Notes

These Are The Most Common Mistakes People Make With Replace Lock In Upvc Door
Replace Lock in UPVC Door

If you've got a upvc door lock that's not working properly, you must call a professional locksmith. They are quick, efficient, and will complete the task to a high standard.

Change the barrel lock of a Upvc barrel isn't that difficult to do. You just need to know the procedure and follow the steps below.

Take off the barrel lock.

uPVC doors and windows are popular in a variety of properties. They allow natural light to get into the home and be opened with ease using the right key. Switching the barrel of a lock on the uPVC door is a simple task that takes only five minutes. It's a quick fix if you've lost your keys, a tenant has left and not returned it, or the lock barrel is damaged.

You will need to remove the screws that hold the handles first. This is to remove the handles out of the way to allow you to access the barrel screw that locks them. You should not loosen the screws quickly since this could cause damage to the handles.

After the screws have been removed, find the screw that holds the barrel lock in position on the inside of your door. This screw stands out and is different in color from the other screws on the door. Using a Phillips screwdriver, remove the screw. Next, take the present key used to lock the lock and place it into the barrel. Turn it to the right as far as you can. This will let the barrel go and make it easier to open the door.

After you've loosen the screw it's time to break the support pins that hold the euro cylinder in place. You will need pliers that are strong or mole grips accomplish this. Grab the protruding part of the euro cylinder and bend it from side to the side and up and down. This will break the two support pins that are holding it in place.

Once the old cylinder is out, you are able to start the process of putting in the new one. To ensure that you get the right replacement, you need to first determine the cylinder's size. You can do this by measuring the distance between the middle of the circular keyhole and the middle of the square spindle. The measurement should be taken from the upper spindle.

Change the Cylinder

The euro cylinder is the principal locking mechanism of doors made of upvc. It is simple to replace and does not require a handyman or locksmith. If your lock doesn't have this security feature, you must replace it with one that has. They are very affordable and could save you money as well as inconvenience when your locks are affected by these security threats.

To begin you must open the door and stand in front of it so you can reach the screw for retaining the handle by hand or using a suitable tool. Then loosen it a bit perhaps one quarter turn to get the job started.

The cylinder should now be easily removed because the screw will stop holding it in place. The next step is to decide on the size of replacement cylinder you need. There are around 25 different sizes available. It is a good idea to take the old cylinder when you buy a new one so you can be certain it will fit.

If you're unsure of the size, measure from the center of the screw hole to the end of cylinder. This is the only way to be certain you're getting the right size cylinder for your Upvc doors.

Once you have the replacement cylinder, place it into your door in reverse to how you took out the old one. It may be a little tricky to align the lock cam, but this is usually just an issue with alignment and will be fixed eventually.

Now you will need to install the long securing screws. After that, you are able to test it to ensure that the cylinder is securely in the door. It is now time to reattach the handle to the door and test it again. If all is good, the cylinder lock on your Upvc door has been replaced and you should have added a second layer of security to your home.

Change the Handle

There are a variety of reasons the door handle or door knob may become loose. This can be due to wear and tear of the handle itself, or it could be due to the square spindle inside the handle becoming worn or loose due to excessive force or use. In this instance, the door handle needs to be replaced.

It is important that the door be propped open so it cannot close between taking the handle off and replacing it. Remove the screws from the inside surface of the handle plate with the help of a screwdriver. This will remove your handle from the plate. Be careful not to lose the screws as they'll need to be re-screwed back to their original position later.

Once the handles are removed you can now open the cylinder lock inside the door. The cylinder lock will be round or bulb-shaped, and is only used for multi-point locks for upvc and some aluminum doors. The process of changing the cylinder is similar to changing the handle, except that you'll have to remove the old cylinder off the door and replace it with a brand new one.

When selecting the replacement handle, it is important to think about the size. Be sure that the handle is of a similar size to the original one as it will have to be able to fit over the screws that hold the handle in place. A good place to start is to refer to the size matrix that will provide the standard sizes of replacement handles, as well as their keyhole center to handle plate distance.

It is also worth considering upgrading your upvc doors handles to higher security standards like the Sold Secure SS301 or 2* Kitemark set of security handles. This will enhance the security of your home and make it easier to operate your door. The price of these sets may be slightly more expensive but the extra peace of mind and added security is well worth it. To constantly push the handle of the door up and down to shut or open it is not something you would like to be doing.

Changing the Lock

The security of your uPVC lock could be a vulnerability for thieves. You might want to upgrade your uPVC door with a multipoint lock to increase the security. This could include a deadbolt and an open hook to ward off criminals. A professional locksmith can help you with this, however it is also possible to complete the job yourself. You will need several tools, but the process is quick and easy.


The first step is loosening the screws that secure the handle. Using a screwdriver, you can take the screws off and place them in a safe spot. You can then raise the handle and reveal the screw that is holding the cylinder. You can remove this screw and replace it with a new one. RepairMyWindowsAndDoors is important to ensure that the screw is the same size as the original. It must be aligned correctly with the barrel of the lock.

The process of changing the lock on your uPVC is a daunting task. You depend on it to secure your home, and an error could result in you not being able to unlock the door. If you know how to accomplish it, the procedure is relatively simple and is much less expensive than hiring a locksmith.

To change the lock on your uPVC door, you will need to access the inner faceplate of the lock. You'll need to look for the screws inside the door and the bolt that holds it outside the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.

It is possible to replace the lock on your uPVC door for several reasons. It could be due to a lost key, a tenant moved out but did not return keys, or you want to increase the security of your home.

Anyone with a basic level of DIY skills can alter the locking mechanism made of uPVC. If the lock is stuck, you will need to inspect the hinges in the mechanism. If the hinges are lubricated it should be an easy repair. If you are not confident that it will be a simple fix, consult a professional.

Read More: https://www.repairmywindowsanddoors.co.uk/croydon-window-lock-repairs-near-me/