Notes

It's True That The Most Common Upvc Window Replacement Hinges Debate It's Not As Black And White As You May Think
Choosing Upvc Window Replacement Hinges

It's not as difficult as it may seem to choose and fit upvc replacement hinges. Check that the arrows on the hinges face the right way and measure the thickness of the hinge arms on the opening frame (13mm or 17mm).

There are a few different kinds of hinges that you can pick from, each with distinct features. This article will review some of the most common uPVC hinges and their benefits.

Egress/Easy Clean Hinge

They are an excellent choice for replacing or upgrading a fire escape safety window, as they open at a full 90-degree angle. They can be removed in an easy-cleaning position that allows you to see the outside of windows without having to climb ladders or lean over dangerous angles.

These heavy-duty egress hinges are manufactured by Yale which is among the most well-known and reliable home security brands on the market today. These hinges can be used with any type of uPVC side-hung window. By pressing a tiny button, the window sash is slid to the side, and then into the clean position. After closing, the sash will automatically reset to its original position.

They are available in both 13mm and 17mm stack heights. Depending on the size of your existing window, we recommend using our Egress Selection Guide to determine which product is best for your needs.

These hinges can be fitted to traditional side-hung frames made from uPVC, or aluminium. They are fitted with an easy-to-use friction screw to adjust the amount of resistance generated. This makes opening the windows simpler and less likely of closing the window accidentally during high winds. They have been tested to over 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to operate and does not have buttons or catches. It provides a convenient and safe solution for emergency exit and cleaning. First, open the door to the egress (full opening) position, and then press the hinge retaining clip that is located on the inside of the bottom corner. This will release both the top and bottom catches allowing you move the sash into the clean position. Close the window when you have the sash in an easy-cleaning position. This will reset the hinges to their exit positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as "Easy Clean") are used to replace windows with side openings for fire safety reasons. These hinges allow for more space in the event of a fire. Building regulations require that this kind of hinge must be installed in any room that has windows.


They have an exclusive friction stopper that allows the window to be opened to 90 degrees and also allows the opening sash to slide across the glass when it is open to allow easy cleaning of the outside of the glass, without having to use ladders. The hinges are easy to operate and don't have complicated buttons or catch mechanisms. They can be operated from inside of the house with an easy, safe lever.

The hinges are made in the UK by Cotswold and come complete with a child safety restrictor for day-to-day use that can be overridden by a hidden button, providing you with peace of mind that your children won't accidentally open the window too far. They are available in 13mm or 17mm stack heights.

To purchase these hinges, measure the length of your current side-hung window hinge which fixes to the frame (see the guidelines for measuring your upvc window hinges). Then, select the appropriate size hinge from the choices below.

Please note that the measurement is taken from the part that fixes to the frame not the sash. The actual hinge length may be slightly shorter or longer based on the manufacture of your old windows. Also, when selecting the width of your hinge most windows made of upvc will have a 13mm stack height but should your old frame have 17mm then choose the option for this. Alternatively window hinges replacement can fit the 4mm packer to make up the difference. The hinges are available in two different directions (1 left and one right). Screws aren't included with the hinges. They can be purchased separately if you require. We recommend using our Upvc window hinge repair screws. These screws are designed to improve your hinges' performance and allow them to operate effortlessly for a longer. They have a lower friction design and a better weather seal, with a brand new nylon reducer end cap.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. These child safety friction hinges are a great way to solve this problem. They can be used when ventilation is needed but escaping or cleaning the flame is not feasible. They restrict the amount of opening the sash, and permit the override of this restriction by pressing the button. They work with both side- and top-hung windows and come in 17mm and 13mm stack heights.

The Nico Restricted Egress Friction Hinges combine the features of both the standard restrictor, as well as a fire escape pivot to provide a simple but efficient way to meet building regulations. It is available in 13mm and 17mm stack heights and can be used for both top and side opening uPVC window. It is available as a pair of hinges where one hinge is the restricted egress and the other unrestricted, allowing one hinge to be installed at the lower part of the sash, while the other is fitted to the top.

These uPVC restrictive hinges have been tested to BS6375 part 2. They are intended to be used on windows that cannot be opened fully like a small child's bedroom. The mechanism restricts how far the sash opens to a safe position of 100mm, and re-engages once the window is shut.

These uPVC friction-type hinges can be used with all types of windows. They are especially useful for windows that are hard to reach, such as those in three-storey homes or ones that require ladders. These can be enhanced with our security enhancements, such as hinge guard protection plate or dog bolts, to achieve PAS 24 performance.

When replacing a window hinge, it is important to determine the length of the current hinge so that you can order replacements that match in size. The easiest method to do this is to look at the hinge in the image gallery and working out the location you would like it to be positioned. Top hung hinges can be restricted on both sides, while side-hung hinges are only restricted on one side.

Standard Hinge

A standard hinge has metal-to-metal contacts and has no additional parts to reduce friction. It is available in many finishes and has an NFPA-certified fire rating. For a quick way to determine the radius of your hinge, lay it flat and align the quarter and dime in two corners. If the quarter is more snug, then the corner should be round to 5/8 inches.

Choosing the right type of hinge can determine the success or failure of the appearance of your door. It's crucial to match the finish and style of your door to the hinges to create a seamless appearance that is both practical and visually appealing.

Homepage: https://www.repairmywindowsanddoors.co.uk/ilford-window-hinge-repairs-near-me/