Notes

All-Inclusive Guide To Lock For Double Glazed Door
How to Choose a Smart Lock For Double Glazed Door

If you're looking for an intelligent lock for double doors, it's important to select one that satisfies high security standards. This includes being SS312 diamond approved or at a minimum Kitemarked TS007 3-Star that prevents locking snapping.

Ensure your doors are prepped with bore holes prior to choosing a smart lock. It is possible that you will need to install hinge bolts or some other additional security measure if you don't.

uPVC Door Locks

Most uPVC doors come with the euro cylinder lock that sits within the handle and connects to a multi-lock system in the door frame. The problem with many older or cheaper uPVC doors is that lock can easily be'snapped', rendering the multi-lock system ineffective and allowing intruders access into your home. A higher-quality uPVC door should use an anti-snap eurocylinder that is considerably more secure and impossible to alter.

Multipoint locks are a popular choice for uPVC door as they provide more security than the single cylinder. They typically have a longer appearance and are secured at multiple points along the door and frame to stop burglars from getting access to the unlocked side of the door.

When choosing a multipoint lock for your uPVC door, be sure that it's approved to the highest security standards. The most secure locks are certified to SS312 Diamond or at the very least Kitemarked to the TS007 3 Star standard. Both of these standards have tests to protect against lock snapping.

Maintaining your uPVC door locks lubricated by a product such as WD40 will extend their life and prevent the locking mechanism from becoming stiff or making the handle struggle when being used. This could indicate that there is a problem with the springs inside that will require replacement or an indication that you are using excessive force when locking the door since it could damage the mechanism.

It is recommended that if you have to replace uPVC locks you contact an expert locksmith who is specialized in uPVC replacement locks. They can help you decide which lock is best for your door, and provide you a price quote. They can also replace your handles and repair any damaged panels if required.

A professional uPVC locksmith will usually charge between PS35 and PS50 to replace your uPVC door locks. They'll provide a full service that is quick efficient, and completed to the highest standard. They will charge an additional fee for rekeying the locks or board windows that have been broken into.

uPVC Euro Cylinder Locks

Cylinder locks (also called door barrels) are found in uPVC doors and connect to the multi point locking system inside the door frame. They are also utilized in internal glazed doors and conservatories. These locks provide a good level of security, but can be vulnerable to attacks such as bumping and snapping locks. It is therefore essential to secure your uPVC door before going to bed or leaving your property.

There are many different cylinder locks on the market, and it's crucial to choose which best suits your needs prior to purchasing. For www.repairmywindowsanddoors.co.uk , you must consider how often you lock your uPVC door, and if you'd like a keyed-along system in which all your doors can be opened with the same key.


The most common type of cylinder lock is the euro cylinder, which can be found in the majority of uPVC doors. They are typically made of brass and are available in a variety of sizes to fit the majority of doors. The biggest models are usually used for the front and back door on larger homes.

When choosing a euro cylinder it is crucial to confirm that it has been tested to the appropriate kitemark standard. These are SS312 Diamond Approved or TS007 3 star and provide protection against drilling, Picking Bumping, Snapping and Picking.

Cylinder locks are available in various lengths and some have offset. This means that they will only be locked from the inside when they have been closed by turning the handle upwards. It is also essential to think about how much you are willing to spend on your uPVC door locks since the price will differ based on the level of security that you require and the features you would like for the new cylinder.

When replacing a lock on a cylinder, it is essential to measure the door to ensure that the new cylinder will fit in the right way. To do this you must locate the screw for the cylinder, which is usually a large-headed screw that is located close to the lower end of the cylinder and remove it. Next, locate the cylinder on the door and measure from the edge of the lock face to the center of the screw hole. This is your measurement A. Measure from the edge of your door to the middle, including any furniture. This is your measurement B. Make sure you compare A and B to be sure you have accurately measured.

uPVC Multipoint Locks

Multipoint locking systems are the most secure locks for uPVC and composite doors. These long strip locks are able to run across the length of your door and come with numerous hooks and bolts that secure the door when you pull the handle. They are more secure for your home, and come in different styles to fit every type of door and style. uPVC multipoint locks are the kind of lock you will find on the majority of new uPVC doors, as well as on the majority of timber and composite doors.

Unlike Euro Cylinder locks which are susceptible to snapping locks, the multipoint lock is designed to stop this type of attack. This is due to the locking points on a multipoint lock are joined with a steel bar, which stops the rollers and hooks from separating without taking the key off the cylinder.

The majority of new uPVC and composite doors will feature an anti-snap multipoint locking installed as standard, but If you're worried that yours might not be, it's worth having the lock checked by a local locksmith. You can tell the lock by opening the door and then looking at the metallic strip that runs the length of the door. The most commonly used manufacturers are ERA, Avocet Fuhr, or Mila.

You'll need to employ a lever lever to the lock or turn the key a number of times to engage the locking points, this is known as winding up the lock. After all locking points have been engaged then you can use the handle to open and close the doors, and the key deadlocks it. This releases the deadbolt that is located in the central gearbox.

When it comes time to replace your uPVC or composite front door lock it's recommended to purchase from a reputable firm that specialises in windows and doors, as the locks on these products play a significant part in protecting your home and your family. If the locks and security of your new doors don't meet the requirements buying a low-cost multipoint lock could be a false economic decision. This will not only put your family in danger, but also affect the cost of insurance.

uPVC Rim Locks

There are many types of uPVC rim locks. The basic rim lock is an lock that slams shut. As you close the door it automatically locks. You can also purchase one that you need to manually lock using the key before you leave the home. These locks aren't able to be pulled open and are among the most secure options you can fit to your door. These locks are suitable for timber or wooden doors on homes for domestic use as well as glass panelled doors for commercial buildings. You can even have these locks endorsed to the latest British standard BS3621, so that your insurance company can give you an additional discount on your insurance premium.

The multi-point locks found on uPVC and composite doors are extremely secure and offer the highest level of security for your home. These locks have multiple locking positions so that you aren't able to force the handle to turn when you try. They are designed to make it hard for burglars to gain access to the handles so they can't pull the latch from outside.

You can also have these locks with a mortice sashlock to provide additional security from burglars who break in through the window. These locks are ideal for doors leading into outbuildings or gardens as they provide extra security against thieves who break through windows to gain entry.

If you have a uPVC or composite door and are worried about the possibility of snapping cylinders, we can fit you an anti-snap lock that will stop this from happening. We install these on our composite doors and are the only uPVC installers in Belvedere that can offer this.

We can change your locks outside of hours as we have a mobile vehicle that can come to your home. The locksmith cost for this is slightly higher than when we are working during the day but it is worth the added cost for the peace of mind and convenience of having your uPVC door locks changed outside of business hours.

Read More: https://www.repairmywindowsanddoors.co.uk/oldham-window-lock-repairs-near-me/