Notes

Fitting Cat Flap in UPVC Door Panel
Cat flaps let your cat go in and out at their own pace, without having to let them in or out. They also can help stop your cat from peeing in the house.

Installing a cat flap on a upvc door panel is a lot easier than a glass door, however it requires some knowledge and the proper tools.

Take a measurement of the door

Installing a cat flap on the door isn't easy but as long as you choose the right type of cat flap be patient and follow the steps provided it should not prove to be too much trouble. We will show you how to draw the shape, then use the jigsaw to slice the area in the door and then finish the job by securing the cat flap to the door. This will ensure that the flap is in place and also protects the doors from damage caused by rain and wind.

The first step is take a measurement of the width of your pet in order to get a precise measurement of what size of cat flap you will require. This will allow you to choose a cat flap that is large enough to allow your pet to enter the house and exit without needing to open the door every time.

If your kit comes with an illustration of where to drill, then put it on the door and then draw around it. If your door has a moulding or sill on the bottom of it ensure that you have enough clearance from these as this will keep your cat safe and stop them from gaining access to your home.

Set a square to ensure that you're cutting correctly and ensure that the hole is a perfect rectangle shape. Once you are happy with this, you can begin removing the rest of the door material. If you have a square that you have cut, use it to check that you're cutting properly and also to ensure that the hole is in a rectangular shape. Once you are satisfied with the shape, you can start to remove the rest of the door material.

Draw a Line

The cat flap lets you to let your pet inside and outside without worrying about unwanted visitors or unwelcome gifts. It also prevents draughts, and keeps your home's temperature steady. Installing a cat flap on your door may seem daunting to those who haven't done it before. Many people call a professional carpenter or joiner to do the job. While this is definitely an option, it is possible to complete the task yourself if you have the proper tools and follow instructions carefully.

While this is far simpler to accomplish when using a timber door it is still possible to do this in uPVC doors - although you need to be very careful to avoid damaging the doors, as this can end the warranty. First, you need to examine the door's measurements to ensure it will accommodate the new cat-flap. If you have a standard uPVC panel, this should be easy. However, if your door is composite or another type of door, you might require more care.

Next, you will need to determine the belly height of your cat. This is the height from the floor to the lower part of the cat's stomach, and you will need to find a spot on the door where this measurement will fall within the range your pet can comfortably go through. Once you've figured out the measurements, you'll be required to mark the space with a spirit level and a pencil, so that you know the hole will be suitable for your cat.

Once you've marked the area, it is time to make the hole. You will need a jigsaw and it is important that you be patient to ensure that the cuts are smooth and clean rather than rough and uneven, as it could cause damage to your door. Wear safety glasses and a dust mask while working with the jigsaw. Inhaling sawdust is dangerous for your health. After you have finished cutting the hole, you will require sandpaper for smoothing the edges so that the cat flap is easily inserted into the hole.

Cut a Hole

The process of fitting a cat flap to an existing door panel or double glazing sealed unit can be difficult. You may be tempted to tackle the job yourself, but unless have plenty of expertise in DIY, it's likely to be best to have a professional to do the task for you. A faulty job can not only be unsightly and unattractive, but could also be an security risk. It could allow cold air in when the cat is outside and hot air out when inside.

The first thing you have to do is mark the position of the hole in the door using an eraser and an ax level. This will ensure that it is properly positioned and that it runs in a straight line with the other parts of the door. Make sure you have some sandpaper to smooth any rough edges.

Wear any safety equipment you'll need to use a power tool. If you're concerned about the noise, you can buy a jigsaw with a cord that is quieter and easier.

It is crucial to only cut away the material needed for the fitment of the cat flap. It is essential to leave some extra material to make the wall thickness of the flap. However cutting off too much material can cause issues or even damage to the door frame.

A upvc door may have a metal frame or a panel inside that will interfere with the microchip cat flap, and if this is the case you will need to cut an over-sized hole to ensure that the metal doesn't get in contact with the wall of the cat flap. If this is done it is essential to fill in the oversize gap and render it watertight.

If you're installing the cat flap onto the frame of a double glazed window with a metal frame then you will need to speak to a specialist who can supply you with a new glass pane with the hole for the cat flap already drilled inside. It is cheaper to do this than trying to fix the flap to an existing glass pane that hasn't been designed specifically for the purpose.

Fit the Flap


Cat flaps allow your pet to come and go as they please, giving them the freedom to relax in the home whenever they're feeling like it. However, if you have an uPVC door it can be difficult to put in a cat flap, especially when you don't have glass panes that can be cut to accommodate one. If you're looking to install a half-glazed uPVC replacement panel, it's possible to add a cat flap. It's not as easy as simply cutting a hole in the door though and there are some things you'll need to take care of first to ensure that it's safe.

A uPVC, GRP or composite door panel typically comprises an extremely thin plastic outer skin joined to a soft polystyrene insulating core. The material is quite fragile and care should be taken when cutting through it to avoid damaging. This type door comes with a template that you can use to cut the hole.

Once visit the next page have marked the position of the hole in your door, now it's time to install the flap. You can pick from a range of options, from simple push-button units to microchip-activated ones that only let your pet in. But, regardless of the kind of cat flap you choose it is essential to ensure that your cat can comfortably use the flap and not get stuck outside in the rain.

It's a good idea to opt for circular fittings instead of one that is square, since circles can be more securely cut into door glass. It's because square holes are more likely to crack the glass when they are drilled. It's also a safer option as you're not at risk of having to drill into toughened glass that may break and cause injury to your pet or your family. This is particularly important if you have child or elderly person at home who could be injured by shards glass.

Here's my website: https://www.repairmywindowsanddoors.co.uk/corby-cat-flap-installer-near-me/