Notes

12 Companies Leading The Way In Upvc Window Replacement Hinges
Choosing Upvc Window Replacement Hinges

It's not as difficult as it could appear to choose and install the replacement hinges made of upvc. It is crucial to ensure that the arrows on the hinges is facing the correct way and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are several different types of hinges, each with its distinct characteristics. This article will focus on the most common types of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

These windows are an excellent choice for replacing or upgrading your fire escape window since they open up to a full 90 degree angle. They can also be lowered to an 'easy clean' position so that you can easily access the outside of windows to clean them without climbing on a ladder or lean over at angles that could be dangerous.

These heavy duty egress hinges are made by Yale one of the most well-known and reliable home security brands available today. They can be used with all types of uPVC side-hung windows. By pressing a tiny button, the window sash will be slid to the side and into the clean position. When the window is closed, the sash will be returned to its original position.

Both 13mm and 17mm sizes are available. Based on the size of your existing window, we suggest using our Egress Selection Guide to determine the best product for you.

These hinges can be used with conventional side-hung frames made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the risk of an accidental closure during strong winds. They have been tested for more than 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to use and does not have buttons or catch. It offers a convenient and safe solution for emergency exits and cleaning. First, open the window to the egress (full opening) position and then press the hinge retaining clip on the inner side of the bottom corner. This will release both the top and bottom catches which will allow you to move the sash towards the clean position. Close the window once you have the sash in the easy-cleaning position. This will set the hinges back to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace side-opening windows for escape (fire safety) reasons. These hinges permit a larger opening in the event of fire. www.repairmywindowsanddoors.co.uk of hinge is legal in any habitable room that has windows, as stipulated by building regulations.

They have an exclusive friction stay that opens the window to an angle of 90 degrees. It also allows the opening sash to slide across the glass when it is open for easy cleaning of the exterior side of the glass without having to use ladders. The hinges are simple to operate and don't have complicated buttons or catchers. They can be operated from the inside of the house using an easy, safe lever.

The hinges are manufactured in the UK by Cotswold and come with a child safety restrictor for day to day use which can be turned off with a hidden button giving you peace of thought that your children won't accidentally open the door too far. They are available in 13mm and 17mm stack heights.


Find the length of the side-hung window hinge that is attached to the frame. (See the guide on measuring upvc window hinges). Choose the right size hinge below.

Please note that this measurement is taken from the hinge's point that attaches to the frame, not the sash. The actual length of the hinge can be longer or shorter depending on how your windows were originally made. When choosing the width of your hinge, most upvc windows will fit a 13mm stack height but should your old frame is 17mm wide, you should select the option for this. You can also install the 4mm packer to make up the difference. All the hinges are supplied with two hands (1 left and 1 right). Screws aren't included with the hinges. They can be purchased separately if needed. Our upvc window repair screws are recommended. These screws are designed to improve your hinges' performance and allow them to operate effortlessly for a longer. They have a lower friction design and an improved weather seal with a new nylon reducer end cap.

Restricted Hinge

Standard hinges can make it difficult to open a window completely. The restricted child safety friction hinges are a solution to this issue and are a great solution when ventilation is needed but access for cleaning or escape in the case of fire isn't possible. They work by restricting the amount the sash can open, and allow for the control of this limitation with the push of a button. They are available in 13mm or 17mm stack heights and can be used for top and side-hung windows.

The Nico Restricted Egress Hinges combine the features of both a standard restrictor and an escape pivot to offer a simple and efficient way to meet building regulations. It is available in 13mm and 17mm stack heights and is suitable for both top and side opening uPVC window. It is supplied in a pair, where one hinge is restricted egress and the other unrestricted allowing one of these to be placed on the lower part of the sash, while the other hinge is installed to the top.

These uPVC hinges are specifically designed to be used on windows that cannot be fully opened, like bedrooms for children. The mechanism limits the amount the sash can open up to a safety position of 100mm and re-engages when the window is closed.

These uPVC friction-type hinges can be used on all kinds of windows. They are especially useful for windows that are hard to reach, like those in three-storey houses or those that require the use of a ladder. These can be enhanced by our security enhancements, like hinge guards, or dog bolts to attain PAS 24 performance.

When replacing a window hinge it is essential to measure the length of the current hinge so you can order replacements that match in size. The most efficient method to do this is by viewing the hinge in the gallery and working out the best place for it to be placed. Top hung hinges can be restricted on both sides, while side-hung hinges are only restricted to one side.

Standard Hinge

Standard hinges have metal-to-metal contacts and do not require any additional components to reduce friction. It is available in many finishes and has an NFPA-certified fire rating. For a quick way to determine the radius of your hinge, lay it flat and then line up a dime and quarter in two corners. If the quarter fits better than the corner, then it should be turned to 5/8 inches.

The right hinge can make or break the appearance of your door. It's important to match the style and finish of your door to the hinges to create a unified look that's both functional and visually appealing.

Here's my website: https://www.repairmywindowsanddoors.co.uk/bristol-window-hinge-repairs-near-me/