Notes

Fitting a Cat Flap
The process of installing a cat flap may be a bit daunting however it's actually quite simple to install with the proper instructions. First, decide how high you want the cat flap to be (on average, belly height). Mark this point on the door and then use the template included as a guideline to drill.

If you have a small kitten hold the door open a bit and gradually push it to pass through. Reward it as it passes through.

Take a measurement of the door

A cat flap lets your pet to move into and out of your home at its convenience. This will keep your cat healthy since it ensures that it is exercising regularly and be able to go back inside when it is trapped in the elements during bad weather. It can also cut down on the amount of time you'll have to let it out or in and will also help ensure your home is secure by letting you know when it has gone out.

However, it is essential that the flap for your cat is fitted correctly to prevent your pet from escaping through it or be pushed through by other animals (e.g. dogs). You should determine the height of your pet's stomach and the height of the doorway in your home to ensure the flap is at the proper height. If your cat is larger or shorter than the average, you can adjust the flap's height by moving it up or down a small amount.

The next step is to utilize a spirit level mark the center of the door that you will put the flap. Then, using the markings as an outline, cut the form of your flap using a jigsaw. After you've cut the flap then sand the edges to create smooth surfaces. Drill any necessary holes.

Installing a cat flap ought to not take more than two hours. However, the process may be slightly more complicated when you have to install it into the door of a uPVC or composite door since these doors come in a wide range of thicknesses, which affect how the holes are cut and what they are inserted into. We always suggest to contact an expert for your first time working with glass.

Measure Your Cat

You can avoid hours of ignoring the pet's meow to be allowed in or out. This is especially useful when your cat is inside in all weathers when you are at work.

If you're planning to put a cat flap in your door it is important that you determine the size of your cat prior to beginning the task. It might seem like a simple task, but it is crucial to measure your cat correctly. In the event that you don't, your cat may have difficulty putting it in use.

Firstly, make sure your cat is calm and not stressed prior to taking the measurements. You'll need to keep them in a manner that they cannot move and also make sure that the measuring tape or ruler is flat against their body and not bending in any place. You can get an accurate measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.

Once you've determined your cat's measurements and measurements, you need to examine the door to decide where to put the flap. It is advisable to place the flap in the middle of your cat's belly as this will allow them to pass through it with minimal effort. This will also stop the flap from making a lot of noise when it swings back and forth.

You should think about the thickness of the uPVC or composite door too. While timber doors are all of the same thickness, uPVC and composite doors can be very different in their overall construction and can make fitting a cat flap more complicated as you will need to make sure that the hole you make is the proper size for your pet.

You can make use of the template included in the instructions to mark the position of the hole in the door. This will help you determine where the opening must be, and also to make sure the template is placed correctly on the door. It is also helpful to utilize a spirit-level to make sure that the template sits in a straight line against the door.

Cut the Flap

Before you can put in your cat flap you must cut the door panel to make it large enough for it. This is a difficult job, and it is recommended to seek out the assistance of a professional cat flap fitting service to complete this task should you not have the knowledge or skills to do it yourself. You can also consult the instructions that come with the kit to discover how to do it right.


You can consider the height of your cat's or kitten's stomach as a guide. A good rule of thumb is to put the cat flap about 10-15 centimeters off the ground, as this is the typical height of the cat's belly. This way, your cat will be able to move through the flap with ease and also give the other cats or neighbours who are snooping difficult time trying to get in or out.

Mark the position of the cat flap on the door using the pencil. If your kit comes with a template you can place it on the door. Use the markings on the template to drill holes at each corner. You will then be able to cut the template's shape and replace it with your cat flap.

You can install your cat flap yourself inside a wood or uPVC door when you're confident with the use of a jigsaw. Be careful not to cut into the mullions or rails that run vertically of your door. You can use a jigsaw to cut the panel into a circle or square according to the design of your cat flap. Take your time and don't make the jigsaw cut faster.

Once the hole is cut, carefully place your cat flap into its new place of residence. Make sure that it is securely secured. If it features screw caps, then push these onto the screws that protrude. Once the screws have been installed then sand the rough edges and seal any gaps. This will block the entry of draughts into your home.

Place the Flap

If you have a basic cat flap you can open it and encourage your pet to go through by putting a small amount of cat food in front of the door. You can also push the cat with sticks or your hand. Once your cat is accustomed to walking through the flap, it is likely to be able into and out as it wants, so you can let it out and in without keeping the door open to allow it in all day (and potentially in all weather conditions).

You can fit the flap onto the UPVC or glass doors although this may not be as simple as fitting one into a timber exterior door due to the fact that the UPVC doors and some glass doors don't have the same thickness. This could have a significant impact on how you cut out the flap's hole, and how well the flap fits after installation.

The mounting kit might include a template that shows you where to drill holes. If the kit doesn't come with the template, you can photocopy it to create your own. When cutting, it's crucial to avoid pushing the jigsaw too far enough to create a bigger hole than necessary in your door.

The majority of cat flaps are square or rectangular in shape but there are some that are circular, and they are usually more difficult to install. If cat flap installation near me have a circular flap, it's essential to make sure the hole is in the correct position on your door, because if it's not, the cat will not be able to use the flap and could be left in the open all day (or even night).

Certain cat flaps have locks that allow you to control the time your cat can enter and leave. These are useful if your pet is afraid of leaving in the dark or coming back to the house at night. They can also be useful when you are working all day. Certain locks can be used for either entrance or exit, while others can be locked both ways. This is useful for sick or elderly cats who don't want to venture out in cold weather.

Here's my website: https://fkwiki.win/wiki/Post:Fit_a_Cat_Flap_in_a_UPVC_Door_Panel