (on average or belly height). Mark this point on your door and then use the included template to guide you when drilling.

If you have a small kitten you can prop the door slightly open and gradually encourage it to enter. Reward it each time it goes through.

Take a measurement of the door

A cat flap lets your pet to move into and out of your home at the time that is convenient for you. This can help keep your cat healthy as it will ensure it is exercising regularly and be able to go back inside if it is trapped outside in bad weather. This will cut down on the time you spend letting your cat in or out and also make your home secure by notifying you when it's left.

It is important to make sure that the cat flap is set up correctly to stop your pet from being forced through through it by other animals (e.g. dogs). It is crucial to determine the height of your pet's belly as well as the entrance to your home in order to make sure that the flap is at the correct height. If your cat is a little larger or shorter than the normal, you can adjust the position of the flap by moving it up or down by a tiny amount.

The next step is to utilize a spirit level mark the center of the door that you will install the flap. Using the marking as a reference, use a jigsaw and cut out the form of the flap within the door. After cutting the flap, sand down the edges to create smooth surfaces. Make any holes that are required.

The installation of a cat flap should not take longer than two hours. The process is a bit more difficult if you have to put it in the case of a uPVC door or composite one. This is because these doors come in various thicknesses, which could affect the way the holes are cut. We recommend to consult with an expert if this is your first time working with glass.

Measure Your Cat

You can avoid hours of listening to the pet meow to be allowed in or out. This is especially helpful when your cat is in the house during all seasons while you work.

If cat flap in upvc door cost are planning to install a cat flap in your door it is important that you determine the size of your cat prior to beginning the task. Although it might seem like an easy task, it is important to get the measurement right or your cat may find it difficult to use.

First, make sure your cat is calm before taking measurements. You will have to hold your cat in a place where they cannot move. Also, ensure that the measuring tape is straight and not bent against the body. By keeping the ruler or measuring tape against their body from the top of their head to the tip of their tail will allow you to determine an accurate measurement.

Once you've figured out the measurements of your cat's body, it's time to look at the door and decide where you want to place the flap. The best option is to position the flap on the highest point of your cat's belly because it will allow them to pass through it with minimal effort. This will also stop the flap from making a lot noise as it moves back and forward.


You must think about the thickness of the uPVC or composite door too. While timber doors are all of a similar thickness, uPVC and composite doors may differ in their overall design and this can make the installation of the cat flap more difficult as you will need to ensure that the hole you cut is the right size for your pet.

You can also use the template drawing included in the instructions to mark the location of the hole on the door. This will allow you to see the location where the opening should be and ensure that the template is properly placed on the door. It is also beneficial to utilize a spirit-level to make sure that the template is placed perfectly against the door.

Cut the Flap

You'll need to cut an opening in the door to accommodate your cat flap prior to you can attach it. This is a difficult job, and it is recommended that you seek the help of a professional cat flap fitter for this job should you not have the expertise or knowledge to tackle it yourself. It is also recommended to read the instructions included with the kit to find out how to do it correctly.

To do this, you have to measure the height of your cat's or kitten's belly. Use this as a reference point. A good rule of thumb is to put the flap of your cat about 10 centimeters from the ground as this is roughly the average height of the cat's belly. Your cat will be able to move through the flap with ease and it will also give the other cats or neighbours who are snooping an issue when trying to leave or enter.

Mark the position of the cat flap on the door with pencil. If your kit has the template you can place it on the door. Utilize the markings on the template to drill holes at every corner. You will then be able cut out the shape of the template and replace it with your cat flap.

You can install the cat flap yourself inside a wood or uPVC door If you're comfortable using a Jigsaw. Make sure you don't cut through any of the door's mullions, or vertical rails. You can use a jigsaw to cut the panel into a circle or square according to the design of your cat flap. Remember to take your time and don't try to make the jigsaw cut faster.

After the hole has been cut, carefully place your cat flap in its new home. Make sure that it is securely secured. If the flap is fitted with screw caps, push them onto the protruding bolts. After the screws are installed then sand the rough edges and seal any gaps. This will prevent draughts from entering your home.

Install the Flap

If you have a simple cat flap, you can leave it open and encourage your pet to walk through by putting a little bit of cat food in front of the door. Alternately, you can push the cat through with your hands or a stick. Once your cat is accustomed to moving through the flap, it will be in a position to move at will. This will allow you to let it in and out as it wants.

You can fit an animal flap inside an UPVC or glass door however it's not as simple as fitting it into a wooden exterior door due to the fact that the UPVC and glass doors don't have the same thickness. This can have a major impact on how you cut the flap's hole, and whether the flap fits correctly after installation.

The mounting kit may include a template that shows you the best places to drill holes. If the kit doesn't include an example you can use a photocopier to create your own. When cutting, it is important to avoid pushing the jigsaw too to the point that you make a larger hole than you need in your door.

Most cat flaps are rectangular or square in shape, however there are also some which are circular, and they are generally more difficult to place. If you have a circular flap it's important to make sure the hole is in the correct position on your door, because if it's not, the cat can't use it and could be stranded in the open all day (or even night).

Certain cat flaps come with locks that allow you to control the time your cat enters and leaves. These are useful if your pet is afraid of leaving in the dark or returning in the dark. They can also be useful if you work all day. The lock can be used for entry or exit and some locks can be locked in either direction allowing you to shut the door completely. This is particularly beneficial for sick or elderly cats who aren't willing to go out in rainy weather.

Homepage: https://gentry-armstrong-2.technetbloggers.de/fitting-a-cat-flap-1729811636