Notes

12 Companies Leading The Way In Upvc Window Replacement Hinges
Choosing Upvc Window Replacement Hinges

It's not as difficult as it may appear to select and install Upvc replacement hinges. Make sure the arrows on the hinges are facing the correct direction and determine the thickness of the hinge arms on the frame opening (13mm or17mm).

There are a variety of different kinds of hinges, each having their own unique features. This article will discuss some of the most commonly used uPVC hinges and their advantages.

Egress/Easy Clean Hinge

These windows are an excellent choice for replacing or upgrading your fire escape window since they open up to a full 90-degree angle. They can also be removed to an easy clean position so that you can easily access the exterior of windows to clean them without the need to climb a ladder or lean over at angles that could be dangerous.

These heavy duty egress hinges are manufactured by Yale, one of the most well-known and respected home security brands available today. They can be used with all types of uPVC side-hung windows. repairmywindowsanddoors.co.uk can be moved into the easy-to-clean position by pressing in an unassuming button, and then moving the window sash to one side. Once closed, the window sash will be returned to its original position.

Both 13mm and 17mm are both available. Depending on the size of your existing window we recommend using our Egress Selection Guide to determine which product is best for your needs.

The hinges are designed to be used in conjunction with a standard side-hung frame that is made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes opening the windows simpler and less likely of accidental closing during high winds. They have been tested for more than 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

With no buttons or catches the Nico Egress Easy Clean Friction Hinge is easy to use and provides a convenient solution for emergency egress and secure cleaning. Press the hinge retention clip located in the inner corner of the bottom corner. This will open the top and bottom catches which will allow you to move the sash back into the clean position. Once in the easy-clean position, close the window to return the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges are often referred to as "Easy Clean" hinges are used to replace side opening windows for egress (fire safety) reasons. These hinges permit a larger opening in the event of a fire. This type of hinge is a legal requirement in any habitable room that has a window, as stipulated by building regulations.

The windows feature the benefit of a friction stop that allows them to open at 90 degrees. They also let the opening sash slide across the glass when it's opened, allowing for easy cleaning without having to use ladders. The hinges have no fiddly buttons or catches, and are operated by a simple, safe lever that can be accessed from the inside of your home.

The hinges are manufactured in the UK by Cotswold and come complete with a child safety limiter for use throughout the day which can be turned off by a hidden button, giving you peace of thought that your children will not accidentally open the window too far. They are available in 13mm and 17mm stack heights.

To order these hinges simply take a measurement of the length of your current side hung window hinge that fixes to the frame (see the guidelines for measuring your upvc window hinges). Select the proper size hinge from the options below.

It is important to note that this measurement is taken from the hinge's part that connects to the frame and not the sash. The actual length of the hinge could be shorter or longer depending on the way your old windows were manufactured. When choosing the width of the hinge most frames made of upvc will have the 13mm stack height however if your original window frame has 17mm, you should select this option. Alternatively you can fit the 4mm packer to make up the difference. All the hinges are supplied with two hands (1 left and 1 right). Screws are not included with the hinges. If needed, they can be purchased separately. Our upvc window repair screws are recommended. These screws are designed to improve your hinges' performance and allow them to operate efficiently for a longer. They feature a less friction design, and an improved weather seal that is fitted with a new nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open a window completely. These child safety friction hinges are a great solution to this issue. They can be used in situations where ventilation is needed but escaping or cleaning a fire is not possible. They function by limiting the amount the sash can open, and allow for the to override this restriction by pressing the push of a button. They are available in 13mm or 17mm stack heights. They are suitable for both top and side hung windows.


The Nico Restricted Egress Friction Hinges blend the advantages of a standard restrictor and a fire escape pivot to provide a simple but efficient way to meet building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is offered as a pair of hinges where one hinge is restricted egress and the second is unrestricted allowing one of these to be installed to the bottom of the sash while the other hinge is installed to the top.

These uPVC restricting hinges have been tested to BS6375, part 2 and are designed for use on a window that isn't able to be fully opened, like a small child's bedroom. The mechanism restricts the amount the sash can open to the safety level of 100mm and re-engages when the window is closed.

Like the other kinds of uPVC friction hinges that are available, these hinges can be used on all types of windows and are ideal for those difficult to access windows above ground level, three-storey flats or those that typically require a ladder to reach them. They can be paired with our range of security features like hinge guard protection plates or dog bolts for PAS 24 performance.

When replacing a window hinge it is important to measure the length of the existing hinge so you can purchase replacements that are similar in size. This can be accomplished by looking through the image gallery of the hinge and then deciding where you want it positioned. The hinges that hang from the top can only be placed on one side, while the side-hung hinges can only be placed on one side.

Standard Hinge

A standard hinge uses metal-to-metal contacts and has no additional parts to reduce friction. It is available in a variety of finishes, and is fire rated. For a quick way to determine the radius of your hinge, lay it flat and align a dime and quarter in two corners. If the quarter fits better then the corner should be turned to 5/8 inches.

The right hinge can make or ruin the appearance of your door. It's essential to match the finish and style of your door to the hinges to create a seamless design that is both functional and visually appealing.

Here's my website: https://www.repairmywindowsanddoors.co.uk/southampton-window-hinge-repairs-near-me/