Notes

Fitting a Cat Flap
The process of installing a cat flap may seem intimidating however it's actually quite simple to install by following the correct instructions. Determine how high you would like the cat flap (normally it's at belly height). Then, mark funny post on the door and then use the template provided as a reference to drill.

If you have a small kitten, prop the door slightly open and gradually encourage it to pass through. Reward it as it passes through.

Measure the Door

A cat flap is a great option to let your pet come and go inside and out of your house as it pleases. This can help with keeping your cat healthy by ensuring that it gets exercise as well as being able to get back in if stuck outside in bad weather, especially in winter. This can reduce the time you allow your cat out or in, and keep your home safer by letting you know when it's left.

However, it is essential that the flap for your cat is fitted correctly to prevent your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is essential to measure the height of your pet's belly as well as the entrance to your home so that you can ensure that the flap is at the proper height. You can adjust the position of your flap if your cat is smaller or taller than average.

Then, use a spirit-level to mark the middle of the door. This is where you will put in the flap. Then, using the mark as a guideline, cut out the form of your flap on the door with the aid of a jigsaw. After cutting the area, sand down the edges to create smooth surfaces. Drill any holes you need to.

Installing a cat flap ought to not take longer than two hours. The process can be slightly more complicated if you are required to install it in the case of a uPVC door or a composite one. This is because composite doors come in various thicknesses, which could affect the way the holes are cut. We always recommend to consult with an expert when this is your first experience working with glass.

Measure Your Cat

You can save yourself hours of ignoring the cat's meows to be allowed in or out. This is especially helpful for those who work most of the day and your cat is in the house waiting for you to get home in any weather.

If you are planning to install a cat flap in your door it is important that you measure your cat before attempting the task. It may appear to be a simple task, but it's important to get the measurements right. Otherwise, upvc door panel cat flap may have difficulty putting it in use.

First, ensure that your cat is calm before you begin taking measurements. You will need to hold them in a manner that they cannot move and ensure that the measuring tape or ruler is flat against their body and not bending in any place. You can get an accurate measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you've got your cat's measurements, it's time to examine the door to determine where to place the flap. Place the flap at the level of your cat's belly. This will allow them to go through the door without much effort. This will also avoid the flap making lots of noise when it swings open and closed.

You will also need to think about the thickness and the structure of the uPVC door or composite. While timber doors are all of a similar thickness, uPVC and composite doors may differ in their overall design and can make fitting a cat flap more complicated because you must make sure that the hole you make is the proper size for your pet.

It is also worthwhile reading through the directions that come with the cat flap kit to find a template drawing that can be used to mark out the location of the hole in the door. This will help you to see where the opening needs to be and also make sure the template is properly placed on the door. Using a spirit level to check that the template is sitting flush against the door will also prove beneficial.

Cut the Flap

You'll need to make an opening in the door panel to install your cat flap prior to you can install it. It can be a difficult task, so it's recommended that you engage a professional to assist you if you don't have the skills or experience. You can also refer to the instructions provided with the kit to discover how to do it correctly.

You can take the height of the cat's or kitten's stomach to guide you. A good guideline is to set the cat flap about 10-15 centimeters away from the ground since this is approximately the average belly height for cats. This will let your cat pass through the flap with ease and make it difficult for other cats or naughty neighbours to enter or exit.

Once you've decided the location where the cat flap needs to be located, mark the position on the door with the help of a pencil. If your kit includes an outline of paper, place this over the door and use the markings to drill holes into each corner of the template. You will then be able to cut the shape of the template and replace it with your cat flap.

If you are installing your cat flap in the form of a door made of wood or uPVC, you can do this yourself if you are confident enough to use the Jigsaw. Be sure not to cut through the mullions or rails that run vertically of your door. You can use a Jigsaw to cut your panel into a circle or square according to the way you'd like it. Take your time and don't try to make the jigsaw cut faster.

Once the hole is made, carefully place the cat flap into its new place of residence. Make sure it is securely secured. If it features screw caps, then push them onto the protruding screws. After the screws are installed then sand the rough edges and seal any gaps. This will prevent the entry of draughts into your home.

Install the Flap

If you have a basic cat flap, you can open it and encourage your pet to walk through by putting a small amount of cat food in the front of the door. You can also try pushing the cat with the help of a stick or your hands. Once your pet has become used to walking through the flap it will be in a position to move as it pleases. This lets you let it in and out whenever it's wanted.

It is possible to fit a cat flap into a UPVC or glass door however it's not quite as straightforward as fitting one into a timber external door since the UPVC doors and some glass doors don't have the same thickness. This can have a major impact on how you cut out the flap hole and also whether the flap will fit correctly after installation.

The mounting kit might contain a template that outlines where to drill holes. If the kit doesn't come with a template, you can make one on your own. It's important not to push the jigsaw too in order to cut, so it doesn't make a larger than necessary hole in your door.


Certain cat flaps come in circular shapes, which can be more difficult to install. If you have a circular flap, it is essential to ensure that the hole is in the proper location on your door as if it's not, your cat will not be able to use the flap and may be stuck outside all day (or even night).

Some models of cat flap have locks that allow you to regulate when your cat comes in and goes. This is useful if your pet is afraid of leaving in the dark, or coming back to the house at night. They can also be useful when you are working all day. Some locks can be used for access or exit, and others can be locked both ways. This is beneficial for sick or older cats who do not want to venture out in cold weather.

Homepage: https://telegra.ph/Fit-a-Cat-Flap-in-a-UPVC-Door-Panel-10-28-2