Notes

What Is Replacing Upvc Window Handles And How To Use It
Replacing uPVC Window Handles

It is easy to change the handles on upvc windows. The important thing is to ensure that the replacement handle fits the spindle cut out in the window mechanism.

If you follow the steps below any cockspur handle can fit on most windows. The height of the step of the handle is important.

What to Look For

A lot of windows in the UK come with uPVC handles, and over time they can begin to show signs of wear and tear. The window handle can become loose or difficult-to-operate when this happens. Anyone who is comfortable with basic hand tools can accomplish this fairly simple task.

The first thing to do is ensure that the handle is firmly fixed to the window frame and in the open position. The next step is to locate the fixing pins or screws that hold the handle in the position it is in. These are usually located on the inside of the handle. They can be removed with an screwdriver or pliers.

Once the handle has become loose it can be taken from its hinges by gently pulling off. Then, you will need to locate a replacement handle that is the same size and style. This can be done on the internet or at the local DIY store and it should take about five minutes with an screwdriver.

When replacing the handle on a uPVC handle, it is important to consider the step height. This is the distance from the base of the handle until it sits on the window frame. It is generally an accepted measurement, however it is essential that you check the step height of your current handle before ordering an entirely new one.


Depending on the type of handle you are using, there are different sizes available. Inline handles are offered for uPVC window with lug centres of 31mm while cockspur handles have lug centres of 43mm. Tilt and turn handles are commonly found on windows made of uPVC and they come with a unique design that allows windows to be tilted to allow for ventilation, and then turned to open the window completely.

The most frequent uPVC handle breakage is internal cracking rather than a fracture from the base. This makes it difficult to open. It is essential to ensure that any replacement handle is fitted with the same spindle as the original one.

Remove the Old Handle

If your window handles are damaged or incorrectly fitted, they can cause double-glazed windows to open and close incorrectly. They may even get stuck. There are many reasons for this like general wear and tear, or corrosion of the metal handle. In these cases it is crucial to replace the upvc window handle as soon as you can to prevent further damage or loss of function.

One of the first things to do when replacing window handles made of upvc is to remove the old handle from the window. To do this, start by removing the screw that is encased when the handle is in its closed position. Once you have removed that screw, you can remove the handle. replacement conservatory door handles Repair My Windows And Doors is recommended to make use of an electric screwdriver for this as it will make the task much easier and quicker.

Be aware that screws can be hidden beneath caps made of plastic. It is best to remove the covers with a Stanley knife. After removing the handle, you will be required to inspect the square cutout on the base to ensure that the new handle for the window lock is compatible. It is important to measure the length of the spindle on the old handle and then compare it with the dimensions of the window mechanism spindle cutout.

The various types of upvc window handles are: Espag handles, which have a central screw and can turn left or right; Cranked handles with two screws, and are used on tilt and turn windows made of upvc as well as Spade handles, which have an arm that is flat and can be used on either side of the window. It is simple to replace the handle after you have identified one that is suitable. Simply screw it into place, and make sure the spindle is correctly inserted in the lock mechanism. After you have done this then tighten the handle to the window frame. The new upvc handles should now be secure.

Take a look at the Spindle

If you're replacing a Upvc window handle that has fallen off, it's likely due to the spindle that holds it in place has become loose or damaged. In some cases, you can tighten the spindle with pin or screw. In other instances, it may need to be replaced entirely. There are many different kinds of handles made from upvc. There are three kinds of handles: inline espagnolette, tilt-and-turn, and cockspur. Each type of handle is mounted and replaced in a different way.

It is crucial to measure the handle before purchasing an alternative. This will ensure that the handle fits the window in a proper manner and will be of the correct size. Fortunately, all handles adhere to industry standards of sizing making it relatively easy to identify the correct size.

To measure the size of your handle first remove it from the window by turning it to the open position. You should be able to determine the size of the pin or screw that holds the handle. Use a ruler or a tape measure to determine the length the spindle is. Once you have determined the length of the spindle, you can purchase a new one that is the same length.

When purchasing a replacement, it is important to be aware of the step height of a upvc window handle. The step height is measured from the base to the point at which the handle is positioned on the frame. In general, this is approximately 21mm for uPVC windows, and 9mm for aluminium. To make sure that the new handle will fit, you can drop something in the gap to see how far it goes before it comes into contact with an obstruction.

Cockspur handles may have different backsets based on the kind of window you want to install them in. Inline espag handles have a standard height of 43mm centre to centre (2 fixing points). Cockspur handles however they have different backsets according to the design of the window they're in. This is because they have spurs that extend from the handle and is secured over a cockspur wedge striker plate.

Install the New Handle

Once you've selected the new handle, ensure that it is aligned with the holes for screws on the door. Then, secure it with the screws provided. If you're replacing the latch lever it can be put in similarly to the main door handle. After that, attach the door trim to conceal the mounting screws.

Tips: To remove a metal head from a wedge made of wood, place the handle on the floor, so that its wide end is level with the ground. Then, use a hammer and tap the thin end. Be careful not to damage the handle or spindle.

Here's my website: https://www.repairmywindowsanddoors.co.uk/colchester-door-handle-repairs-near-me/