Notes

Ten Situations In Which You'll Want To Know About Lock Replacement
Door Lock Replacement - What Are the Different Parts of a Door Lock?

A broken door lock can make your home a target for burglars. It is an inexpensive way to beef up security without making your door inaccessible.

Many locks come packaged with a cardboard model that you can wrap around the edges of your door to make sure it fits properly. This will ensure that you don't buy the wrong lock.

The Cylinder

The cylinder, also referred to as the body of the lock, is the most important component of a traditional door lock made of mechanical. It has a number of spring-loaded pins that hold the door shut when no key is inserted into the hole. When the key is put into the doorknob the uneven edge pushes up onto the pins in the cylinder, fitting them in their proper position. Once the pins are in place, they allow for the bolt (also called the latch) to move forward, connecting to the door's interior.

The bolt extends out of the cylinder, and into the box, through a hole is then drilled into the door frame. The box is designed to fit the bolt tightly and ensure that it cannot be easily pulled open. A clip spring holds the bolt retracted when the door is closed. When you turn the handle, a spindle is engineered to rotate inside the cylinder. Once it's completed rotating the slanted side of the bolt is retracted into the door frame. The bolt rests on the cut-out portion of the doorframe, and locks the door until you are required to reopen it.

A faceplate is a metallic plate that attaches to the interior of your door, either side of the deadbolt hole. Its purpose is to shield the locking mechanism from damage caused by your knob's continual removal and insertion. Are you installing a new lock? Make sure that the faceplate is aligned with the hole on your door frame. Also, ensure that the faceplate is secured to the faceplate and the bore of the latch.

When replacing a lock on a door make sure that the deadbolt is seated correctly by sliding it into the the strike plate. After you're done then screw the strike plate and core of the new lock into the hole. Be careful not to over-tighten, as this can cause damage to the latch and prevent it from fitting into its groove in a proper way. window lock replacement can test your new lock by turning the key until it is locked position. If you notice any problems like a squealing deadbolt or loose latches, it's best to replace the old lock with a brand-new one.

The Faceplate

A faceplate is a large flat plate that attaches to the headstock of a lathe to hold the workpiece. It has a number of screw holes that are drilled through it, where the screw thread is inserted from the back and is inserted into the wood. A faceplate can be used to support various designs, but they must be positioned, fixed and balanced that aren't simple tasks if compared to the simplicity of using the tool chuck.

A typical faceplate comes with a number mounting holes. In this instance three holes are located at 120Adeg intervals to receive the screws for mounting in FIGURE. 2. The screw holes are made by an insert that can be interchanged or directly into the body of the faceplate. The intermediate part of the faceplate has a stepped area that provides an index mark to identify a specific place on the blank workpiece.

The stepping zone has been designed to be resistant to abrasion so that the fastener won't cause damage to the chisel used to cut it. The surface of the body of the faceplate is different properties from that of the surrounding region. Machining into this area alerts the turner of possible impending contact with a fastener and gives the turner enough time to react.

Screws used to secure a faceplate in place should be of a size that seats within the screw hole area with just a small amount of free play. There should be no space left behind the screw after it is tightened onto the glue block, as this could allow the block to move during the turning. A screw with a greater gauge will also sit more securely into the faceplate. The screw should pass through the center of the screw hole to avoid the possibility of the screw head coming into contact with a workpiece.

The Strike Plate

The strike plate is one of the most important parts of your door lock. The strike plate is what keeps the bolt from sliding when you shut the door. The strike plate helps to reinforce the lock and stops intruders breaking in using force against the jamb and latch.

A strike plate is a heavy metal plate that is positioned in the doorjamb, the vertical portion of the frame. It has a hole through which the deadbolt or latch can be inserted. When the cylinder is turned, the bolt is released from the strike plate into doorjamb, and it stays closed.


There are many different kinds of strike plates depending on the requirements of your. If you need a strike plate to fit to your particular lock, it will be listed in the details of the product. However, the majority of strike plates are identical and can be used with the majority of standard locks and latches.

Most strike plates come with an ovular screw hole and a "C-shaped" piece that acts as a washer. They are often employed on doors with corner rounded edges. They are available in various sizes to match the door.

For additional security, you can choose strike plates with no lip and is created specifically for deadbolts. This is a good choice for areas that require to be secured quickly, like stairs. It's also a great option to secure the equipment or documents inside your home.

Installing a box strikeplate can increase the security of your doors. It gives more thickness to the strike plate and strengthens it. This makes it harder to get in through the deadbolt or latch and is usually required for commercial doors equipped with a security lock.

If your strike plate is misaligned with the latch bolt, try spraying it with a high-quality lock lubricant. If this doesn't work, then you'll have to adjust the strike plate by drilling new holes in the screw and widening the hole for the catch. It is best not to make many adjustments to the strike plate. Repeated and extreme adjustments could cause it to lose effectiveness.

The Deadbolt

A deadbolt is a steel bolt that binds the door to the doorjamb frame. A deadbolt lock differs from a spring latch found in doorknobs. Instead of being able to be loided with credit cards, or using professional tools such as latch slips, it can only be locked by keys, thumb-turns, or electronically. They are easier to use and require less maintenance. They also offer greater protection against forced entry techniques like kick-ins.

The bolt extends through a hole or socket inside the doorjamb that is strengthened by a strike plate for extra security. The bolt should be at a minimum of 1 inch long to make it difficult to pull off the door. It is also recommended to select deadbolts that have an ANSI rating, which indicates how secure the lock is.

In addition to securing the bolt, the strike plate holds the cylinder in place. There should be three holes that run along the bolt: one located in the middle connects the facepiece and cylinder. The two other holes are to the left and right of the central hole. The screws are inserted into these holes to connect the cylinder and bolt. The screws should be standard with the new deadbolt. Some locks have decorative covers that snap onto the facepieces. Follow the manufacturer's directions to ensure that these are properly installed.

Selecting the best lock for your home is taking into consideration your lifestyle and the security level you need. Single deadbolts with cylinders are the most traditional lock option and are available on a variety of exterior doors. Keyless deadbolts are more secure however they are difficult to operate. Smart deadbolts allow you to lock and unlock the bolt by voice commands or a mobile app.

A professional locksmith will assist you in determining which type of lock is appropriate for your home and will install or change the lock. Upgrading your front-door locking system is a cost-effective option to boost the security of your home. You can consider installing a double-cylinder, or reversible deadbolt on the side of your front door for an extra layer of security.

Homepage: https://www.repairmywindowsanddoors.co.uk/dover-window-lock-repairs-near-me/