Notes

Fitting a Cat Flap
It might seem daunting to put up the flap for your cat however, with the proper instructions, it's not too difficult. Decide how high you'd like your cat flap to be (normally it's located at the belly height). Then, mark this area on the door, and use the template included as a reference to drill.

If you have a kitten who is still a baby and you want to keep the door open, gently prop it slightly open and allow it to pass through. Reward it when it goes through.

Take a measurement of the door

A cat flap is a wonderful method to allow your pet to move in and out of your home whenever it pleases. This can help keep your cat healthy since it will ensure it is exercising regularly and also be able to go back inside when it is stranded outside in bad weather. It can also cut down on the amount of time you need to let it out or in and will also help protect your home by allowing you to know when it's been out.

It is crucial that the cat flap is properly fitted to stop your pet from escaping through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet's stomach and the size of the doorway in your home to make sure the flap is at the correct height. If your cat is a little longer or taller than the normal, you can adjust the flap's position by moving it upwards or downwards by a small amount.


The next step is to make use of a spirit level to mark the center of the door that you will be installing the flap. Using the marking as a guide, take the jigsaw and cut the shape of the flap in the door. After you have cut the area then sand the edges to create smooth surfaces. Drill any holes you need to.

The process of fitting the cat flap isn't as complicated as you think and it should not take more than two hours to finish the entire job from start to finish. However, the process can be a bit more difficult if you need to fit it onto a uPVC or composite door because these doors come with a wide range of thicknesses which can affect how the holes are cut and the type of door they are inserted into. This is why we recommend calling an expert to do the job, particularly if you have never worked with glass before.

Measure Your Cat

A cat flap can spare you from hours of listening to your pet meow to let it out or in. This is especially helpful for those who working all day and your cat has to stay in the waiting room until you come home regardless of the weather.

It is important to first measure your cat before attempting to install. It may seem like a simple task, but it's important to make sure you measure the right measurements. In the event that you don't, your cat might find it difficult to use.

Firstly, make sure your cat is relaxed and not anxious prior to taking the measurements. You'll need to hold them in a manner that they cannot move and ensure that the ruler or measuring tape is flat against their body, not arching in any places. You can take a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.

Once you've determined your cat's measurement, it's time to look at the door to determine where to place the flap. Place the flap at the level of your cat's belly. This will allow them to go through the door without much effort. This will also avoid the flap from making quite a lot of noise when it swings open and shut.

You will also need to take into consideration the thickness and structure of the uPVC door or composite. Although through wall cat flap are of a similar thickness, uPVC and composite doors may differ in their overall structure and this can make the installation of a cat flap more complicated since you have to make sure the hole you cut is the correct size for your pet.

You can also use the template drawing included in the instructions to mark the position of the opening on the door. This will enable you to determine where the hole needs to be placed and ensure that the template is set precisely on the door. Utilizing a spirit level to ensure that the template is sitting in a straight line against the door can prove beneficial.

Cut the Flap

Before you can put in your cat flap you have to cut the door panel to create a space large enough for it. This can be a daunting job and it is recommended that you hire a professional to assist you if you don't have the skills or experience. It is also recommended that you review the directions that come with the kit to find out how to do this properly.

You can consider the height of your cat's or kitten's stomach as a reference. As a rule of thumb put the flap about 10-15 centimeters above the ground. This is the average height of the belly for cats. This will allow your cat to pass through the flap with ease and make it more difficult for other cats or naughty neighbours to get inside or out.

Draw the location of the cat flap on the door with a pencil. If your kit comes with the template you can place it on the door. Utilize the markings on the template to drill holes at each corner. You will then be able cut out the template's shape and replace it with your cat flap.

If you are installing your cat flap in the form of a door made of wood or uPVC, it is possible to do this yourself if you are comfortable with using a jigsaw. Make sure you don't cut through any of the door's mullions or vertical rails. You can use a jigsaw cut the panel into a square or circle, depending on the design of your cat flap. Be patient and don't make the jigsaw cut faster.

Once the hole is made, carefully place the cat flap in its new place of residence. Make sure that it is firmly secured. If it has screw caps, then push them onto the screws that protrude. Once the screws have been installed smooth the edges and seal any gaps. This will prevent the entry of draughts into your home.

Fit the Flap

If you have a basic cat flap, you can leave it open and encourage your pet to go through by placing a small amount of cat food on the outside of the door. You can also try pushing the cat through using your hand or a stick. Once your cat has become accustomed to moving through the flap, it will be in a position to move at will. This allows you to let it in and out at any time it wants.

You can fit an animal flap inside the UPVC or glass doors however it's not as simple as fitting one into a timber external door because the UPVC and glass doors don't have the same thickness. This could have a significant impact on the way you cut the flap's hole, and whether the flap fits correctly after installation.

Depending on the model of cat flap you choose It could come with its own mounting kit as well as a template that shows exactly where to drill holes for it. If the kit does not include an example you can copy it to make your own. It's important to not use the jigsaw to hard when cutting, so that it doesn't leave a bigger than necessary hole in your door.

Some cat flaps come in circular designs, which are more difficult to put in. If you have a round flap, make sure the hole is in the correct place on the door. Otherwise, the cat might not be able to use it, and may be locked outside for the entire day (or night).

Certain models of cat flaps have locks which permit you to control the time your cat comes and goes. This is useful if your pet is afraid of leaving in the dark or returning in the dark. They can also be helpful for those who work all day. The lock can be turned on for entry or exit and some locks can be locked in either direction allowing you to shut the door completely, which is particularly beneficial for older or ill cats who aren't willing to go out in bad weather.

Homepage: https://blogfreely.net/dadease74/cat-flap-cover-for-winter