Notes

12 Facts About Patio Door Repairs That Will Get You Thinking About The Cooler Water Cooler
Tilt and Slide Patio Door Repairs

A tilt and slide patio door that works well brings fresh air and light into your home, and allows for effortless transition from indoors to outside. Modern aluminium doors offer toughness and durability along with thermal stability and a range of glass options that offer an array of styles.

One of the most frequent problems for sliding doors is dirty tracks and rollers. Regularly cleaning and lubricating moving parts can keep your sliding door in good working in good working order.

Track and Roller Replacement

The track and the rollers are vital for sliding doors to function. They are located in the bottom of the door's aluminum panel and sit on a raised track that allows them to slide open and close. Over time, dirt and dust in the tracks can cause them to become blocked. This can lead to the rollers becoming damaged. Cleaning your patio door and well-lubricated can help prevent these problems.

Unless your track is severely bent, it's usually possible to repair the track and rollers without completely taking the door off. Find a partner and tilt the panel towards you to lift it off the bottom track (Photo 3). It might take some effort to lift the panel since they can be heavy. After removing the panel, lay it flat on sawhorses and inspect the rollers. Replace them if damaged by a new roller set. You can adjust the height of rollers by turning the adjustment screws which are usually located in slots that are located along the edges of the panel.

If the rollers look in good shape they might just need to be cleaned and lubricated. Remove the rollers with a screwdriver and clean them using denatured ethanol. This will eliminate any dirt and grime that has accumulated that may be creating resistance. Then, gently place each roller back into its slot and completely retract it by using the adjustment screw. Then, lubricate the wheels using a silicone spray. This type of lubricant doesn't collect dirt like petroleum-based products and will help your door glide smoothly.

After cleaning the rollers and installing them, you can put the door back in place and test it to ensure the track is aligned with the rollers, and that the doors are sliding smoothly. Contact a local dealer if require assistance. Keep your doors clean and well lubricated to prolong their life and minimize the need for repair. repair patio door lock Repair My Windows And Doors recommend a lubricant made of silicone since it does not attract dirt like WD-40. It is recommended to lubricate your rollers and tracks at least once a month.

Replace insect screens

Sliding patio doors are great for maximising the floor area, allowing for airflow and allowing beautiful panoramic views. However, they can be problematic if their mechanism stops working or is not functioning properly. Luckily, most problems with sliding screen doors can be easily resolved. Dirty rollers due to debris in the track or a wrinkled screen are typical causes however, you can fix them by following these easy steps.

If your screen is sagging or is wrinkling, first lay the frame down on an unfinished work surface. Then place a 1x4 board under each end to create an elongated bow in the middle. This will help to make the screen more rigid and straighten it.

Purchase a screen that is at least two inches larger in both directions than the frame's opening. You'll be able cut any excess. Then, use a spline roller tool to push the rubber spline end into the channel. Once you've completed this, it is time to roll in the rest of your spline.

Adjusting the Panel

The tilt and slide mechanism allows you to open the patio doors wider to let in more air and keeps your pets, children and other household members out. Despite the ease of the system, they tend to take more force than anticipated and over time, this causes increased friction, crooked tracks or misalignments which could cause the door to fail. The early detection of problems and minor adjustments can often solve these problems, reducing the cost of replacing hardware.

The first step to adjust the tilt and slide patio door is to take off the panel and set it on a flat surface. After removing the panels employ a screwdriver to take the plastic caps that are in the holes of each adjuster. Once the plastic hole caps are removed, you can use a long shafted screwdriver to force the adjuster out of its channel. Once the adjustable roller is removed from its channel, place it on an even surface and scrub it using rubbing alcohol or a stronger variant like denatured alcohol. This will eliminate any grime that may be causing resistance and allow the roller to retract easily into its channel after the process is completed.

When you are reinstalling a moveable panel, align it with the frame and then use the drill to drive the screws through the flange. The flange should be secured tightly to the door edge while ensuring that the flaps orient correctly. Once the movable panels are in place, apply silicone-based lubricant on the top track block connectors for the arm, the lead Bogie wheels and the slave Bogie wheels and replace the plastic hole cap.

Repeat the process on two additional movable panels to restore slide function and then put back the plastic flanges. Utilizing a plastic adhesive attach the jamb-side strip to the fixed panel. Reattach the handle once the glue is dry and test the smoothness of the process. If there are still issues, you can adjust the lead Bogie wheel again by getting it removed from its channel, cleaning it and installing it again with a small amount of silicone-based grease.

Charley Bar Installation

A patio door can be a practical way to let your pets into and out of the home, but it could also be a convenient entry point for burglars. Put a pin lock on your patio door or a charley bar to increase security. These locks provide a blend of security and convenience that is unparalleled by any other product available.

The Charley bars are an excellent option for sliding doors and can be easily installed at home. The charley bars can be placed in the middle of the door to avoid the patio door being jimmied with tools or objects like a hockey stick or Broom handle. The charley bars are made from polycarbonate tubes that have been molded in injection and extruded RPVC tubing that telescoping, making them durable and strong.

To install the charley bars, first verify that it's the right length for your door by measuring horizontally from the edge of the track for sliding doors to the sliding glass patio door. Mark the points using a pencil where the charley bars will be installed. Use an eighth-inch bit to drill holes into the wall jambs and frame of the patio doors, but be careful not to scratch the glass of the patio doors. Then, tighten the screws that came with the charley bars.


The charley bar is an excellent option for sliding glass patio doors as well as windows with sash. This simple security tool will keep your sliding patio doors secure and burglar-proof for a long time to be. It is made of injection-molded polycarbonate and has been tested to withstand over 400 pounds of pressure by Intertek. The charley bar is also locked with the key included. It is easy-to-install and stays out of the way when not being used. You can purchase the charley bar at most hardware stores. If you want a charley-bar that works, purchase it from an online retailer.

My Website: https://www.repairmywindowsanddoors.co.uk/ashford-patio-door-repairs-near-me/