Notes

10 Quick Tips About Change Door Lock
Reasons to Change Door Lock

There are many reasons to replace your door lock, from upgrading your home's security to re-decorating your entrance. You might need to change locks if your key gets stuck or is difficult to turn.

Change your lock is an easy project that even novice DIY homeowners can complete. Find the necessary materials to begin.

Take off the lock that was previously used.

Removing the lock that was in place before the door is a crucial step before installing the new one. This is particularly important in the event that you suspect someone else has access to your home. This is also a good idea following you've moved into a brand new house, had a break-in or a roommate moved in. The process is simpler than you might think and can be completed within a few minutes.

Begin by taking off the screws that secure the deadbolt faceplate on the frame of the door. To remove the faceplate, you will have to remove screws from both sides. This will allow you to see what is behind it and will give you a better idea of how to proceed in the next steps.

After removing the old faceplate you must take off the bolt as well as the strike plate and strike plate. Use a screwdriver or a wrench to loosen the bolt and take it out of the hole in the door. If the bolt is rusted, you may have to use a chisel and hit it. When using a chisel to remove the bolt, make sure to not to damage the door frame.

Before you take out the lock that was previously in use, make sure that the new deadbolt and doorknob will fit in the existing holes on the door. Most hardware stores and big box stores carry several different types of locks and will help you find the right one for your requirements. If the lock you bought does not match your door, take it back and seek assistance.

Find small dents or depressions in the handle and around the trim as you take off the lock. If you find them, use straightened safety pins or a flat screwdriver to release the handle.

After you have removed the screw from the handle, you can begin removing the knob. To do this, locate the set screw at the knob's base and loosen it. Then, you'll need to remove the knob from the spindle. Finally, carefully remove the spindle from the door.

Install the new lock

It's a good idea to change the locks on your doors periodically, especially if you have had a break-in. Change the lock is an affordable, simple and effective method to ensure that your home is secure. With a screwdriver, and a few simple instructions the majority of people can do it by themselves. Depending on your situation you may be interested in learning how to rekey a door lock so that only you own the key.

To begin the process, you must purchase a new lock that matches the keyway of your current lock. Many locksmiths will change the lock's key at an additional cost but you can save money by doing it yourself. RepairMyWindowsAndDoors can purchase a brand new lock at a hardware store or online. A standard deadbolt will usually fit on all doors however, you'll have to measure the size of your door to make sure that it's a good fit.

Your new lock will often include a template that shows how to install it on the door. You can use this as a guide when drilling the hole, which is a lot easier than measuring every time. If the template does not align with your hole, you can take it back to the shop and request a replacement.

When you install the new lock, you must be sure to place it on the right side of the door. Verify the latch. It should be marked with "up" or something similar. Make sure the latch is seated correctly within the latch plate then secure it with the screws supplied.

When replacing the knob lock be sure to be aware of its handing. Some knob locks are right-handed. If you're not paying attention, the knob could be installed on the wrong side of your door, which will prevent it from being locked from the outside or inside.

After you've finished, you should test the new lock to make sure it's working. You should be able to lock and unlock the door using keys from the inside as well as from the outside. If you're not happy with the outcome, you can call a locksmith to fix it.

Test the lock


A door lock that won't unlock is a hassle, it can also put your family's security at risk. It's not difficult to fix most problems with door locks by performing some troubleshooting and lubrication. First, ensure that your key is correctly cut and that the lock isn't soiled or loose. If this doesn't fix the issue, try to lubricate the door lock actuator with powdered graphite or a silicone-based oil.

Ensure that the doorlock switch, wiring harnesses, and actuator connectors are all working properly. Refer to the wiring diagram or manual to determine the color code and function of each door lock switch wire. Then, test the wires using a light or digital meter to see whether the door lock's actuator is receiving power and ground when the switches are turned on. If you can see voltage toggles with each switch this means that the switches are in good shape and the actuator will need replacing.

If the switch seems to be working but the actuator does not move when you turn it, there could be a problem with the cylinder. The actuator cylinder has spring-loaded pins that keep the cylinder from moving until a key is inserted and it pushes the pins up to match the key's height at the point of entry. Then, the cylinder to rotate and let the lock body open which allows the handle to latch.

If the door lock actuator is still not working, you can remove it with a small screwdriver. It is necessary to release the bolt that locks it first and then take off the plastic cover which holds the electrical connector. Then, disconnect the door lock actuator, and let it fall. Then, you should be able find and remove the two 10mm bolts holding the actuator in place. After the actuator has been removed, you can disconnect the black electrical connector.

Replace the key

If your deadbolt that is keyed or door knob isn't working, you'll have to reset it or replace it. It's not difficult to do this yourself and could save you some money. It is recommended to have an expert locksmith examine the locks for any problems prior to beginning. This will give you peace of mind that your home is safe and safe.

To begin, remove the faceplate on the outside from the doorknob or deadbolt. If there are screws holding the faceplate, use a screwdriver and remove it. Then, use a flat head screwdriver to take off the interior faceplate. After you have removed the faceplate, you can remove the bolt and screw from the lock cylinder.

A locksmith can determine whether you require a replacement or rekey the lock. They can also give you advice on the best security measures for your home. They can also make the necessary adjustments to your door and frame to ensure the perfect fit. They will also offer an assurance on their work.

You must purchase a new lock key before you can reset it. It is crucial to use the right key inside the lock. A key that is not the right size may cause damage to the internal mechanism of a lock and hinder it from functioning. Insert the key into the lock to verify its size. If the key sits completely against the plug then it's the correct size. If the pins protrude out from the top of the plug, they're too long.

There are a variety of reasons you might want to replace your door lock, including:

Rekeying locks is an option that is less expensive than replacing it if you're moving into the home of a previous owner or if keys have gone missing. It is also less invasive than a complete replacement. Rekeying a lock that is already in use may not be possible in certain situations. If the lock has been damaged or repeatedly jammed, for instance, it may be the right time to replace it.

Website: https://www.repairmywindowsanddoors.co.uk/birmingham-window-lock-repairs-near-me/