Notes

Fitting a Cat Flap
It might seem daunting to install a cat flap but with the right instructions it's not that hard. Determine how high you would like your cat flap to be (normally, it is at the belly height). Then, mark this area on the door and use the template included as a reference to drill.

If you have a young kitten you can prop the door slightly open and gradually push it to pass through. Reward it as it passes through.

Measure the Door

A cat flap is a great option to allow your pet to come and go in and out of your house as it pleases. This can keep your cat healthy as it will ensure it gets enough exercise and will also allow it to return inside if it is trapped outside during bad weather. This can reduce the time you spend letting your cat out or in and make your home safe by notifying you when it has left.

It is essential to ensure that the cat flap is installed correctly in order to prevent your pet from being pushed through or escaping through it by other animals (e.g. dogs). You should measure the height of your pet's belly and the size of the doorway at your home to ensure the flap is at the proper height. You can adjust the position of your flap if your cat is taller or smaller than the average.

Then, use a spirit-level to mark the center of the door. This is where you'll install the flap. With the markings as a reference, use a jigsaw and cut out the form of the flap within the door. Once you've cut the door, sand the edges of the door to smooth the surfaces. Then drill any fixing holes needed.


Fitting a cat flap should not take longer than two hours. However, the process can be slightly more complicated in the event that you have to put it inside a uPVC or composite door since these doors have various thicknesses, which affect how the holes are cut and what they are inserted into. We always suggest to consult with an expert for your first time working with glass.

Measure Your Cat

You can avoid hours of listening to the pet's meow to be allowed in or out. This is particularly helpful when your cat is in the house during all seasons while you work.

cat flaps for french doors is important to measure your cat's measurements first before you attempt the installation. Although it might appear to be to be a simple task, it is essential to measure the right way or your cat will find it very difficult to use.

First, ensure that your cat is calm and not feeling anxious prior to taking the measurements. You will need to hold them in a way that they are not able to move, and ensure that the measuring tape or ruler is flat against their body and not arching in any places. Keeping the ruler or measuring tape against their body from their head to the tip of their tail can allow you to determine an precise measurement.

Once you've got your cat's measurement, it's time to look at the door to decide where to place the flap. The best option is to place the flap on the highest point of your cat's stomach as it will allow them to move through it with minimal effort. This will also prevent the flap from making a lot of noise as it moves back and forward.

It is also important to think about the thickness and the structure of the uPVC door or composite. While all timber doors have the same thickness to them, uPVC or composite doors are different in their overall design. This could make the process of fitting an enclosure for your cat more difficult since you must ensure that the hole is the right size.

It is also worthwhile reading through the directions included with the cat flap kit to locate an illustration template that can be used to mark out the location of the hole in the door. This will allow you to determine where the hole must be located and ensure that the template is placed precisely on the door. Utilizing a spirit level to ensure that the template is sitting in a straight line against the door will be very helpful.

Cut the Flap

You'll need to make a hole in the door panel for your cat flap before you can put it in place. This is a difficult job and it is recommended that you seek the help of a professional cat flap fitting service for this job if you don't have the expertise or knowledge to do it yourself. It is also recommended to review the directions that come with the kit to discover how to do this properly.

You can use the height of the cat's or kitten's stomach as a reference. In general you should place the flap about 10-15 centimeters above the ground. This is the average height of the cat's belly. This way, your cat can move through the flap with ease and it will also give other cats or snooping neighbours a tough time trying to leave or enter.

Mark the position of the cat flap on the door using pencil. If your kit has an outline you can place it on the door. Use cat flaps for french doors on the template to drill holes at each corner. Then, you should be able to cut the template's shape and replace it with your cat flap.

If you are installing your cat flap on a door made from wood or uPVC, it is possible to do it yourself if feel confident enough to handle using a Jigsaw. Be sure to not cut into any of the door mullions or vertical rails. You can use a Jigsaw to cut your panel into a circle or square, depending on how you'd like to cut it. Take your time and don't try to make the jigsaw cut faster.

Once the hole is made and the flap is firmly positioned, carefully place the flap of cat food into its new home and make sure that it's securely fixed. If the flap has screws, push them onto the protruding bolts. After the screws are installed then sand the rough edges and seal any gaps. This will prevent draughts from entering your home.

Fit the Flap

If you have a simple cat flap, you can leave it open and encourage your pet to use it by placing a small amount of cat food in front of the door. You can also try pushing the cat using the help of a stick or your hands. Once your cat is accustomed to walking through the flap it will be able to move into and out as it wants, so you can let it in or out without having to be there holding the door open to allow it in all day (and potentially in all weather conditions).

It is possible to install an animal flap into an UPVC door or glass door, however it might not be as simple as installing one inside a wooden exterior door. This is due to the fact that the doors made of UPVC and some kinds of glass doors don't have a uniform thickness. This could have an enormous impact on the way you cut out the flap's hole and whether the flap fits correctly after installation.

The mounting kit may include a template showing you the best places to drill holes. If the kit doesn't come with a template you can use a photocopier to make your own. It's important to not push the jigsaw too hard when cutting, so it doesn't leave a bigger than needed hole in your door.

through wall cat flap of cat flaps are rectangular or square in shape, however there are some that are circular and these are typically more difficult to install. If you have a circular flap, it's essential to make sure the hole is in the proper position on your door because if it's not, your cat can't use it and could be stranded in the open all day (or even night).

Some models of cat flap have locks which permit you to regulate the time your cat comes and goes. These are useful when your cat is scared of leaving in the dark, or coming back in the dark. They are also useful for those who work all day. Some locks can be used for either entrance or exit, while others can be locked in both directions. This is helpful for older cats or sick cats who aren't keen to venture out in cold weather.

Read More: https://stairways.wiki/wiki/Replacement_Upvc_Door_Panel_With_Cat_Flap