Notes

Do You Think You're Suited For Doing Replace Door Lock? Check This Quiz
How to Replace Door Locks

The replacement of your door lock can be a difficult task. It is important to protect your home from burglars and to replace locks if you have an additional housemate or have let out your home.

Most new locks have been made to fit standard width doors. If your door is thicker you'll require a "thick-door" kit with longer screws and longer tail pieces for the deadbolt.

Remove the lock from the old one.

If you're switching the lock on your door, you need to remove the old lock from the door. This can be done with some simple tools, but make sure not to damage your door or frame. Using the right tools will save you money on future repairs.

Begin by taking out continue reading this that support the handle in place and then trim. You can use a screwdriver do this. After the screws have been removed, you can remove the trim. You will then be able to gain access to the screw that binds the handle and trim to the door. After you have removed the screw and lock cylinder and open handle.

If you're unable to turn your keys inside, it is an indication that the lock is failing. This is due to the tumblers wearing out and then stopping the movement upwards or downwards, causing the lock to stop working. You'll need to have the lock changed by a locksmith if this happens.

If you're ready to replace your deadbolt, start by taking off the screws that keep the faceplate in place. If the kit you purchased does not include new screws, then you can purchase them from the hardware store. If you are installing a mortise locking, you will also need to remove the screws that attach the external roseplate to the door. After taking off the screws, you can remove the plate and dead bolt.

Next, look for a pinhole in the interior handle trim. If you find a pinhole then insert a straightened safety-pin into it. You can also try a flat screwdriver against the slot or depression. This should release the handle and reveal screws that can be removed to take the entire lock case from the door.

Fitting the new lock

Installing a new lock could be done with ease regardless of whether you wish to replace your lock following an attack, or simply want to update your door's appearance. However, it's important to measure the door in order to make sure you buy a new lock that is the right size for your door. This is particularly important for deadbolt locks that must be a specific size to fit inside the strike pocket and bolt plate. Ask your local hardware store for advice when you're not sure what size to use.

If you're replacing a mortice, use the existing centrerail as a reference to locate the new mortise. Once you've marked the position of the lock, drill holes on the centre line which are the same width of the lock. After that, chisel the wood away until you have an area that is rectangular enough to accommodate the mortice lock. Place the lock in and then outline the faceplate with a marking blade. Mark and drill screwholes to fix the faceplate.

If you want to rekey locks, you can save money by purchasing a starter kit that includes keys that are re-keyable as well as a key blank. These kits can be purchased from a variety of online retailers as well as hardware and home improvement stores. They also come with a set of instructions to assist you in completing the task.

If you're renting, be sure to check your lease agreement before changing locks. It could require you to provide the landlord with keys to the new lock. If so, you might be required to take out the old lock and replace it with a new lock. You can purchase a basic lock from your nearest hardware store, or buy a smart lock that connects to the Wi-Fi of your home and allows you to lock and unlock your door from afar. Schlage Smart Lock is compatible with all levers and knobs. This lock can be connected to a smart home security hub to allow you to receive alerts when your door is unlocked or opened.

Installing a new lock

A damaged lock could pose a security risk, therefore it is important to replace it as fast as you can. The good news is that replacing a door lock is a quick and easy project that anyone can tackle. The first step is removing the lock that was previously used. The screws that hold the lock in place are removed and the lock is removed. You may require either a screwdriver or an Allen wrench depending on the type of lock you own. Save all the components of the old lock and store them in a safe place.

Then, you can install the new lock into the door. The majority of kits come with an image of a cardboard template that illustrates how the lock will fit on the door. If the template does not match your door, you can use a pencil to trace around it, or a chisel for extra material removal. Be sure that the inside latch plate aligns with the mortise opening once the new lock has been installed.

Be cautious not to over tighten the lock when installing it. This can cause the lock to crack or even break. If you have a lock keyed, ensure that the spindle is aligned with the knob's hole. If it isn't you can make use of a screwdriver to push the spindle into the lock and into the knob.

After you have completed installing the new lock, you are now able to put in the decorative base plate that is included with it. If the lock doesn't come with a base plate, you can purchase one that matches the hardware.

The last step is to test the lock to ensure that it functions. You can do this by inserting the key into the lock and turning it until you are sure that it opens. If it fails then you must contact a locksmith.


Rekeying your locks with an expert can help prevent break-ins. This involves changing the internal lock tumblers to make it unreceptive to the keys you have previously used. This will ensure that your home is secure and give you peace of mind.

Testing the new lock

When you are installing a new lock you need to ensure that it operates as intended. This is why it's crucial to follow the guidelines carefully. You may not be able open your door if don't. If you're not sure of what to do, you can call a professional locksmith for assistance. A locksmith can also offer guidance on the best locks for your home.

If you are having difficulty opening your lock, there could be an issue with the handle or latch. You can either lubricate your latch with graphite, or spray it with WD-40. In some cases it can fix the problem. However, you may have to replace the latch completely if it's no longer working correctly.

The lock may have been installed incorrectly. The handle clip inside the door is often broken or missing from the new lock. In this situation it is recommended to grab the handle from the inside, and insert the new clip made of plastic. The handle is then connected to the lock, and the lock will be tested.

It is important to test the keypad after you've changed your lock to make sure it works correctly. You can test the keypad by inserting it and turning it. If the keypad works correctly, your door will be able to open and lock.

Examine the deadbolt to be sure it's functioning properly. If it's not, you should take the latch off and remove the Phillips head screws on the side of the door to open it. Replace the old deadbolt with the new one. Orient and load the deadbolt lock properly.

Another way to test the new lock is to perform the spindle test, which can be performed by inserting a screwdriver into the spindle. This test should always be carried out prior to reinstalling a lock to avoid any mistakes.

Here's my website: https://www.repairmywindowsanddoors.co.uk/birmingham-window-lock-repairs-near-me/