Notes

Fitting a Cat Flap
It may seem difficult to put up the flap for your cat however, with the proper instructions, it's not too difficult. Decide how high you'd like your cat flap to be (normally, it is at belly height). Then, mark this area on the door and then use the template as a guide to drill.

If you have a young kitten hold the door open very slightly and gradually encourage it to go through. Reward the kitten every time it passes.

Measure the Door

A cat flap allows your pet to enter and exit your home at its convenience. This will help keep your cat healthy by making sure that it is getting exercise as well as being able to go back inside if stuck outside in bad weather, especially in winter. It can also reduce the amount of time you need to let it out or in and will also help keep your home safe by letting you know when it has gone out.


It is important to make sure that the cat flap is placed correctly to stop your pet from being forced through or escaping through it by other animals (e.g. dogs). It is essential to measure the height of your pet's belly as well as the entrance to your home in order to ensure that the flap is at the proper height. If your cat is a little larger or shorter than the normal, you can adjust the flap's position by moving it upwards or downwards by a small amount.

The next step is to use a spirit level to mark the centre of the door, where you will install the flap. Using the marking as a reference, use an jigsaw to cut the shape of the flap in the door. Once you have cut out the area, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes required.

The installation of a cat flap should not take more than two hours. The process is a bit more complicated if you are required to put it in the form of a uPVC door or a composite one. This is due to the fact that these doors come in different thicknesses, which can affect the way the holes are cut. This is why we always recommend hiring a professional to complete the work, particularly in the event that you've never worked with glass before.

Measure Your Cat

You will not have to spend hours of ignoring the pet's meow to be let in or out. This is particularly useful when you're at working all day and your cat is in the waiting room until you come home in any weather.

If you are planning to install a cat flap inside your door it is important that you determine the size of your cat prior to beginning the task. Although it might appear to be to be a simple task, it is important to get the measurement right or your pet will be unable to use.

First of all, make sure that your cat is relaxed and not stressed before you take the measurements. You'll need to keep your cat in a place in which they cannot move. Also, ensure that the measuring tape is straight and not bent against the body. Keeping the measuring tape or ruler against their body from the top of their head to the base of their tail will enable you to determine an precise measurement.

Once you have the measurement of your cat, it is time to take a look at the door and decide where to place the flap. The flap should be placed at the level of your cat's belly. This will allow them to pass through the door with minimal effort. This will also avoid the flap making quite a lot of noise when it opens and closes.

You must take into consideration the thickness of the uPVC or composite door, as well. While timber doors are all of the same thickness, uPVC and composite doors can be very different in their overall design, which can make fitting a cat flap more complicated as you will need to make sure that the hole you make is the proper size for your pet.

You can also use the template drawing included in the instructions to mark the location of the hole in the door. This will help you to see where the opening must be, and also to make sure that the template is correctly positioned on the door. It is also helpful to use a spirit-level to ensure that the template is perfectly against the door.

Cut the Flap

Before you can install your cat flap you must cut the door panel to make it large enough to accommodate it. This can be a daunting job, so it's recommended that you hire a professional to assist you if you do not have the expertise or experience. It is also recommended to read the instructions included with the cat flap kit to learn how to do this properly.

You can use the height of your cat's or kitten's stomach as a reference. In general, place the cat flap about 10-15 centimeters above the ground. This is the typical height of the cat's belly. This way your cat will be able to move through the flap without difficulty and will also make any other cats or curious neighbours an issue when trying to enter or leave.

Mark the position of the cat flap on the door using the pencil. If your kit has the template put it on top of the door. Utilize the markings on the template to drill holes in each corner. Then, you'll be able to cut the template and replace it with the cat flap.

You can install your cat flap yourself in a wood or uPVC door when you're confident using the Jigsaw. Ensure that you do not cut through any of the door mullions or vertical rails. You can use a jigsaw cut the panel into a square or a circle depending on the design of your cat flap. Take your time and don't try to make the jigsaw cut faster.

After the hole has been cut, carefully fit the cat flap into its new location and make sure that it is securely secured. If the flap is fitted with screw caps, push them onto the protruding bolts. Once cat flap install have been installed then sand the rough edges and then apply sealant to any gaps. This will block the entry of draughts into your home.

Fit the Flap

If you have a standard cat flap, you can try to encourage your pet to go through it by placing a small amount of cat food on the outside of the door. You can also try pushing the cat with sticks or your hand. Once your cat is used to walking through the flap it should be able to go in and out as it wishes, so you can let it in or out without to open the door to allow it in all day (and potentially in all weathers).

It is possible to install the flap inside the UPVC doors or glass door, but it may not be as simple as putting one in a wooden external door. This is due to the fact that UPVC doors and some types of glass doors do not have a uniform thickness. This can have a dramatic effect on how you cut the hole for the flap and could affect the way your flap is fitted correctly after it has been put in place.

The mounting kit may contain a template that outlines the best places to drill holes. If the kit does not come with a template, you can make one yourself. When cutting, it's important to not push the jigsaw to the point that you create a bigger hole than you need in your door.

Certain cat flaps come in circular shapes, which can be more difficult to install. If you have a circular flap, it's important to make sure the hole is in the right position on your door, because if it's not, the cat can't use it and may be stuck in the open all day (or even at night).

Certain models of cat flaps have locks that permit you to regulate when your cat comes in and goes. These can be very useful in the event that you are worried about your cat going out at night only to come back in due to the darkness, or if you're working all day. Certain locks can be used for entrance or exit, while others can be locked both ways. This is beneficial for older cats or sick cats who do not want to venture out in cold weather.

My Website: https://yamcode.com/cat-flap-double-glazing-12