Notes

Fitting a Cat Flap
Installing a cat flap your home is a fantastic step for any pet owner. There are a variety of options for you, no matter if your cat is getting older and needs extra security or if you have kittens who need to be checked.

It can be difficult for those who aren't professionals to put in the cat flap, but with proper guidelines, it's easy. Preparation, planning and accuracy are the most important factors.

Select the Right Door, or Windows

There are a myriad of kinds of cat flaps, some of which have locks that can be used to keep your pet from going out or in, while others have modern features such as microchips or a door entry systems. It is important to think about how easy it is for your cat to train to use the flap before you purchase and fit one.

It is recommended to put the cat flap, based on the design of your house, in an opening that leads into a sheltered garden area. This will help your cat feel secure when entering and leaving your home. This will also enable them to get back inside if they're pursued by a pet or human who wants to hurt them.

You can install an egress flap inside the form of a uPVC door or glass window however it's not as simple as putting one in wooden doors. It's because uPVC or composite doors are available in various thicknesses. This can impact the how holes are cut and the material you put to.

To avoid costly mistakes to avoid costly mistakes, it is recommended to consult an expert glazier prior to installing the flap on a door with a glass front. If you're fitting the flap on an old wooden door, begin by introduction of your cat to it prior to fitting it, so that they be familiar with its size and shape and explore it from every angle.

Measure Your Cat's Belly

In order to put in a cat flap that's a good fit for your pet, you'll need to measure your cat. This will allow you to ensure that the cat flap is installed at the right height for the window or door, and that it is large enough to allow him to enter and out easily.

To do this, put your pet on their back and gently rub your fingers along their belly. Find a squishy fat pad around the lower back and face, as well as the legs. The padding helps protect your pet and allows it to move more freely, especially when performing feline acrobatics.

Alternately, you could make use of your pet's weight to determine the size of an opening you need. If your cat weighs more than 5Kg, for example the suggested cat flap opening size is 14x12cm.

Measure your windows or doors

This kind of cat flap, as the name suggests, is designed to be installed into the door. It lets your pet enter and exit at its convenience. They are usually made of plastic or aluminium and simply are placed in the middle of the door. They have a two-way swinging door that is opened by pushing lightly on either side. The flaps are available in locking versions that provide additional security which means that your cat can't enter the door from outside.

Cat flaps are also commonly employed in windows. They are able to be easily installed, however they have to be set at an elevated level since cats and dogs have a difficult time to access them. If the window is not sufficient to accommodate a cat's flap, then you can make use of steps, ramps or specially designed stairs to help the animal reach it.

It is possible to put a cat flap into a brickwall, but it is not recommended for people who aren't experienced in brickwork. This could weaken the wall's structure. It is important to make sure there are no cables and pipes in the wall prior to you begin. Always consult a professional if you need to cut a hole in the wall for pipes or cables. It is also recommended to wear protective goggles and a dust-proof mask to prevent inhaling any sawdust generated by cutting holes in the walls of your home.

Select the Right Cat Flap

There are a variety of cat flaps on the market and all of them offer different features. Some are equipped with security features such as magnetic locks or microchip recognition to stop unauthorized entry and prevent your pet from allowing friends or other animals into the house. Some have insulation as well as weatherproof seals to keep out water and drafts.

There's also a variety of sizes depending on the size and breed of your pet. Some cat flaps are rectangular while others are circular or square. Selecting the best cat flap will be determined by the space you have available as well as the type of door or window you intend to install it on.

Finally think about the mechanism for opening your cat flap is likely to have. The most affordable option is a simple swing-out aluminum or plastic door. However, it won't prevent other cats or pets from entering and you may let draughts through as well.

It's time to put in your cat flap. Make a mark on the belly of the door using your ruler. Use a spirit level to ensure that the line is straight on the door and not too low. Draw a template for the shape of the cat flap using your spirit level as a reference. Then, use a Jigsaw to cut the outline in the door. When you are satisfied with the result, sand the edges down and drill through the pencil lines to make holes for screws.


Make sure you have the tools ready

Like any DIY jobs, it's always recommended to have the right tools for the job. The main things you'll need are the cat flap itself, a tape measure and a good pencil, a spirit level, drill, file, and the jigsaw (depending on your windows or doors).

If you're installing a composite door, consult with the manufacturer prior to making any changes, because this could affect the warranty or damage the weathertight seal. In this case it's likely that you'll need to replace the glass with a new piece of toughened glass.

For wooden or uPVC doors will require cutting out the shape of your cat flap using the jigsaw and follow the instructions given by the manufacturer. Use a template to mark out the size hole you'll require.

After you have cut the hole, you will have to sand the edges of the opening. This will stop the possibility of water damage and rust. You should also cover the holes in your window or door and the back of the cat flap to block wind and rain. When the sealant has dried then you're now ready to put in your new cat flap!

Install the Flap

Installing a flap allows your cat to come and go whenever it wishes. cat flap install can put in the flap themselves. However when you plan to install it in the form of a glass or uPVC type door, you might need an expert.

Begin by studying the instructions included with your cat flap to find the template. This will provide you with an idea of where the holes for the flap will need to be drilled into the door. Then, mark the areas in which you will need to drill with a pencil.

After you've marked the area in your door, use a jigsaw to cut out the shape of the cat flap. This is a relatively simple task however you'll need be comfortable using a jigsaw. If you are worried about doing this yourself, there are many companies that can complete this for you at a very low cost.

Next, you will need to attach the interior part of the cat flap to the hole in your door. You may have to apply sealant before doing this to ensure that it remains weather-proof and water resistant. The outside of your cat flap could be placed on top of the bolts, and then tightened together. You must test the cat flap on your cat to confirm that it is working correctly and allows them to exit and enter easily.

Read More: https://mcclanahanbojse.livejournal.com/profile