Notes

This Week's Most Remarkable Stories Concerning Patio Door Lock Repair
Patio Door Lock Repairs

Over time, patio doors go through wear and tear that could lead to locks that fail. There are fortunately, a number of simple and effective steps that can help restore your uPVC patio door's security.

It's about realigning the lock or cleaning the locking mechanism These simple fixes can increase the security of your home.

Clean the Lock

While patio doors are a great option to let in the outside and keep out the elements but they can also pose security risks in the event that your lock isn't operating as it should. As time passes, wear and tear, extreme cold and hot weather dirt and debris can cause damage to the lock on your patio door and make it difficult to open. With a little care, you can make sure that your lock for your patio door always works properly.


It is important to first clean the patio door lock and all moving parts. This helps to get rid of any grime and coatings that could hinder the lock from functioning in the way it should. Start by wiping down the moving parts of the lock for your patio door using a damp cloth. then use a scouring pad or rough damp cloth to scrub any difficult-to-access areas of the door and frame that are ingrained with dirt. It is recommended to wipe the entire lock with dry cloths to eliminate any remaining dampness and allow it to air dry prior to using it again.

If you have a patio door that uses a pin tumbler latch mechanism You can lubricate the lock by applying graphite powdered to the key or using a Teflon-based lubricant such as WD-40 Multi-Use Product. This type of lubricant can be easy to apply and it won't disintegrate with time. If you're unable to find the right lubricant for your lock, you can make use of a pencil with a larger tip. Insert the pencil in the lock, then shake it to distribute the graphite.

Regular maintenance is also required to keep the tracks of sliding patio doors clear from dirt, dust and other debris. They are particularly vulnerable to snow and ice, which can cause them become stuck or slack and make it difficult for your patio doors to open and close.

Tracks for sliding patio doors and rollers can be cleaned by removing dirty or damaged weather stripping and then cleaning it, before reinstalling it. The same is true for patio door rollers, which can be cleaned and then sprayed with a non-stick lubricant in order to allow them to move freely.

Lubricate the moving parts

uPVC French doors, like sliding patios, are operated with 3 to 4 or sometimes, 5 points locking mechanisms. They include the handle and lock cylinder that is operated with keys. These doors require maintenance, lubrication of the moving parts. This can be done using the use of a thin oil, but never WD40. It is recommended to do it every year, at a minimum.

If hinges that are sagging don't cause the problem it could be because the door isn't aligned. It may be rubbing or catching the strike plate's opening in the frame. Remove the strike plate, and employ a sharp tool to increase the size of its mortise. This lets the latch sit correctly in the hole and avoids scratching or catching on the frame.

When the cylinder is out of the way take a measurement of its width using a book or piece of wood that can fit into the gap between the adjustment screw and the lock. The outer dimension is measured from the outside of the door to the center cylinder. The inner dimension is measured from the center adjustment screw to the end cylinder.

Verify tilt and slide patio door repairs near me of the lock.

If your patio door latch is difficult to turn even after oiling and cleaning it's possible that it is not aligned with the strike plate. Make sure that your door is in a balanced position, and if the hinge screws are tight. In most instances, moving the strike plate upwards or downwards can solve the issue.

Most of the time, the issue occurs when the strike of the lock is too small for the latch to properly engage. In this case, enlarge the opening with an hammer and chisel. Then test the latch to ensure that it does not rub against the jamb frame of the door or fall the frame.

Before you purchase a replacement lock, you should first identify the type of mortise lock you have. This can be done by looking at the faceplate and noting whether it is round or square. Examine each screw hole on the current lock and note the size. This will enable you to locate the replacement lock that has the exact same width and will fit into your existing hole.

In addition to identifying the mortise lock that is currently in use, you should also examine it for any scratches or bends that may need repairing. A damaged or bent latch is more likely than one that's frequently used to break. Replace the lock if you notice signs of damage.

After you've examined the lock and determined which kind of replacement you require, it's time to start working on the actual repair. The spindle and handle must be removed from the patio door. Insert the new handle. Begin by installing the interior handle. Align it with the spindle, and then secure it in by using two bolts or screws. Install the exterior handle following the interior handle. After you've completed these steps check the handles to make sure they are able to open and close easily and that the latch works correctly with the strikeplate.

Check the Door's Strike

The door latch and strike plate are two parts of the lock that work together to ensure that the latch is secure the door. A misaligned strike plate or door latch will result in the latch not being able to latch the door properly. Fortunately, this issue is usually easy to correct.

Check the holes for receiving of the strike plate to ensure they are clear of obstructions such as dirt or plastic plugs. Remove the screws that hold the strike plate in place. This will allow it to move vertically, but not separate it from the frame. Adjust the strike plate to align its holes for receiving with the latch hooks of the door latch. Once the strike plate has been adjusted, tighten all screws and check if the door closes smoothly.

These plates are difficult to reach for homeowners who have sliding patio doors. However they are crucial to secure and unlock your door. The plates made of metal are located on the top and bottom jambs of the door, where they support its latch. Then, the door latch is placed on the strike plate, creating an airtight seal when closed. If the strike plate is damaged, rusted, or is not installed correctly, the latch may not be able to lock the door properly.

A misalignment of the strike plate and latch is one common cause for a patio lock to not close or stay. This can be confirmed using the "lipstick" test. Apply some lipstick on the outside of the deadbolt, then cover it with masking tape. The lipstick will leave an impression when you shut the door. This will reveal exactly where the latch connects to the strike plate. If the mark is too high or low you can alter the strike plate.

Sliding patio door locks help keep your home safe from burglars, and if they're not functioning correctly, you should fix the problem quickly. Follow these steps to fix your patio door lock and restore its function.

Homepage: https://www.repairmywindowsanddoors.co.uk/harrow-patio-door-repairs-near-me/