Notes

Phage vB_PaeS-PAJD-1 Rescues Murine Mastitis Contaminated with Multidrug-Resistant Pseudomonas aeruginosa.
o the challenge of incorporation and exploitation of organo-functional groups or nanofilaments. So far, the great majority of methods developed for the functionalization of mesoporous silica is based on postsynthesis grafting or co-condensation approaches, which suffer from serious limitations with oriented films (pore blocking, lack of ordering). We demonstrated the uniqueness of EASA combined with click chemistry to afford a versatile and universal route to oriented mesoporous films bearing organo-functional groups of multiple composition. This opened perspectives for future developments and applications, some of which (sensing, permselective coatings, energy storage, electrocatalysis, electrochromism) are also considered in this Account.Development of sensors uniting different sensing principles is in line with the concept of reliable, comprehensive, and diversified equipment construction. However, the current exploration in this field is obstructed by compromise of reaction conditions and inevitable mutual interference arising from different sensing modes. This work reported a closed bipolar electrode (c-BPE) strategy for dual-modality detection or dual-target detection. To this end, a c-BPE sensing platform installed in physically separated anode and cathode compartments was well designed and carefully optimized. https://www.selleckchem.com/products/exarafenib.html If luminol was present in the anode section and Prussian blue (PB) was at the cathode part, single stimulation could realize electrochemiluminescence (ECL) from luminol at the anode and conversion of PB to Prussian white (PW) at the cathode. The latter reaction helped elevate the ECL signal and also prepared for colorimetric detection as color change from PW to PB under the trigger of oxidant (like H2O2) was used to track the content of the oxidant. Thus, dual signals were obtained for dual-modality detection of single target or the detection of different targets was realized at different poles. Detection of glucose was carried out to validate the application for dual-modality detection, while VLDL/AChE and NADH/H2O2 assays illustrated the potential of dual-target detection. The proposed platform possesses outstanding sensing performance including selectivity, repeatability, long-term stability, accuracy, and so forth. This work implements a breakthrough in designing dual-mode sensors and is expected to present a rational basis for development of a diversified sensing platform.Vaccination represents the most effective way to prevent invasive pneumococcal diseases. The glycoconjugate vaccines licensed so far are obtained from capsular polysaccharides (CPSs) of the most virulent serotypes. Protection is largely limited to the specific vaccine serotypes, and the continuous need for broader coverage to control the outbreak of emerging serotypes is pushing the development of new vaccine candidates. Indeed, the development of efficacious vaccine formulation is complicated by the high number of bacterial serotypes with different CPSs. In this context, to simplify vaccine composition, we propose the design of new saccharide fragments containing chemical structures shared by different serotypes as cross-reactive and potentially cross-protective common antigens. In particular, we focused on Streptococcus pneumoniae (Sp) 19A and 19F. The CPS repeating units of Sp 19F and 19A are very similar and share a common structure, the disaccharide ManNAc-β-(1→4)-Glc (A-B). Herein, we describe the synthesis of a small library of compounds containing different combinations of the common 19F/19A disaccharide. The six new compounds were tested with a glycan array to evaluate their recognition by antibodies in reference group 19 antisera and factor reference antisera (reacting against 19F or 19A). The disaccharide A-B, phosphorylated at the upstream end, emerged as a hit from the glycan array screening because it is strongly recognized by the group 19 antisera and by the 19F and 19A factor antisera, with similar intensity compared with the CPSs used as controls. Our data give a strong indication that the phosphorylated disaccharide A-B can be considered a common epitope among different Sp 19 serotypes.The development of modern agriculture has prompted the greater input of herbicides, insecticides, and fertilizers. However, precision release and targeted delivery of these agrochemicals still remain a challenge. Here, a pesticide-fertilizer all-in-one combination (PFAC) strategy and deep learning are employed to form a system for controlled and targeted delivery of agrochemicals. This system mainly consists of three components (1) hollow mesoporous silica (HMS), to encapsulate herbicides and phase-change material; (2) polydopamine (PDA) coating, to provide a photothermal effect; and (3) a zeolitic imidazolate framework (ZIF8), to provide micronutrient Zn2+ and encapsulate insecticides. Results show that the PFAC at concentration of 5 mg mL-1 reaches the phase transition temperature of 1-tetradecanol (37.5 °C) after 5 min of near-infrared (NIR) irradiation (800 nm, 0.5 W cm-2). The data of corn and weed are collected and relayed to deep learning algorithms for model building to realize object detection and further targeted weeding. In-field treatment results indicated that the growth of chicory herb was significantly inhibited when treated with the PFAC compared with the blank group after 24 h under NIR irradiation for 2 h. This system combines agrochemical innovation and artificial intelligence technology, achieves synergistic effects of weeding and insecticide and nutrient supply, and will potentially achieve precision and sustainable agriculture.An inverted pyramidal metasurface was designed, fabricated, and studied at the nanoscale level for the development of a label-free pathogen detection on a chip