Notes

Fitting a Cat Flap
Fitting a cat flap can be a bit daunting but it's simple by following the correct instructions. Determine how high you would like the cat flap (normally it's at the belly height). Note this on the door and then use the template provided as a guide to drill.

If you have a kitten who is still a baby then gently prop the door slightly open and encourage it to go through. Reward it when it goes through.

Measure the Door

A cat flap is a great way to let your pet move into and out of your home as it likes. This can help keep your cat healthy by making sure that it gets exercise as well as being able to get back inside if stuck outside in bad weather, especially in winter. This can reduce the time you allow your cat in or out, and keep your home safer by letting you know when it's gone.

However, it is important that the flap on your cat is fitted correctly to prevent your pet from escaping through it or be pushed through by any other animals (e.g. dogs). You should measure the height of your pet's belly and the height of the doorway at your home to make sure the flap is at the right height. If your cat is longer or taller than the average, you can alter the flap's height by moving it upwards or downwards by a small amount.

The next step is to make use of a spirit level to mark the centre of the door where you will be installing the flap. Then, using the markings as an indication, cut out the shape of your flap with the help of a jigsaw. After you have cut the area out, sand down the edges to create smooth surfaces. Drill any holes you need to.

Fitting a cat flap should not take longer than two hours. However, the process may be slightly more complicated in the event that you have to put it inside the door of a uPVC or composite door as these doors come in various thicknesses which can affect how the holes are cut and the type of door they are fixed to. This is the reason we recommend hiring an expert to do the work, particularly if you have never worked with glass before.

Measure Your Cat

You will not have to spend hours of ignoring the cat's meows to be allowed in or out. upvc door panels cat flap is particularly useful if you are at work most of the day and your cat is stuck inside waiting until you get home in all weathers.

It is crucial to measure your cat's measurements first before you begin the installation. It may seem like a simple task, but it's crucial to measure your cat correctly. In the event that you don't, your cat may find it difficult to use.

First, ensure that your cat is calm and not feeling anxious prior to taking the measurements. You will need to hold them in a manner that they cannot move and also ensure that the ruler or measuring tape is flat against their body and not bending in any place. Keeping the ruler or measuring tape against their body from their head to the bottom of their tail will allow you to make an exact measurement.

Once upvc door panel with cat flap have your cat's measurement, it's time to look at the door to decide where to place the flap. The flap should be placed at the level of your cat's belly. This will allow them to walk through the door without much effort. This will also prevent the flap from making lots of noise when it swings open and closed.

You must think about the thickness of the uPVC or composite door too. While timber doors are all of the same thickness, uPVC and composite doors are different in their overall construction and can make fitting a cat flap more complicated as you will need to ensure that the hole you cut is the right size for your pet.

It is also worthwhile looking through the instructions that come with the cat flap kit to locate an illustration template that can be used to mark out the location of the hole in the door. This will allow you to see the location where the opening should be and make sure that the template is correctly positioned on the door. It is also helpful to employ a spirit-level to ensure that the template is placed flush against the door.

Cut the Flap

You will need to cut a hole in the door panel to install your cat flap before you can install it. This is a difficult job and it is recommended to seek the help of a professional cat flap fitter for this job should you not have the skills or experience to do it yourself. It is also recommended to review the directions that come with the cat flap kit to learn how to do this correctly.

To do this, you have to measure the height of your cat's or kitten's belly and use this as a reference point. As a general rule put the flap about 10-15 centimeters above the ground. This is the typical height of the cat's belly. upvc door panels with cat flap can move through the flap comfortably and it will also give any other cats or curious neighbours difficult time trying to leave or enter.

Once you've determined the location where the cat flap needs to be placed, mark this position on the door with pencil. If your kit includes an outline, place it over the door. Utilize the markings on the template to drill holes in each corner. Then, you should be able cut out the shape of the template and replace it with your cat flap.


You can install your cat flap yourself in a wood or uPVC door If you're comfortable using the Jigsaw. Be sure to not cut through any of the door mullions or vertical rails. You can use a jigsaw to cut the panel into a square or a circle according to the design of your cat flap. Take your time, and don't try to force the jigsaw to cut faster.

After the hole has been cut, carefully place your cat flap into its new home. Make sure it's securely secured. If the flap is fitted with screw caps put them on the protruding bolts. Once the screws are in place, you can sand any rough edges of the cut then apply sealant around any gaps to ensure that there aren't any draughts entering into your home.

Fit the Flap

If you have a standard cat flap, you can try to encourage your pet to use it by placing a small amount cat food on the outside of the door. Alternatively you can try pushing the cat through with your hands or with a stick. Once your cat has become comfortable moving through the flap, it will be capable of walking through the flap whenever it wants. This allows you to let it in and out as it's wanted.

It is possible to install an animal flap into an UPVC door or glass door, but it might not be as simple as installing one inside a wooden exterior door. This is because UPVC doors and some types of glass doors do not have a uniform thickness. This could have a significant impact on how you cut out the flap's hole, and whether the flap will fit correctly after installation.

The mounting kit might include a template showing you where to drill holes. If the kit doesn't come with a template you can use a photocopier to make your own. It's important not to push the jigsaw too hard when cutting, so it doesn't make a larger than needed hole in your door.

Some cat flaps are available in circular designs, which are more difficult to put in. If you have a circular flap, it's essential to make sure the hole is in the right location on your door as in the event that it's not, the cat won't be able to use it and could be left outside all day (or even night).

Certain models of cat flaps have locks which let you manage when your cat comes and goes. This is useful if your pet is afraid of leaving in the dark, or coming back inside at night. They can also be useful if you work all day. Certain locks can be used to lock entrance or exit, while others can be locked both ways. This is beneficial for older cats or sick cats who aren't keen to venture out in cold weather.

Read More: https://lovewiki.faith/wiki/Cat_Flap_Installation_How_to_Fit_a_Cat_Flap_in_a_Door