Notes

Fitting a Cat Flap
It can be difficult to put up the flap for your cat, but with the right guidelines, it's not all that difficult. Firstly, determine how high you want the flap to be (on average, belly height). Note this on the door and then use the template included as a reference to drill.

If you have a kitten, or a young kitten hold the door slightly open and gradually push it to enter. Reward it when it goes through.

Measure the Door

A cat flap lets your pet to enter and exit your home at any time. This will keep your cat healthy since it will ensure it is exercising regularly and will also allow it to go back inside when it gets trapped outside during bad weather. This will cut down on the time you spend letting your cat in or out, and keep your home secure by letting you know when it has left.

It is crucial to ensure that the cat flap is set up correctly in order to prevent your pet from being forced through through it by other animals (e.g. dogs). It is essential to measure the height of your pet's belly as well as the entrance to your home to make sure that the flap is at the right height. You can alter the height of your flap if your cat is taller or less than average.

The next step is to use a spirit level to mark the center of the door where you will be installing the flap. Then, using the marks as a guideline, cut out the form of the flap with a jigsaw. After you've cut the door, sand the edges of the door to create smooth surfaces and drill any fixing holes required.

The process of fitting a cat flap isn't as difficult as you think and it should not take more than two hours to complete the entire task from start to completion. However, the process may be a little more complicated when you have to install it into the frame of a uPVC or composite door because these doors have a wide range of thicknesses that can affect the way the holes are cut and what they are fixed into. This is the reason we recommend calling an expert to do the task, especially when you've never dealt with glass before.

Measure Your Cat

You can avoid hours of listening to the pet's meow to be let in or out. This is especially helpful if your cat is trapped inside during the winter months while you are at work.

If you're planning to put a cat flap in your door, it is crucial to take measurements of your cat prior to attempting the task. It might seem like a simple task, but it is essential to measure your cat correctly. If not, your cat may have difficulty putting it in use.

First, ensure that more info is calm before you begin taking measurements. You'll need to put your cat in a place that they are unable to move. Also, make sure that the measuring tape is flat and not curved against the body. Keeping the measuring tape or ruler against their body from the top of their head to the bottom of their tail will allow you to make an accurate measurement.

Once you've figured out the measurements of your cat's body, it's time to take a look at the door and decide on where to place the flap. The best option is to position the flap on the highest point of your cat's stomach as this will help them to pass through it with minimal effort. This will also prevent the flap making lots of noise when it swings open and closed.

You should think about the thickness of the uPVC or composite door as well. While timber doors are all of a similar thickness, uPVC and composite doors may differ in their overall construction and this can make the installation of a cat flap more difficult because you must make sure the hole you cut is the correct size for your pet.

It is also worth reading through the directions included with the kit to locate an illustration template that can be used to determine the location of the hole inside the door. This will help you determine where the hole must be located and make sure that the template is positioned properly on the door. Utilizing a spirit level to ensure that the template is right against the door will also be extremely helpful.

Cut the Flap

Before you can put in your cat flap, you'll must cut the door panel in order to create a space large enough to accommodate it. It's a challenging job so it's recommended you get a professional assist you if you don't have the expertise or experience. It is also recommended that you review the directions that come with the cat flap kit to learn how to do this properly.

To do this, you will need to determine the height of your cat's or kitten's belly. Use this as an indicator point. As a general rule put the flap about 10-15 centimeters above the ground. This is the standard height of the belly for cats. Your cat will be able to move through the flap comfortably and also give any other cats or curious neighbours a tough time trying to enter or leave.

Once you have determined the best location for the cat flap to be positioned, mark this location on the door using the help of a pencil. If your kit includes the template, place it over the door. Utilize the markings on the template to drill holes in each corner. Then, you should be able to cut the shape of the template and replace it with your cat flap.

If you are installing your cat flap inside the form of a door made of wood or uPVC, it is possible to do it yourself if feel confident enough to handle the jigsaw. Be cautious not to cut through the vertical rails or mullions of your door. You can use a jigsaw to cut your panel into a circle or square according to the way you'd like to cut it. Take your time and don't try to make the jigsaw cut faster.


Once the hole is cut, carefully fit the cat flap into its new home and make sure that it's securely fixed. If it features screw caps, then push these onto the protruding screws. After the screws are installed smooth the edges and seal any gaps. This will stop the entry of draughts into your home.

Place the Flap

If you have an ordinary cat flap, you can try to encourage your pet to go through it by placing a small amount cat food on the top of the door. Alternatively you can try pushing the cat through using your hand or a stick. Once your pet has become used to moving through the flap, it will be capable of walking through the flap whenever it wants. This allows you to let it in and out as it wants.

You can install an animal flap inside a UPVC or glass door however it's not exactly the same as fitting one into a timber external door since the UPVC and glass doors don't have a consistent thickness. This could have a significant impact on how you cut the flap's hole, and whether the flap will fit correctly after installation.

Based on the type of cat flap you choose, it may include a mounting kit and a template that will show you exactly where to drill the holes for it. If the kit does not include an example you can use a photocopier to create your own. It's important to not use the jigsaw to hard when cutting, so that it doesn't create a larger than needed hole in your door.

The majority of cat flaps are square or rectangular in shape, however there are also some which are circular, and are generally more difficult to install. If you have a circular flap it's important to make sure the hole is in the right location on your door as in the event that it's not, the cat can't use it and could be stranded in the open all day (or even night).

Some cat flaps have locks that allow you to determine when your cat is allowed to enter and leave. They are helpful when your cat is scared of leaving in the dark or coming back in the dark. They can also be useful if you work all day. Some locks can be used for either entry or exit, and others can be locked both ways. This is beneficial for older cats or sick cats who aren't keen to go outside in bad weather.

Homepage: https://squareblogs.net/profitpet6/get-a-upvc-door-panel-with-cat-flap-fitted