platform that merges nanotechnology and surface-enhanced Raman scattering (SERS). Based on the integration and synergy of these ingredients, a virus immunoassay was proposed as a relevant proof of concept for very sensitive detection of hepatitis A virus, for the first time to our best knowledge, in a very small volume (2 μL), without complex signal amplification, allowing to detect a minimal virus concentration of 13 pg/mL. The proposed work aims to develop a high-flux and high-accuracy surface-enhanced Raman spectroscopy (SERS) nanobiosensor for the detection of pathogens to provide an effective method for early and easy water monitoring, which can be fast and convenient.We report that micrometer-scale droplets of thermotropic liquid crystals (LCs) can be positioned inside living mammalian cells and deployed as chemical sensors to report the presence of toxins in extracellular environments. Our approach exploits droplets of LC enclosed in semi-permeable polymer capsules that enable internalization by cells. The LC droplets are stable in intracellular environments, but undergo optical changes upon exposure of cells to low, sub-lethal concentrations of toxic amphiphiles. Remarkably, LC droplets in intracellular environments respond to extracellular analytes that do not generate an LC response in the absence of cellular internalization. They also do not respond to other chemical stimuli or processes associated with cell growth or manipulation in culture. Our results suggest that droplet activation involves the transport and co-adsorption of amphiphilic toxins and other lipophilic cell components to the surfaces of internalized droplets. This work provides fundamentally new designs of biotic-abiotic systems that can report sensitively and selectively on the presence of select chemical agents outside cells and provides a foundation for the design of structured liquid droplets that can sense and report on other biochemical or metabolic processes inside cells.The design of high-performance and cost-effective electrocatalysts for water splitting is of prime importance for efficient and sustainable hydrogen production. In this work, a surface defect engineering method is developed for optimizing the electrocatalytic activity of perovskite oxides for water electrolysis. A typical ferrite-based perovskite oxide material La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) is used and regulated by selective acid etching. The optimal parameters for the surface treatment are identified. An efficient bifunctional perovskite oxide, denoted LSCF-30, is prepared by selectively corroding the A-site Sr element in the surface region, which is found to not only increase the exposure and decrease the coordination of B-site metals but also effectively modulate the electronic structure of these metals. The crystal lattice of the perovskite bulk is kept constant during surface engineering, which ensures the structural stability of the perovskite catalyst. The findings demonstrate an effective strategy of surface defect engineering in enhancing the performance of perovskite oxide electrocatalysts for water splitting.Multifunctional hydrogels are a class of materials offering new opportunities for interfacing living organisms with machines due to their mechanical compliance, biocompatibility, and capacity to be triggered by external stimuli. Here, we report a dual magnetic- and electric-stimuli-responsive hydrogel with the capacity to be disassembled and reassembled up to three times through reversible cross-links. This allows its use as an electronic device (e.g., temperature sensor) in the cross-linked state and spatiotemporal control through narrow channels in the disassembled state via the application of magnetic fields, followed by reassembly. The hydrogel consists of an interpenetrated polymer network of alginate (Alg) and poly(3,4-ethylenedioxythiophene) (PEDOT), which imparts mechanical and electrical properties, respectively. In addition, the incorporation of magnetite nanoparticles (Fe3O4 NPs) endows the hydrogel with magnetic properties. After structural, (electro)chemical, and physical characterization, we successfully performed dynamic and continuous transport of the hydrogel through disassembly, transporting the polymer-Fe3O4 NP aggregates toward a target using magnetic fields and its final reassembly to recover the multifunctional hydrogel in the cross-linked state. We also successfully tested the PEDOT/Alg/Fe3O4 NP hydrogel for temperature sensing and magnetic hyperthermia after various disassembly/re-cross-linking cycles. The present methodology can pave the way to a new generation of soft electronic devices with the capacity to be remotely transported.A spherical hollow carbon framework decorated with functional heteroatoms is designed and synthesized using ultrasonic spray pyrolysis as a potential anode material for lithium metal batteries (LMBs). The pore structure of the hollow carbon framework can be tailored by melamine, which is a functional additive for integrating abundant nanopores and the uniform decoration of heteroatoms in the structure. The large surface area and pore volume of the hollow carbon framework offer enhanced reversibility and capability for metallic Li storage. In addition, the dendritic growth of Li and volume changes induced by repeated Li plating and stripping can be effectively suppressed during cycling. More importantly, atomic-scale decorations of heteroatoms can effectively lower the overpotential for the nucleation and growth of metallic Li inside the hollow carbon framework. It is mainly responsible for improving the cycle performance and rate capability, even at a high current density. Finally, the hollow carbon framework anode shows stable behavior toward Li plating and stripping without significant capacity fading in the LMBs than conventional Li metal anodes.
Read More: https://www.selleckchem.com/products/exarafenib.html